Inspection
SPEAKER
1. Disconnect speaker harness connector.
2. Measure the resistance between speaker terminalsq
1andq2.
I The resistance should be2-4 W.
3. Using jumper wires, momentarily connect a 9V battery between speaker terminals q
1andq2.
I A momentary hum or pop should be heard.
ANTENNA
Using a jumper wire, clip an auxiliary ground between antenna and body.
IIf reception improves, check antenna ground (at body surface).
I If reception does not improve, check main feeder cable for short circuit or open circuit.
RADIO
All voltage inspections are made with:
IIgnition switch ON or ACC
I Radio ON
I Radio connected (If removed for inspection, supply a ground to the case using a jumper wire.)
AUDIO
EL-149
http://vnx.su/
