Lightweight design.
The six-cylinder boxer engine is
a highly compact unit offering
excellent cylinder charging and
torque characteristics as well
as optimum balance and minimal
vibration. With the cylinders
arranged horizontally on either
side of the crankshaft, the
layout is key to the car’s low
centre of gravity.
The alloy crankcase consists
of two main sections, each
containing one bank of cylinders.
The crankshaft runs in eight main
bearings and is driven by forged
connecting rods. For optimum
durability, we’ve used forged
aluminium pistons running in
Nikasil-coated aluminium liners
and featuring individual oil-spray
cooling. Key benefits include lower
frictional resistance and longer
service life.
The cylinder heads are made
from a lightweight alloy which
is extremely resistant to high
temperature. Each bank of
cylinders has two overhead
camshafts driving a set of four
valves – two inlet and two exhaust
– on each individual cylinder.
The valves are arranged in a ‘V’
configuration and feature a highly
efficient dual-spring design.
Engine performance is further
enhanced with the aid of bothVariable Turbine Geometry (VTG –
see page 32) and VarioCam Plus
(variable valve timing and lift
on inlet side – see page 38). The
benefits are not only greater
power and torque, but also better
fuel economy and lower emissions.
Dry-sump lubrication.
This classic dry-sump system
with separate oil reservoir
ensures consistent oil pressures
throughout the engine. In doing
so, it compensates for even the
most extreme and prolonged
gravitational loads.
After passing through the engine,
every drop of oil is returned
directly to the external reservoir.
The flow is driven by two pairs of
scavenge pumps in the cylinder
heads and a further two pumps in
the crankcase. Gas is removed
from the returning oil by means of
a defoaming device in the
reservoir. As a result, the oil
level in the reservoir remains
virtually constant at all times.
The oil is returned to the
lubrication points in the engine
by means of a dedicated
oil-feed pump. With a further
scavenge pump in each of the
twin turbocharger units, the
new 911 Turbo has a total of nineseparate pumps to drive the
lubrication system.
The oil level can be checked from
inside the car via the standard
on-board computer. This solution
is not only cleaner and more
convenient than a conventional
dipstick, it is also significantly
more accurate.
· 30 ·· 31 ·The new 911 Turbo |
Drive
Main rotating assembly and valve gear
