Page 32 of 128
AUDIO RB3
YOUR PARTNER IN DETAIL
34
22-12-2003
Stalk movement
Function
1 - Press (behind) Increase volume
2 - Press (behind) Decrease volume
1 + 2 - Simultaneous press Sound cut-off (mute); restoring of the sound by pressing any button
3 - Press Automatic search of higher frequencies (radio) -
Selection of the next track (CD)
4 - Press Automatic search of lower frequencies (radio) -
Selection of the previous track (CD)
5 - Press the end Change of source (radio/cassette/CD changer)
6 - Rotation (clockwise) Selection of next station stored in memory (radio) -
Selection of next CD
7 - Rotation Selection of previous station stored in memory (radio) - Selection of previous CD
(anti-clockwise)
Page 41 of 128
YOUR PARTNER IN DETAIL
36
22-12-2003
AUDIO RD3
Stalk movement
Function
1 - Press (behind) Increase volume
2 - Press (behind) Decrease volume
1 + 2 - Simultaneous press Sound cut-off (mute); restoring of the sound by pressing any button
3 - Press Automatic search of higher frequencies (radio) -
Selection of the next track (CD)
4 - Press Automatic search of lower frequencies (radio) -
Selection of the previous track (CD)
5 - Press the end Change of source (radio/CD/CD changer)
6 - Rotation (clockwise) Selection of next station stored in memory (radio) -
Selection of following CD
7 - Rotation Selection of previous station stored in memory (radio) - Selection of previous CD
(anti-clockwise)
Page 55 of 128
22-12-2003
YOUR PARTNER IN DETAIL55
Never drive with the head restraints removed; theymust be in place and correctly adjusted.
Do not place heavy objects in thedrawers.
4- Storage drawer (version with passenger air bag)
There is a storage drawer under the front passenger seat.
To open it, lift it and pull.
5- Access to rear seats (version with one sliding side door only)
Lift the control to fold the seat backand move the seat forwards. On repositioning, the seat returns to its initial position (driver's side). 6- Heated seats switch
Press the switch. The temperature is
controlled automatically. Pressing the switch again stops operation. Note:
the command for activation of
heating of the seat(s) remains memorised for two minutes after the
ignition has been switched off.
No person or object mustprevent the seat fromreturning to its initial position; return to this
position is necessary for the seatto lock in place.
Page 56 of 128
22-12-2003
YOUR PARTNER IN DETAIL
56
REAR SEAT
To fold the rear seat:
- lower the head restraint,
- press control
1to unlock the seat back 2,
- fold the seat back 2onto the seat,
- place the seat in the "folded" position. When repositioning:
- tilt the folded seat rearwards,
- lift the seat back,
- check that the seat is locked correctly.
Take care not to trap the seat belts.
Page 58 of 128
22-12-2003
YOUR PARTNER IN DETAIL
58
"ISOFIX" MOUNTINGS The rear right side seat and the rear centre seat of your vehicle are fittedwith ISOFIX mountings . These are
two rings located between the seatback and the seat cushion. The ISOFIX child seats are fitted
with two locks which are secured easily on these rings. The incorrect installation of a child seat in a vehicle compromises thechild's protection in the event of acollision. This ISOFIX mounting system gua- rantees safe, reliable and fast instal-lation of the child seat in yourvehicle. The special approved child seat is
the Isofix KIDDY seat. It can be fittedin the "rear facing" position frombirth to 13 kg and "forwards facing"from 9 to 18 kg. In the "forwards facing" position, the combined use of the Isofix moun-tings, the restraining cushion and
the seat belt is compulsory. In the "rear facing" position, use both the Isofix mountings and thechild seat harness. In both cases, it is essential to adjust the
front seat to the intermediate
longitudinal position, seat backupright .
On the rear centre seat, the "for-wards facing" position only ispermitted. This seat can also be used on seatsnot fitted with ISOFIX mountings. Inthis case, it is compulsory to attachit to the vehicle's seat by means ofthe three-point seat belt.
When the Isofix KIDDY seat is fit- ted in the "rear facing" positionon the front passenger seat, it isessential to disarm the passengerair bag. The child would risk being killed or seriously injured if the air bagwere to inflate. Follow the instructions for fitting the child seat in the manufactu-rer's instruction booklet.
Page 60 of 128
22-12-2003
YOUR PARTNER IN DETAIL
60
Never leave one or more children alone and unsu-pervised in a vehicle. Never leave a child or an
animal in a vehicle which is expo- sed to the sun and has the win-dows closed.
To protect your young children from the sun, fit blinds on the rearwindows. Never leave the keys within reach of children inside the vehicle. Observe strictly the recommenda- tions for assembling and securingthe child seat as shown in thechild seat instructions.
To prevent the doors from opening
accidentally, use the child lock*. Also, do not open the rear win- dows more than a third*.
* According to model.
Groups 2 and 3: from 15 to 36 kg
L4 - "Recaro Start'': installed in the rear using a three-point seat belt.
The height and width at the shoulders and length of the seat cushion must be adjusted according to the age and build of your child.
L5 - "Klippan Optima": installed in the rear using a three-point seat belt. From the age of 6 years (approximately 22 kg), the booster is used on itsown.
Groups 1, 2 and 3: from 9 to 36 kg
L6 - "Kiddy Life": installed in the rear using a three-point seat belt. The height and width at the shoulders and the length of the seat cushion must be adjusted according to the age and build of your child.
For the safety of young children (from 9 to 18 kg), PEUGEOT recommends use of the restraining cushion.
Disarm the passenger air bag when installing a "rearwards facing" child seat on the front passenger seat. Otherwise, the child would risk beingkilled or seriously injured were the air bag to inflate.
Page 62 of 128
22-12-2003
YOUR PARTNER IN DETAIL
62
SEAT BELTS Seat belt height adjustment:
To lower or raise: slide the control downwards or upwards. Locking the seat belts Pull the strap, then insert the end into the buckle. Front seat belts with pre- tensioner Safety in the event of frontal impacts has been improved by the introduc-tion of pre-tensioning seat belts forthe front seats. Depending on the seriousness of the impact, the pre-tensioning system instantly tightens the seatbelts and pulls them against thebodies of the occupants. The pre-tensioning seat belts are armed when the ignition is on. Rear seat belts The rear seats are fitted with three three-point inertia reel seat belts(two-part rear seat, 1/3 - 2/3).
To be effective, a seat belt must be tightened asclose to the body as possible.
Depending on the nature andseriousness of the impact, thepre-tensioning system may betriggered before and indepen-dently of the air bags. In all cases, the air bag warning light on the instrument panelcomes on. Following a collision, have the system checked by a PEUGEOT
dealer.
Page 63 of 128
YOUR PARTNER IN DETAIL63
THE KEYS The keys allow you to switch on the ignition and operate the passengerair bag disarming switch as well as toindependently operate the locks onthe doors and the fuel filler cap. Central locking From the front doors, the keys allow you to lock and unlock the doors andtailgate. If one of the doors or the tailgate is open, the central locking does notwork. The remote control performs the same functions at a distance.The remote control Locking Press button
Ato lock the vehicle.
This is confirmed by fixed lighting of the direction indicators for approxi-mately two seconds. Unlocking Press button Bto unlock the vehicle.
This is confirmed by rapid flashing of the direction indicators. Note: if the vehicle is locked and
unlocking is activated inadvertently, unless the doors are opened within30 seconds, the vehicle will lock
automatically. Locating your vehicle
To locate your vehicle, if you have locked it, in a car park: press button A, the courtesy
lights come on and the direction indicators flash for a fewseconds.
Changing the battery of the remote control The information "battery flat" is given by an audible signal accompanied by the message "Remote control
battery flat" on the screen.
To change the battery, unclip thecasing using a coin at the ring (CR 2016/3 volt battery). If the remote control does not work after the battery has been changed,re-programme the remote control. Programming the remote control Switch off the ignition.
Switch the ignition on again.
Press button Aimmediately for a
few seconds.
Switch off the ignition and remo- ve the remote control key from
the ignition lock. The remotecontrol is now working again.
22-12-2003
