SNOW SCREEN* The snow screen is installed on the lower part of the front bumper toprevent the accumulation of snow atthe radiator cooling fan. When the snow has cleared, do not forget to remove the snowscreen. FITTING Offer up the snow screen facing its centring pin Aon the front
bumper.
Put it in place by pressing ateach clip Blocated in the four
corners.
REMOVAL Pass a screwdriver into the hole located near each of the clips.
Use the screwdriver as a lever tounclip the four clips Bin turn.
* According to destination.
PRACTICAL INFORMATION
102
22-12-2003
TOWING YOUR VEHICLE
Without lifting (four wheels on the ground)
You must always use a tow bar. From the front or the rear Attach the tow bar to the towing eye. By lifting (two wheels only on the ground) It is preferable to lift the vehicle by the wheels.
Never use the radiator crossmember.
