Downloaded from www.Manualslib.com manuals search engine 392
AXLES
SUSPENSION
STEERING
A> B =Negative figure: – = TOE-OUT A < B = Positive figure: + = TOE-INNOTE
AXLE GEOMETRY
Measurements at reference height (compress the suspension to obtain the calculated values).
Vehicles all engine versions (except CRD (*))
Front axle Rear axle
Vehicle Tracking CastorPivot angleCamber Tracking Camber
Adjustable Yes No
ALL TYPES- 1 ± 1 mm3,7 ± 1,3 mm
- 0°18’ à 0°0’2°56’ ± 18’ 10°25’ ± 30’ 0°07’ ± 30’
- 0°33’ ± 0°12’- 1°14’ ± 18’
XSARA PICASSO
B3CP02UC
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 392
Downloaded from www.Manualslib.com manuals search engine 396
AXLES
SUSPENSION
STEERING
TIGHTENING TORQUES: POWER-ASSISTED STEERING
Tightening torques (m.daN).
(7) Pivot ball-joint nut: 4 ± 0.4
(8) Steering rod adjusting lock nut: 4.5 ± 0.4
(9)Ball-joint on steering rack: 6 ± 0.6
(10) Fixing steering on subframe: 8 ± 0.8
(11)Hydraulic pipe connection: 2.4 ± 0.2
(12)Power steering valve: 1.2 ± 0.2
(13)Plunger flange screws: 1.2 ± 0.2
(14)Steering ram screw on housing: 9 ± 1
(15) Steering ram screw on yoke: 9 ± 1
NOTE:When removing the steering, it is imperative to replace screws
(14)and (15)
(new screws).
B3EP117D
XSARA PICASSO
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 396
