2004 SUZUKI GRAND VITARA Service Workshop Manual

YH4
GRAND
VITARA
1. Side body inner panel
2. Rear wheel housing panel
3. Rear floor panel
4. Center floor panel
5. Front floor panel
6. Center floor member
7. Side sill inner panelªAº: Apply sealant
ªBº: Brush treatment
BODY SERVICE 9-47
2 DOOR MODEL

YH4
GRAND
VITARA
9-48 BODY SERVICE
1. Cowl top panel
2. Dash panel
3. Cowl front panel
4. Front floor panel
5. Front pillar inner lower panelªAº: Apply sealant
ªBº: Brush treatment

YH4
GRAND
VITARA
BODY SERVICE 9-49
1. Side body inner panel
2. Side body outer panel
3. Front pillar inner panel
4. Front pillar upper reinforcement
5. Rear wheel housing panel
6. Fuel inlet box
7. Center pillar reinforcement
8. Center pillar joint outer panel
9. Center pillar joint inner panel
10. Tail upper member
11. Back pillar outer panelªAº: Apply sealant
ªBº: Brush treatment
ªCº: Wipe

YH4
GRAND
VITARA
9-50 BODY SERVICE
Sealant width ªWº: more than 5 mm Be free from protrude
of sealant outside from
this line.
ªAº: Apply sealant

YH4
GRAND
VITARA
ªaº: 200 mm (7.87 in.)
ªbº: 100 mm (3.94 in.)
ªAº: Apply rust proof wax (hot wax 50
m or more)
ªBº: Apply rust proof wax (high viscosity wax 50
m or more)1. Side body outer
2. Side sill inner
3. Frame
4. Main floor
5. Rear fender
6. Rear wheel housing
7. Center floor
BODY SERVICE 9-51
UNDERCOATING / ANTI-CORROSION COMPOUND APPLICATION AREA
4 door model

YH4
GRAND
VITARA
ªaº: 30 mm (1.18 in.)
ªbº: 100 mm (3.94 in.)
ªAº: Apply undercoating (PVC, 400
m or more)
ªBº: Additional applying of under coating
ªBº: (for 5 door vehicle without splush guard)
ªCº: Apply PVC chip resistant material (200
m or more)1. Side body outer
2. Side sill inner
3. Main floor
4. Front fender
5. Front wheel housing
6. Frame
7. Dash panel
8. Center floor
9. Rear floor
Vehicle produced in IWATA
VIEW: Z
9-52 BODY SERVICE

YH4
GRAND
VITARA
ªaº: 30 mm (1.18 in.)
ªbº: 100 mm (3.94 in.)
ªAº: Apply undercoating (PVC, 400
m or more)
ªBº: Additional applying of under coating
ªBº: (for 5 door vehicle without splush guard)
ªCº: Apply PVC chip resistant material (200
m or more)1. Side body outer
2. Side sill inner
3. Main floor
4. Front fender
5. Front wheel housing
6. Frame
7. Dash panel
8. Center floor
9. Rear floor
Vehicle produced in CAMI
VIEW : Z
BODY SERVICE 9-53

YH4
GRAND
VITARA
9-54 BODY SERVICE
ªaº: 240 mm (9.45 in.)
ªbº: 20 mm (0.79 in.)
ªcº: 40 mm (1.57 in.)
ªdº: 134 mm (5.28 in.)
ªeº: 177 mm (6.97 in.)
ªAº: Black paintªAºªeº
Vehicle produced in CAMI