2004 Peugeot Partner VP bulb

22-12-2003
PRACTICAL INFORMATION
102
CHANGING A BULB Front lights
1 - Dipped beam headlamps / Main beam headlamps
(H4-60/55W)
- Turn and remove the protector A.
- Disconnect the connector.
- Unclip the spring.
- Remove and replace bulb. 2 - Side lights (W 5 W)
- Turn and remove the protector
A.
- Pull the bulb holder rearwards.
- Change the bulb.
3 - Direction indicators (PY 21 W amber)
- Turn the bulb holder Ba quarter turn and remove it.
- Change the bulb. Note: in certain weather conditions (low temperatures,
humidity), the presence of condensation on the inside
of the headlamp glass is normal ; it disappears a few
minutes after the lights have been switched on.

22-12-2003
Direction indicator side repeaters
(WY 5 W amber)
- Push the transparent cover forwards or rearwards and release it.
- Turn the bulb holder a quarter turn.
- Change the bulb.
Coloured bulbs (direction indicators and side repeaters) must be repla-ced by bulbs of identical
specification and colour.
Only use H4 bulbs manu-factured by: - GE/TUNGSRAM,- PHILIPS,- OSRAM,
to avoid damaging the head- lamps. These meet the anti-UV (ultra- violet) specifications necessaryfor the correct operation and reliability of the headlamps. The headlamps are fitted with a polycarbonate lens coated with
a protective varnish. You arestrongly advised to avoid cleaningthem using a dry or abrasive clothand using detergent products orsolvents. Use a soft, damp cloth.
PRACTICAL INFORMATION 103

22-12-2003
PRACTICAL INFORMATION
104
Rear lights
1 - Fog lamp (P 21 W).
2 - Direction indicators (P 21 W).
3 - Reversing lights (P 21 W).
4 - Brake lights/Side lights
(P 21/5 W). - Open the rear door.
- Unscrew the nut
A.
- Push the light unit gently towards the interior of the vehicle to unclip the two side retaining clips.
- Remove the light unit and discon- nect it.
- Unclip the bulb holder by pressing the tabs B,
- Change the faulty bulb.
Rear lights protective grille Unscrew the wing nuts C, and
remove the protective grille.
Number plate lights (W 5 W) Unclip the translucent protector to gain access to the bulb.

Third brake light (tailgate) (W5W) With the tailgate open, unscrew the two nuts.
 Unclip the support to gain accessto the bulbs.
 Change the faulty bulb. Third brake light (rear leftdoor) (W5W) 
Remove the housing cover by pressing the tab A(round
section) at the end of the light.
 Pull the housing cover rearwards. 
Squeeze the two tabs Bto
remove the bulb holder.
 Pull the faulty bulb and change it.
To refit, proceed in the reverse order.
PRACTICAL INFORMATION 105
22-12-2003