2004 TOYOTA CELICA Owners Manual

Page 73 of 266

TOYOTA CELICA 2004 T230 / 7.G Owners Manual ’04MY CELICA U (L/O 0308)
65
2004 CELICA from Aug. ’03 Prod. (OM20823U)
OPERATION OF INSTRUMENTS AND
CONTROLS
Steering wheel and Mirrors
Tilt steering wheel66
. . . . . . . . . . . . . . . . . . .

Page 74 of 266

TOYOTA CELICA 2004 T230 / 7.G Owners Manual ’04MY CELICA U (L/O 0308)
66
2004 CELICA from Aug. ’03 Prod. (OM20823U)
To change the steering wheel angle,
hold the steering wheel, push the lock
release lever, tilt the steering wheel to
the des

Page 75 of 266

TOYOTA CELICA 2004 T230 / 7.G Owners Manual ’04MY CELICA U (L/O 0308)
67
2004 CELICA from Aug. ’03 Prod. (OM20823U)
CAUTION
Do not adjust  the mirror while the
vehicle is moving. Doing so may
cause the driver to mishandle the ve-
hicle and

Page 76 of 266

TOYOTA CELICA 2004 T230 / 7.G Owners Manual ’04MY CELICA U (L/O 0308)
68
2004 CELICA from Aug. ’03 Prod. (OM20823U)
Adjust the mirror so that you can just
see the rear of your vehicle in the mir-
ror.
To reduce glare from the headlights of

Page 77 of 266

TOYOTA CELICA 2004 T230 / 7.G Owners Manual ’04MY CELICA U (L/O 0308)
69
2004 CELICA from Aug. ’03 Prod. (OM20823U)
OPERATION OF INSTRUMENTS AND
CONTROLS
Lights, Wipers and Defogger
Headlights and turn signals70
. . . . . . . . . . . . . .

Page 78 of 266

TOYOTA CELICA 2004 T230 / 7.G Owners Manual ’04MY CELICA U (L/O 0308)
70
2004 CELICA from Aug. ’03 Prod. (OM20823U)
Ty p e A
Ty p e B
HEADLIGHTS
To turn on the following lights: Twist
the headlight/turn signal lever knob.
Position 1—Parki

Page 79 of 266

TOYOTA CELICA 2004 T230 / 7.G Owners Manual ’04MY CELICA U (L/O 0308)
71
2004 CELICA from Aug. ’03 Prod. (OM20823U)
The headlights automatically switch to full
or reduced brightness depending on the
darkness of the surroundings when the
day

Page 80 of 266

TOYOTA CELICA 2004 T230 / 7.G Owners Manual ’04MY CELICA U (L/O 0308)
72
2004 CELICA from Aug. ’03 Prod. (OM20823U)
TURN SIGNALS
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The key must be in the “ON