2004 NISSAN PATROL wiring diagram

DIAGNOSTIC PROCEDURE (MODELS WITH TB45
ENGINE)
SYMPTOM: Magnet clutch does not engage when A/C switch
and fan control dial are ON.
CHECK POWER SUPPLY FOR COM-
PRESSOR.
Disconnect compressor harness connector.
Do approx. 12 volts exist between compres-
sor harness connector terminal No.j
1and
ground?
No
cYe s
Check magnet clutch coil.
NG
Replace magnet clutch.
Refer to HA-178 in Y61
SERVICE MANUAL, publi-
cation No. SM7E-2Y61G1.
Disconnect A/C relay.
Note
CHECK CIRCUIT CONTINUITY
BETWEEN A/C RELAY HARNESS CON-
NECTOR TERMINAL NO.j
3AND COM-
PRESSOR HARNESS CONNECTOR TER-
MINAL NO.j
1.
Continuity should exist.
If OK, check harness for short.
OK
CHECK POWER SUPPLY FOR A/C
RELAY.
Disconnect A/C relay.
Do approx. 12 volts exist between A/C
relay harness connector terminal Nos.j
1,
j5and ground?
Ye s
cNo
Check power supply circuit
and 10A or 20A (No.
)
located in the fuse block
(J/B).
Refer to EL section (ªWiring
Diagramº, ªPOWER SUP-
PLY ROUTINGº).
CHECK A/C RELAY AFTER DISCON-
NECTING IT.
Refer to HA-22 in Y61 SERVICE MANUAL,
publication No. SM1E-Y61EG1.
OK
cNG
Replace A/C relay.
jA(Go to next page.)
Note:
If the result is NG or No after checking circuit continuity, repair harness or
connector.
RHA388I
RHA096GG
SHA580FA
SHA581F
.
.
.
.
.
.
TROUBLE DIAGNOSESAUTO
Magnet Clutch (Cont'd)
HA-4043

DIAGNOSTIC PROCEDURE (MODELS WITH ZD
ENGINE)
SYMPTOM: Magnet clutch does not engage when A/C switch
and fan control dial are ON.
CHECK POWER SUPPLY FOR COM-
PRESSOR.
Disconnect compressor harness connector.
Do approx. 12 volts exist between compres-
sor harness connector terminal No.j
1and
ground?
No
cYe s
Check magnet clutch coil.
NG
Replace magnet clutch.
Refer to HA-178 in Y61
SERVICE MANUAL, publi-
cation No. SM7E-2Y61G1.
Disconnect A/C relay.
Note
CHECK CIRCUIT CONTINUITY
BETWEEN A/C RELAY HARNESS CON-
NECTOR TERMINAL NO.j
7AND COM-
PRESSOR HARNESS CONNECTOR TER-
MINAL NO.j
1.
Continuity should exist.
If OK, check harness for short.
OK
CHECK POWER SUPPLY FOR A/C
RELAY.
Disconnect A/C relay.
Do approx. 12 volts exist between A/C
relay harness connector terminal Nos.j
1,
j6and ground?
Ye s
cNo
Check power supply circuit
and 10A or 20A (No.
)
located in the fuse block
(J/B).
Refer to EL section (ªWiring
Diagramº, ªPOWER SUP-
PLY ROUTINGº).
CHECK A/C RELAY AFTER DISCON-
NECTING IT.
Refer to HA-119 in Y61 SERVICE
MANUAL, publication No. SM7E-2Y61G1.
OK
cNG
Replace A/C relay.
jA(Go to next page.)
Note:
If the result is NG or No after checking circuit continuity, repair harness or
connector.
RHA399I
SHA579F
RHA653GA
RHA654G
.
.
.
.
.
.
TROUBLE DIAGNOSESAUTO
Magnet Clutch (Cont'd)
HA-4049

Wiring Diagram Ð R/COOL Ð/LHD Models with
Front Auto A/C
THA206M
TROUBLE DIAGNOSESREAR COOLER
HA-4055

THA207M
TROUBLE DIAGNOSESREAR COOLER
Wiring Diagram Ð R/COOL Ð/LHD Models with
Front Auto A/C (Cont'd)
HA-4056

Wiring Diagram Ð R/COOL Ð/LHD Models with
Front Manual A/C Except for TB45E Engine
THA208M
TROUBLE DIAGNOSESREAR COOLER
HA-4057

THA209M
TROUBLE DIAGNOSESREAR COOLER
Wiring Diagram Ð R/COOL Ð/LHD Models with
Front Manual A/C Except for TB45E Engine
(Cont'd)
HA-4058

Wiring Diagram Ð R/COOL Ð/LHD Models with
Front Manual A/C for TB45E Engine
THA210M
TROUBLE DIAGNOSESREAR COOLER
HA-4059

THA211M
TROUBLE DIAGNOSESREAR COOLER
Wiring Diagram Ð R/COOL Ð/LHD Models with
Front Manual A/C for TB45E Engine (Cont'd)
HA-4060