2004 YAMAHA GRIZZLY 125 headlight bulb

PERIODIC MAINTENANCE AND
ADJUSTMENT .........................................8-1
Owner’s manual and tool kit .................8-3
Periodic maintenance/Lubrication ........8-7
Engine oil ............................................8-13
Final transmission oil ..........................8-21
Spark plug inspection .........................8-27
Engine air filter element and V-belt
case air filter element cleaning .........8-31
Idle speed adjustment ........................8-43
Valve clearance adjustment ...............8-45
Throttle lever adjustment ....................8-45
Front and rear brake shoe
inspection .........................................8-47
Front brake lever free play
adjustment ........................................8-49
Rear brake adjustment .......................8-59
Drive chain slack check ......................8-61
Drive chain slack adjustment ..............8-63Lubricating and drive chain ................8-67
Draining the V-belt compartment ........8-69
Cable inspection and lubrication ........8-71
Brake lever lubrication ........................8-73
Knuckle shaft, lower arms and
steering shaft lubrication ..................8-73
Wheel removal ...................................8-75
Wheel installation ...............................8-75
Battery ................................................8-77
Replenishing a battery fluid ................8-81
Fuse replacement ...............................8-85
Replacing the headlight bulb ..............8-87
Tail/brake light bulb replacement .......8-91
Headlight beam adjustment ................8-93
Troubleshooting ..................................8-95
Troubleshooting chart .........................8-998
1C5-9-60-01 11/12/03 7:26 PM Page 14

8-87
EBU14813
Replacing a headlight bulb
If a headlight bulb burns out, replace it as fol-
lows.
1. Remove the cover at the rear of the head-
light by pulling it off.
2. Remove the bulb holder cover by pulling it
off.
3. Remove the bulb holder by pushing it
inward and turning it counterclockwise.
1
1
2
1. Cover1. Cache1. Cubierta
1. Bulb holder cover 2. Bulb holder
1. Cache de la fixation d’ampoule 2. Fixation d’ampoule1.Cubierta del portabombillas tirando2. Portabombillas
1C5-9-60-08 9/12/03 8:38 PM Page 8-88

1
1. Headlight bulb1. Ampoule de phare1. Billas del faro
8-89
4. Remove the defective headlight bulb by
pulling it out of the socket.
w
A headlight bulb is hot when it is on and
immediately after it is turned off. Wait for the
bulb to cool before touching or removing it.
You can be burned or a fire could start if the
headlight bulb touches something flamma-
ble.
5. Install a new headlight bulb into position.
6. Install the bulb holder by pushing it inward
and turning it clockwise.
7. Install the bulb holder cover.
8. Install the cover at the rear of the headlight.
1C5-9-60-08 9/12/03 8:38 PM Page 8-90

10-5
Model YFM125
Shock absorber:
Front Coil spring/Oil damper
Rear Coil spring/Oil damper
Wheel travel:
Front 70 mm
Rear 80 mm
Electrical:
Ignition system DC. C.D.I.
Charging system A.C. Magneto
Battery type/voltage, capacity 12N12C-4A-2/12V, 12Ah
Headlight type: Bulb
Bulb volgate, wattage ×quantity:
Headlight 12V, 30 W/30 W ×2
Tail/brake light 12V, 5 W/21 W ×1
Indicator light:
Neutral 12V, 1.7 W ×1
Reverse 12V, 1.7 W ×1
Fuse: 15A
1C5-9-60-09~11 15/12/03 7:59 PM Page 16