Page 337 of 392
3. Rotate the bulb socket from the housing. 4. Pull bulb straight out of socket.
Rotating Bulb Socket From HousingPulling Bulb From Socket
MAINTAINING YOUR VEHICLE 337
7
Page 338 of 392
5. Reverse Procedure to install bulb and housing. Place
the two raised blocks passed the body.Center High-Mounted Stoplamp And Cargo Lamp
1. Remove the two (2) screws holding the housing/lens
to the body as shown.
Sliding Raised Blocks Past Body
Removing Screws
338 MAINTAINING YOUR VEHICLE
Page 339 of 392
2. Remove housing from Cab. 3. Remove connector from housing tab for more clear-
ance.
Removing Housing from Cab
Removing Connector from Tab
MAINTAINING YOUR VEHICLE 339
7
Page 340 of 392