A62730
A62953
A62961
Continuity
A62962
No Continuity
A62963
± STARTING & CHARGINGSTARTER ASSY(2.0KW) (1CD±FTV)
19±11
1CD±FTV ENGINE REPAIR MANUAL (RM927E)
9. REMOVE STARTER CLUTCH SUB±ASSY
(a) Using a screwdriver, tap in the stop collar towards the
starter clutch.
(b) Using a screwdriver, pry out the snap ring.
(c) Remove the stop collar from the shaft.
10. INSPECT STARTER ARMATURE ASSY
(a) Using an ohmmeter, check that there is continuity be-
tween the segments of the commutator.
If there is no continuity between any segments, replace the ar-
mature.
(b) Using an ohmmeter, check that there is no continuity be-
tween the commutator and armature coil core.
If there is continuity, replace the armature.
(c) Check the commutator for the dirty and burnt surface.
If the surface is dirty or burnt, correct with sandpaper (No.400)
or a lathe.
(d) Place the commutator on V±blocks.
(e) Using a dial indicator, measure the circle runout.
Maximum circle runout: 0.03 mm (0.0012 in.)
If the circle runout is greater than maximum, correct it on a lathe.
