2004 MITSUBISHI ENDEAVOR sunroof jam

The sunroof should be initialized when any of the following components are
replaced, the sunroof position is miss timed, the sunroof is in learn mode.
Roof lid glass assembly Sunroof motor Sunroof-ECU
1. Ensure the components are correctly assembled. Ensure all the connectors are
connected securely.
2. If the sunroof is already in learn mode, go to step 3. If the sunroof is not in
learn mode, enter learn mode by i or ii.
i. Disconnect the sunroof-ECU connector while the sunroof is operating.
ii. Activate the jam preventing mechanism five times continuously.
3. Press the sunroof Close switch repeatedly until the sunroof is tilted up fully.
4. Press and hold the sunroof Close switch for at least three seconds.
5. Press the sunroof Close switch until the sunroof closes fully.
6. Press the sunroof Open switch until the sunroof opens fully. Then press the
sunroof Close switch until the sunroof closes fully. The sunroof should work
normally.
OPERATION CHECK Check that the following items. If faulty, replace the sunroof-ECU.
1.Installation condition of the sunroof assembly
2.Installation condition, deformation and contamination of the sunroof drive
cable NOTE: Do not stop the sunroof before it reaches the fully open or
fully closed position during operations in steps 5 and 6
above. If the sunroof has stopped accidentally, repeat the
procedure from step 1 .
CAUTION: Check that the following items are normal before
carrying out this operation check.
2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Sunroof Assembly - Endeavor

JAM PREVENTING MECHANISM JAM PREVENTING MECHANISM
C
sunroof switch to the
CLOSE/TILT-
DOWN position
more than two
seconds while the
sunroof is
automatically
opening)
operation, and the
sunroof closes while the
sunroof switch is pushed
to the CLOSE/TILT-
DOWN position.
06
AUTOMATIC
OPERATION
INTERRUPTION
(TILT-UP)
1. Ignition switch: ON
2. Sunroof switch: OPEN
or TILT-UP,
CLOSE/TILT DOWN
The sunroof stops the
automatic opening
operation.
NO.
SUNROOF
FUNCTION
REQUIREMENTS FOR
THE SUNROOF TO
FUNCTION
NORMAL
OPERATION
01
CLOSE
1. Ignition switch: ON
2. Sunroof switch:
CLOSE/TILT-DOWN
3. Sunroof initial position:
being closed or opened
4. If there is an object in the
sunroof opening, interrupt
the sunroof operation
before the sunroof is fully
closed.
After the sunroo
f
operation is interrupted, it
opens to the
predetermined distance
and then stops
automatically.
02
TILT-DOWN
1. Ignition switch: ON
2. Sunroof switch:
CLOSE/TILT-DOWN
3. Sunroof initial position:
bein
g tiltin
g down
The sunroof tilts up
automaticall
y after it is

2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Sunroof Assembly - Endeavor

SUNROOF TIMER MECHANISM In cases except the following, the basic operation and jam preventing mechanism
will be maintained for thirty seconds after the ignition switch is turned to the LOCK
(OFF) position. (Sunroof timer function)
If you open a door within that period (i.e. a door switch is on), the sunroof
timer function will be cancelled immediately. If you turn the ignition switch to the LOCK (OFF) position while the timer is
working, the sunroof will continue moving until it close fully, regardless of the
time-out period.
SUNROOF ASSEMBLY REMOVAL AND INSTALLATION
4. Interrupt the sunroof
operation before the
sunroof is fully close.
interrupted.

2004 Mitsubishi Endeavor LS
2004 BODY & ACCESSORIES Sunroof Assembly - Endeavor