2004 YAMAHA GRIZZLY 125 lights

LOCATION OF THE WARNING AND
SPECIFICATION LABELS .......................1-1
SAFETY INFORMATION .........................2-1
DESCRIPTION AND MACHINE
IDENTIFICATION.....................................3-1
Identification number records ...............3-3
Key identification number .....................3-5
Vehicle identification number ...............3-5
Model label ...........................................3-7
CONTROL FUNCTIONS..........................4-1
Main switch ...........................................4-1
Indicator lights ......................................4-3
Handlebar switches ..............................4-5Throttle lever ......................................4-11
Speed limiter ......................................4-13
Front brake lever ................................4-15
Rear brake lever .................................4-15
Parking brake .....................................4-17
Drive select lever ................................4-19
Fuel tank cap ......................................4-19
Fuel cock ............................................4-21
Starter (choke) ....................................4-23
Seat ....................................................4-25
Front carrier ........................................4-27
Rear carrier ........................................4-27
PRE-OPERATION CHECKS ...................5-1
Front and rear brakes ...........................5-5
Fuel ......................................................5-7
Engine and final transmission oil ........5-11
EBU00015
CONTENTS
1
2
3
4
5
1C5-9-60-01 11/12/03 7:26 PM Page 12

Chain ..................................................5-15
Throttle lever ......................................5-15
Fittings and fasteners .........................5-15
Lights ..................................................5-17
Switches .............................................5-17
Battery ................................................5-17
Tires ...................................................5-19
How to measure tire pressure ............5-23
Tire wear limit .....................................5-25
OPERATION ............................................6-1
Starting a cold engine ...........................6-3
Starting a warm engine ......................6-11
Warming up ........................................6-11
Drive select lever operation and reverse
driving ...............................................6-13
Engine break-in ..................................6-19Parking ...............................................6-23
Parking on a slope ..............................6-25
Accessories and loading ....................6-27
Riding Your ATV ......................................7-1
Getting to know your ATV.....................7-3
Ride with care and good
judgement ...........................................7-5
Be careful where you ride ...................7-29
Turning your ATV ...............................7-41
Climbing uphill ....................................7-45
Riding downhill ...................................7-57
Crossing a slope .................................7-61
Crossing through shallow water .........7-65
Riding over rough terrain ....................7-69
Sliding and skidding ...........................7-71
What to do if .......................................7-75
What to do ..........................................7-75
6
7
1C5-9-60-01 11/12/03 7:26 PM Page 13

2-15
8Never exceed the stated load capacity for an
ATV. Cargo should be properly distributed
and securely attached. Reduce speed and fol-
low instructions in this manual for carrying
cargo. Allow greater distance for braking.
w
8Always turn off the engine when refueling.
8Do not refuel right after the engine has
been running and is still very hot.
8Do not spill gasoline on the engine or
exhaust pipe/muffler when refueling.
Never refuel while smoking, or while in the
vicinity of sparks, open flames, or other
sources of ignition such as the pilot lights
of water heaters and clothes dryers.
Gasoline can catch fire and you could be
burned.
1C5-9-60-02 9/12/03 8:45 PM Page 16

4-1
EBU00040
CONTROL FUNCTIONS
EBU09420
Main switch
Functions of the respective switch positions are
as follows:
ON:
The engine can be started only at this position
and the headlights and taillight come on when
the light switch is on.
OFF:
All electrical circuits are switched off. The key
can be removed in this position.
OFF ON
1C5-9-60-04 11/12/03 7:26 PM Page 2

4-3
EBU00043
Indicator lights
EBU12500
Reverse indicator light “R”
This indicator light comes on when the drive
select lever is in the “R” position.
EBU09720
Neutral indicator light “N”
This indicator light comes on when the drive
select lever is in the “N” position.
12
1. Reverse indicator light “R”
2. Neutral indicator light “N”
1. Témoin de marche arrière “R”
2. Témoin de point mort “N”
1. Luz de control de marcha atrás “R”
2. Luz de control de punto muerto “N”
1C5-9-60-04 11/12/03 7:26 PM Page 4

4-5
EBU00053
Handlebar switches
EBU11580
Engine stop switch “ENG. STOP”
Make sure that the engine stop switch is in the
“RUN” position before starting the engine. The
engine stop switch controls ignition and can be
used at all times to stop the engine, especially in
an emergency. The engine will not start or run
when the engine stop switch is turned to “OFF”.
EBU00056
Start switch “START”
The starter motor cranks the engine when this
switch is pushed.
cC
See starting instructions prior to starting
engine (see page 6-3 for details).
w
q
e
1. Engine stop switch “ENG. STOP”
2. Light switch “LIGHTS”
3. Start switch “START”
1. Coupe-circuit du moteur “ENG. STOP”
2. Contacteur d’éclairage “LIGHTS”
3. Contacteur de démarreur “START”
1. Interruptor de paro del motor “ENG. STOP”
2. Interruptor de luces “LIGHTS”
3. Interruptor de arranque “START”
1C5-9-60-04 11/12/03 7:26 PM Page 6

4-7
NOTE:
If the starter switch is pushed with the main
switch “ON” and the engine stop switch “OFF”,
the starter motor will be activated but the engine
will not start. To start the engine, be sure to
position the engine stop switch at “RUN”.
EBU14770
Light switch “LIGHTS”
Set the switch to the “LO” position to turn on the
low beam and the taillight.
Set the switch to the “HI” position to turn on the
high beam and the taillight.
Set the switch to the “OFF” position to turn off all
of the lights.
1C5-9-60-04 11/12/03 7:26 PM Page 8

4-8
N.B.:
Si le contacteur du démarreur est enfoncé alors
que la clé de contact est sur “ON” et le coupe-
circuit du moteur sur “OFF”, le démarreur tour-
nera mais le moteur ne se mettra pas en marche.
Avant de mettre le moteur en marche, s’assurer
que le coupe-circuit du moteur est sur “RUN”.
FBU14770
Contacteur d’éclairage “LIGHTS”
Placer le contacteur à la position “LO” pour
allumer les feux de croisement et le feu arrière.
Placer le contacteur à la position “HI” pour allu-
mer les feux de route et le feu arrière.
Placer le contacteur sur “OFF” pour éteindre
tous les feux.
NOTA:
Si se pulsa el interruptor de arranque con el
interruptor principal en “ON” (contacto) y el inte-
rruptor de paro del motor en “OFF” (desconecta-
do), se activará el motor de arranque pero el
motor principal no se pondrá en marcha. Para
que arranque, coloque el interruptor de paro del
motor en la posición “RUN”.
SBU14770
Interruptor de luces “LIGHTS”
Ponga el interruptor en la posición “LO” para
encender la luz de cruce y la luz de cola.
Ponga el interruptor en la posición “HI” para
encender la luz de carretera y la luz de cola.
Ponta el interruptor en la posición “OFF” para
apagar todas las luces.
1C5-9-60-04 11/12/03 7:26 PM Page 9