2004 SATURN L-SERIES Owners Manual

Front Seats
Manual Seats
{CAUTION:
You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle
is moving. The sudden movement could startle
and confuse you, or make you push a pedal
when you do not want to. Adjust the driver’s
seat only when the vehicle is not moving.
Lift the bar located under the front of the seat to unlock
it. Slide the seat to where you want it and release
the bar. Try to move the seat with your body to be sure
the seat is locked in place.
Driver Seat Height Adjuster
If your vehicle has this feature, the driver’s seat height
adjuster is located on the outside of the seat.
Pull lever up to raise or lower seat to a comfortable
height.
1-3
ProCarManuals.com

Six-Way Power Driver Seat
If your vehicle has this feature, the control is located on
the outboard side of the driver’s seat. To adjust the
seat do any of the following:
Move the seat forward or rearward by pressing the
center switch forward or rearward.
Move the entire seat up or down by pressing the
DOWN/UP switch.
Adjust the seatback by pressing the RECLINE
switch forward or rearward.
SeeReclining Seatbacks on page 1-5, later in this
section, for more information.
Manual Lumbar
If your vehicle has this
feature, the knob is
located on the inboard
side of the driver’s
seatback.
Turn the knob forward or rearward to increase or
decrease the lumbar support.
1-4
ProCarManuals.com

Heated Seats
If your vehicle has this
feature, the thumbwheel
controls for both driver and
passenger heated seats
are located in the center of
the instrument panel.
Move the thumbwheel to the rst circle to warm the seat
to a lower temperature and to the second circle for a
higher temperature. An indicator light tells you that the
heating system is on. This feature will only work
when the ignition is on.
Reclining Seatbacks
To adjust the seatback on a manual seat, lift the lever
on the outer side of the seat and move the seatback
to where you want it. Then release the lever to lock the
seatback in place.
1-5
ProCarManuals.com

On a power driver’s seat,
adjust the seatback by
pressing the RECLINE
switch forward or rearward.
But don’t have a seatback reclined if your vehicle is
moving.
1-6
ProCarManuals.com

{CAUTION:
Sitting in a reclined position when your vehicle
is in motion can be dangerous. Even if you
buckle up, your safety belts can not do their
job when you are reclined like this.
The shoulder belt can not do its job because it
will not be against your body. Instead, it will be
in front of you. In a crash you could go into it,
receiving neck or other injuries.
The lap belt can not do its job either. In a
crash the belt could go up over your abdomen.
The belt forces would be there, not at your
pelvic bones. This could cause serious internal
injuries.
For proper protection when the vehicle is in
motion, have the seatback upright. Then sit
well back in the seat and wear your safety belt
properly.
Head Restraints
Your vehicle has adjustable head restraints on the front
seats. Slide an adjustable head restraint up or down
so that the top of the restraint is closest to the top
of your head. This position reduces the chance of neck
injury in a crash.
The adjustable head restraints tilt forward and
rearward also.
1-7
ProCarManuals.com

Rear Seats
Split Folding Rear Seat
Your vehicle is equipped with a split folding rear seat. A
split folding rear seat enables you to carry long cargo
by folding down part or all of the rear seat.
Sedan
On sedans, you can fold
either the driver’s or
passenger’s right side of
the seatback separately or
both sides together. Lift
the lever on the corner of
the seatback.
Make sure the front seat is not reclined. If it is, the rear
seatback won’t fold down all the way.If your vehicle is equipped with this feature, remove the
rear center lap-shoulder belt latch. Push the release
button up into the slot with a key to remove the
lap-shoulder belt latch.
1-8
ProCarManuals.com

{CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted will not provide
the protection needed in a crash. The person
wearing the belt could be seriously injured.
After raising the rear seatback, always check
to be sure that the safety belts are properly
routed and attached, and are not twisted.
{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.To raise the seatback up, follow these steps:
1. Raise the seatback up and make sure it latches.
Push and pull the top of the seatback to ensure
that all of the latches are secure.
2. Reconnect the center safety belt latch plate to the
buckle.
Make sure the safety belt label is pointing to the release
button, and that both the safety belt label and release
button are facing the front of the vehicle. Make sure the
belt is not twisted. Push and pull on the latch plate to
ensure the belt is secure.
1-9
ProCarManuals.com

Wagon
On wagons, you can fold either the passenger’s side of
the seatback or the entire seatback.
To fold down the
passenger’s side of the
seatback, pull the lever on
the corner of the
seatback. To lower the
entire rear seatback, pull
the lever on the corner
of the driver’s side
seatback.{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.
When the seatback is put in an upright position, be sure
the latches engage by pushing rearward with your hand
over the latch locations. Then push and pull at the top of
the seatback to ensure that all latches are secure.
1-10
ProCarManuals.com