2004 SKODA OCTAVIA TOUR brake

41
CONTROLS AND EQUIPMENT
Information for drivingStarting engineThe engine can only be started if the selector
lever is in position „N“ or „P“ - see page 44.Selecting a forward gear
Always first of all depress the brake pe-
dal before selecting a forward gear when
the vehicle is stationary and the engine
is running.
Do not depress the accelerator when
moving the selector lever if the car is sta-
tionary.
If you inadvertently move the gearshift
lever into position „N“ when driving, you
first of all have to release the accelera-
tor and wait until the engine is running
at idle speed before again engaging a
forward gear. Warning
When the engine is idling and the car
is stationary (e.g. at traffic lights or
when stopped in congested traffic)
it is always necessary to depress the
brake pedal in order to hold the ve-
hicle no matter the selector lever po-
sition, because the power transmis-
sion is not fully interrupted even
when the engine is idling and the car
may creep forward.
If a forward gear is engaged when the
vehicle is stationary, on no account
inadvertently operate the throttle
(e.g. by hand from the engine com-
partment) otherwise the car will im-
mediately move forward - this may
also happen even if the handbrake is
properly applied.
Move selector lever into position „P“
and apply the handbrake before car-
rying out any work on the running
engine.
Driving off
Select a gear (
R, D , 3 , 2 , 1 ). Wait until the
gearbox has shifted into gear and the
power is transmitted to the driven wheels
(can be felt from a slight engagement jolt)
before then pressing the accelerator.
Coming to a stop
You do not have to move the selector lever
to position „N“ if stopped only for a short
time, e.g. at traffic lights. It is sufficient to
hold the car with the brake. The engine
must only be running at idling speed, how-
ever.
Parking
On the flat it is sufficient to engage the Park
lock. If parked on a downhill stretch, first of
all apply the handbrake fully and then en-
gage the Park lock. Doing this ensures that
there is no excessive stress acting on the
Park lock mechanism and the Park lock can
be more easily released.
Warning
When the car is parked, the selector
lever should always be moved into
position „P“ for only this position
prevents the car moving off by itself.

44CONTROLS AND EQUIPMENTFor all models:Position 1
To lock the steering wheel , withdraw key
and turn wheel until you hear the locking
pin engage.
Warning
Do not withdraw key from lock until
vehicle is stationary! The steering
lock might otherwise unintentionally
engaged.
Note
If you forget to switch off the side lights or
a turn signal light, an audible signal will
sound after you switch off the ignition or
withdraw the key and then open the driv-
er’s door.
Position 2
If the key is difficult to turn in the lock or
cannot be turned to this position at all, move
the steering wheel back and forward slightly
to release the locking pin. Warning
If the vehicle is allowed to roll, the
ignition key must be in position 2 in
the lock - ignition on. This position
is also indicated by the warning
lights coming on. Failure to turn the
ignition key into this position can
result in the steering locking uninten-
tionally.
Do not withdraw the ignition key un-
til after the vehicle has come to a stop
and has been properly secured to
prevent it moving by applying the
handbrake or engaging a gear.
Position 3
The starter is operated when the key is
turned into this position. The ignition key
must be turned back each time into posi-
tion „1“ before again attempting to start the
engine. The starter repeat lockout in the ig-
nition lock prevents the starter again being
operated when engine is already running.
When the key is in this position, the main/
low beam headlights and other major elec-
trical components which are on, are then
switched off.
The starter may only be operated (ignition
key position 3), if the engine is not run-
ning. If the starter is immediately operated
after switching off the engine, the starter
or the engine can be damaged.
Starting engineGeneral notesWarning
Never run the engine in non-venti-
lated or enclosed areas, the exhaust
gases of the engine contain besides
the odourless and colourless carbon
monoxide a poisonous gas - hazard!
Carbon monoxide can cause uncon-
sciousness and death.
Never leave your vehicle unattended
with the engine running.

Before starting, move gear lever into
Neutral (selector lever of automatic gear-
box into position „P“ or „N“ ) and apply
handbrake firmly.

On models with a manual gearbox, de-
press the clutch pedal when operating
starter so that the starter only has to crank
the engine.

As soon as engine starts, release igni-
tion key immediately - otherwise the starter
may suffer damage.

After starting a cold engine, it may sound
noisy for a moment or two because the oil
pressure has to build up in the hydraulic
tappets first.
Do not warm engine up by running it with vehicle stationary. Drive off
straight away.

46CONTROLS AND EQUIPMENTIf the engine does not start, once again pre-
heat and start once again as described. If
the engine still does not fire, the fuse for
the diesel glow plug system may have
blown - see page 167.
Contact your Škoda Dealer.
Starting a warm engine
If the engine is already at operating tem-
perature when started, the glow warning
lamp does not come on - the engine can
be started straightaway.
Switching off engineDo not switch off the engine immediately
after operating it for a lengthy period at
high engine loads, but allow it to run at
idling speed for about 2 minutes to avoid
any build-up of heat.Warning
Never switch off the engine before
the vehicle is stationary - risk of ac-
cident!
The brake booster only operates
when the engine is running. Greater
physical effort for braking is required
when engine is switched off. Be-
cause if you do not stop as normal,
this can cause an accident and se-
vere injuries.
After the ignition has been switched
off, the fan may continue running for
a while (up to about 10 minutes) with
the ignition switched off. It may also
start to run again suddenly after a
short time if
- the coolant temperature increases
due to heat build-up
- when engine is warm and the en-
gine compartment is heated addi-
tionally by strong sunlight.
Special care must therefore be taken
when working in the engine compart-
ment!
Audible signalsThe status of certain systems is indicated
by an audible signal sounding; refer to the
chapters on:
- Audible signal when reversing - page 47
- Excess speed signal - page 47
- Warning lamp - page 56
- Information display - page 53
- Switch - page 62.
The audible signal may also sound when
using a car radio - see operating instruc-
tions of the radio.

58CONTROLS AND EQUIPMENTCoolant temperature, coolant
levelThe warning light comes on for a few se-
conds after switching on the ignition.
On vehicles with information display, the
warning light does not come on after switch-
ing on the ignition, only if a fault exists or a
lack or coolant.
If the warning light does not go off after this
or flashes when driving, either the coolant
temperature is too high or the coolant level
is too low.
Text in the information display*: STOP CHECK
COOLANT SERVICE MANUAL.
An audible warning signal then sounds
(peep signal 3 times).
If this happens, stop the car and switch
off the engine ; check the coolant level and
top up coolant if necessary.
If the warning light comes on, although the
coolant is at the correct level and the fan
fuse is in proper order, do not drive any
further. The engine must then also not run
in neutral. Contact a Škoda Dealer for pro-
fessional assistance.
Warning

Take care when opening the cool-
ant expansion tank. When the engine
is hot, the cooling system is pressu-
rized - risk of scalding! Allow the
engine to cool down, therefore, be-
fore unscrewing the cap.

Do not touch the fan! The fan may
switch on suddenly - even if the igni-
tion is switched off.
If the coolant is at the correct level, the rise
in temperature may be caused by a failure
of the radiator fan. Check the fuse of the
radiator fan and renew if necessary - see
page 167.
If the warning light does not go out althou-
gh the coolant is at the correct level and
the fan fuse is in proper order, do not drive
any further . Contact a Škoda Dealer for
professional assistance.
Further information is provided on pages
137 and 142.
Brake wear indicator*If this warning light comes on, contact a
Škoda Dealer to have the brake pads chec-
ked.
An audible warning signal sounds (single
peep signal).
In view of the fact that the brake wear indi-
cator monitors only the front brake pads, it
is recommended to also have the rear
brake pads or linings inspected.Fuel levelThe warning light comes on and remains
on if there are only about 7 litres of fuel in
the tank.
An audible warning signal sounds (1 beep).

60CONTROLS AND EQUIPMENTOpening doors*If a door is open, this is indicated by this
warning light.
Vehicles with information display
As an additional warning signal, a peep
sounds if the car is driven at a speed of
more than 6km/hour and if the door or the
luggage compartment door is open.Washer fluid level*The warning light comes on if the washer
fluid level is too low. Top up washer fluid -
see page 151.
An audible warning signal also sounds (sin-
gle peep signal).Bulbs*This warning light comes on if the bulb of
the luminous element is faulty during:

Operation of brakes (brake light)

Malfunction of illumination (low beam (or
fog light)
An audible warning signal also sounds (sin-
gle peep signal)
Testing engine electronics*The warning light comes on when the igni-
tion is switched on.
If the warning light does not go out after
starting the engine, or comes on or flashes
when driving, this indicates a fault in the
engine electronics system or in systems
which influence exhaust emissions. A pro-
gramme stored in the engine control unit
makes it possible to continue driving with
certain restrictions - contact a Škoda dealer
for professional help.Electronic stability
program (ESP)*The warning light comes on for a few se-
conds when the ignition is switched on.
The ESP system also includes the traction
control system (TCS).
The light flashes when driving if the system
has activated a control cycle.
The warning light will come on and remain
on if the system is switched off or if a sy-
stem fault exists.
As the ESP system operates in combination
with the ABS, EDL and EBC, the ESP warn-
ing light also comes on if the ABS system fails.
Further details are given on pages 84 and
122 - 124.
Traction control system (TCS)*The warning light comes on for a few se-
conds when the ignition is switched on.
The light flashes when driving if the system
has activated a control cycle.
The warning light will come on and remain
on if the system is switched off or if a sy-
stem fault exists.
As the TCS system operates in combinati-
on with the ABS, EDL and EBC, the TCS
warning light also comes on if the ABS sy-
stem fails.
Further details are given on pages 65 and
122 - 124.Anti-lock brake system (ABS)*The warning light monitors the ABS, or ABS
and EDL* system.
The ABS warning light should come on for
a few seconds when the ignition is switched
on. If the ABS warning light does not go off
after a few seconds, if it does not come on
at all, or comes on when driving, the sys-
tem is not operating properly. The car is
braked in this case without operation of the
ABS; only the normal brake system then
operates. Contact a Škoda Dealer as
soon as possible and adapt your style
of driving to the fault which exists for
you cannot know the extent of the pro-
blem.

61
CONTROLS AND EQUIPMENT
Electronic differential lock (EDL)*The EDL system operates in combination
with the ABS. A failure of the EDL system
is indicated by the ABS warning light co-
ming on. You should then contact a Škoda
Dealer without delay.
Models fitted with ESP are equipped with
electronic differential lock (EDL).
If a major fault is present in the ABS sy-
stem, an audible warning signal also
sounds (3 peeps). Further information on
the ABS and EDL systems is given on
pages 122 and 124.Electronic immobiliserWhen the ignition is switched on, a data
harmonization is performed between key
and control unit. If the data exchanged are
correct, this is confirmed by the warning li-
ght coming on for a few seconds.
If an unauthorized car key (e.g. forged key)
has been used, the warning light changes
to a continuous flashing light. It is then no
longer possible to start the car - see page
7.
Brake fluid levelThe warning light comes on for a few se-
conds after switching on the ignition.Warning
If the warning light comes on when
the ignition is switched on or when
driving, there is a fault in the brake
system. Contact the nearest Škoda
Dealer without delay and have the
brake system inspected.
An audible warning signal sounds
(3 peeps).
You can drive on carefully to the near-
est Škoda Dealer but allow for higher
pedal pressures, longer braking dis-
tances and greater idle travel of the
brake pedal.
The warning light also comes on when the
handbrake is applied.
Charge indicatorThe warning light comes on when the igni-
tion is switched on. It should go out when
the engine is started.
If the warning light comes on when driving
or does not go out after the engine has
started, stop the car and switch off the
engine. Check the ribbed belt.
If it is loose or broken, do not drive any
further . The belt has to be tensioned or
replaced.
If the ribbed belt is in proper order and the
warning light nevertheless comes on, it is
possible to drive on to the nearest Škoda
Dealer. In this case, the battery will not be
charged; switch off all unnecessary elec-
trical components in the vehicle.
An audible warning signal sounds (single
peep signal).Seat belt warning system*This warning light comes on to request the
driver to fasten the seat belt.
If the driver’s belt is not fastened, an audi-
ble warning signal sounds for 6 seconds.

64CONTROLS AND EQUIPMENT3 - Electronic stabilityprogram* ESPModels fitted with anti-lock brake system
(ABS) can be equipped additionally with an
electronic stability program (ESP).
The ESP makes it possible to enhance
control over the vehicle in situations in
which the vehicle is operating at the dyna-
mic limits, such as driving too fast into a
curve. The ESP is an extension of the ABS/
EBC//TCS/EDL function and reduces the
risk of skidding in all road conditions. The
system operates over the entire speed of
the vehicle in conjunction with the ABS. If
a fault develops in the ABS system, the ESP
then also does not operate.
The ESP is switched on automatically each
time the engine is started. It can be swit-
ched off and on, as desired, together with
the TCS system, by pressing the pushbut-
ton.
If the system is switched off, the ESP warn-
ing light comes on - see page 60.
In exceptional cases where wheel slip is
desired, it is beneficial to switch off the ESP
system. For example:
- when driving with snow chains
- when starting off in deep snow or on a
loose surface
- when rocking the car free if it has got stuck.
The system should be switched on again
after this.
Note
The same tyres must be fitted to all four
wheels if the ESP system is to operate
properly. Differing rolling circumferences of
the tyres can result in an undesirable re-
duction in engine output.
Repairs on the vehicle (e.g. on engine,
braking system, chassis or another combi-
nation of wheels and tyres) can influence
the function of the ESP.
Operating principle of ESP
The ABS, EBC, EDL, TCS systems are in-
tegrated in the electronic stability program.
In addition to the data available from these
functions, the ESP control unit is also sup-
plied with signals which are transmitted by
highly sensitive sensors. What is measu-
red is the spinning rotary motion about the
vertical axis of the vehicle, the lateral ac-
celeration of the vehicle, the brake pressu-
re and the steering lock.
Note
The direction selected by the driver is de-
termined with the aid of the movement of
the steering and the vehicle speed and
constantly compared with the actual behav-
iour of the vehicle. If variations exist, such
as the vehicle beginning to slide, the ESP
automatically brakes the wheel in question
and reduces engine speed.
The vehicle is again stabilised as a result
of the forces acting on the wheel during the
braking operation. If the vehicle is overs-
teering (tending to break away at the rear),
it is primarily the outside front wheel which
is braked, whereas, if the vehicle is under-
steering (tending to slide out of the curve),
the rear inner wheel is then braked.
Warning
The ESP system is also not able to
overcome the physical limits of the
vehicle. You should remember this,
particularly when driving on slippery
and wet road surfaces.
Your style of driving should always
be adapted to the condition of the
road and the traffic situation. The
enhanced safety offered by the ESP
must not tempt you to take any risks
which compromise your safety.

65
CONTROLS AND EQUIPMENT
3 - Traction control system* TCSVehicles fitted with the anti-lock brake sys-
tem (ABS) can additionally be equipped
with a traction control system (TCS).
On front-wheel drive vehicles, the TCS pre-
vents the driven wheels from slipping when
the car is accelerated, by reducing the en-
gine output. The system operates in com-
bination with the ABS over the entire vehi-
cle speed range. If a fault develops in the
ABS, the TCS is also affected.
The TCS switches on automatically when
the engine is started. If desired, the sys-
tem can be switched off and on by press-
ing the pushbutton.
If the system is switched off, the TCS warn-
ing lamp comes on - refer to page 60.
The TCS should always be switched on in
normal driving conditions. It is only benefi-
cial to switch off the system in certain ex-
ceptional cases if wheel slip is desired.For example:
- when driving with snow chains
- when starting off in deep snow or on a
loose surface
- when rocking the car free if it has got stuck.
The system should be switched on again
after this.
Note
The same tyres must be fitted to all four
wheels if the TCS system is to operate
properly. Differing rolling circumferences of
the tyres can result in an undesirable re-
duction in engine output.
Repairs on the vehicle (e.g. on engine,
braking system, chassis or another combi-
nation of wheels and tyres) can influence
the function of the ASR.
Warning
Always adapt your style of driving to
the condition of the road and the traf-
fic situation. The increased safety
offered by the TCS system must not
induce you to take risks with your
safety.
The traction control system greatly facili-
tates starting-off, accelerating and climb-
ing hills, or at all makes this possible, even
when driving on poor road conditions.
4 - Knurled wheel for seat heating*The cushion and backrest of the front seats
can be heated electrically when the igni-
tion is on.
The heater can be switched on with the
appropriate knurled wheel and regulated as
desired.
To switch heating off, turn knurled wheel to
the basic position „0“.
Note
Do not switch on the seat heater until after
starting the engine. This considerably re-
duces the drain on the battery capacity.5 - Releasing fuel filler flap from driver’s seat*The fuel filler flap opens when the switch is
pressed. For further information - see page
127.