8-25
6. Install the oil filler bolt, and then tighten it to
the specified torque.
cC
8Make sure that no foreign material enters
the final transmission case.
8Make sure that no oil gets on the tires or
wheels.
Recommended oil:
See page 10-2.
Oil quantity:
0.6 L
1C5-9-60-08 9/12/03 8:38 PM Page 8-26
8-75
EBU01112
Wheel removal
1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU01150
Wheel installation
1. Install the wheel and the nuts.
NOTE:
Tapered wheel nuts are used for both front and
rear wheels. Install the nut with its tapered side
towards the wheel.
2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
torque.
q
1. Tapered wheel nut1. Roue et les écrous1. Rueda y las tuercas
Tightening torque:
Front wheel nut:
55 Nm (5.5 m0kgf)
Rear wheel nut:
55 Nm (5.5 m0kgf)
1C5-9-60-08 9/12/03 8:38 PM Page 8-76
