2004 MERCEDES-BENZ M-Class Comand Manual

86 Telephone*Telephone* operation1 Observe all legal requirements
The following functions are available for
placing an outgoing call:
Dialing a telephone number
(page 86)

Dialing a number from the phone book
(page 88)

Redial (
page 90)

Speed-dialing (
page 90)

Emergency call (
page 92)Dialing a telephone number
Entering a telephone number

Press .
The main telephone menu appears.
Warning
G
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a ve-
hicle. Whether or not prohibited by law, for
safety reasons, the driver should not use the
cellular telephone while the vehicle is in mo-
tion. Stop the vehicle in a safe location be-
fore answering or placing a call. If you
nonetheless choose to use the cellular
phone while driving, please be sure to pay
attention to the traffic situation at all times.
Use the cellular phone
1 only when road,
weather and traffic conditions permit.
Outgoing call

87 Telephone*
Telephone* operation

Use the number keys through
to enter the telephone number.
The menu changes when the first digit
is entered.
Correcting input
To correct only the last digit

Press briefly.
To clear all digits

Press longer than 2 seconds.Begin dialing

If you have entered the correct num-
ber, press .
Dialing begins. If the phone number
and name are stored in the phone
book, the name appears on the screen.
The active audio source switches to
mute.
Interrupt dialing

Press .Conducting a call
The call time appears when the call is initi-
ated.
Ending the call:

Press .

88 Telephone*Telephone* operationSubsequent dialing
Transmitting other DMTF tones
During a call, press the number keys
through , or .
The number dialed appears in the menu
for 10 seconds after the last key is
pressed (subsequent dialing display).Dialing a number from the phone book
The phone book can be accessed using
either the softkey NAME or the NUM.
The softkey NAME starts the alpha-
betic scrolling mode and the softkey
NUM starts the numeric scrolling mode.
If there are no numbers located in the
memory, PHONE BOOK MEMORY EMP-
TY appears on the display.Opening the alphabetic scrolling mode

Make sure the main telephone menu is
displayed.

Press the softkey NAME.
or

Enter up to 2 letters with the number
keys through (e.g.: ).

To correct the last digit, press .
iYou can only use the cellular telephone
to save numbers and names in the tele-
phone book. See your telephone Opera-
tor’s Manual.

89 Telephone*
Telephone* operation

By pushing the joystick up or down, you
can select the desired name.
The selected name is highlighted.
or

By pushing the joystick to the left or
the right, you can jump to the next or
previous page of the list.
Begin dialing:

If you have found the right name, press
.
Ending the call:

Press .Opening the numeric scrolling mode

Make sure the main telephone menu is
displayed.

Press the softkey NUM.
or

Enter up to 2 letters with the number
keys through (e.g.: ).

To correct the last digit, press .

By pushing the joystick up or down, you
can select the desired number.
The selected number is highlighted.
or

By pushing the joystick to the left or
the right, you can jump to the next or
previous page of the list.
Begin dialing:

If you have found the right number,
press .
Ending the call:

Press .

90 Telephone*Telephone* operationRedial
You can redial the last 10 numbers dialed.
Make sure the main telephone menu is
displayed.

Press .
The number list appears on the display.

By pushing the joystick up or down, you
can select the desired number.
The selected number is highlighted.or

By pushing the joystick to the left or
the right, you can jump to the next or
previous five numbers in the list.
Begin dialing:

If you have found the right number,
press .
Ending the call:

Press .Speed-dialing

Make sure the main telephone menu is
displayed.

Enter the memory location number us-
ing the number keys through
.
You can enter up to 2 digits.
iIf there is no entry in the numbers list,
the message LAST NUMBERS MEMO-
RY EMPTY appears in the telephone
menu.
Warning
G
If you enter“1” and confirm this memory lo-
cation as described in “Begin dialing”, the
default emergency number 9-1-1 is dialed.
The 9-1-1 emergency call system is a public
service. Using it without due cause is a crim-
inal offense.

91 Telephone*
Telephone* operation
Begin dialing:
If you have found the right number,
press .
Ending the call:

Press .Quick-dialing for the first 10 memory
locations

Make sure the main telephone menu is
displayed.

Press one of the number keys to
longer than 2 seconds.
The phone number or name appears in
the menu. The telephone dials the
phone number stored in this memory
location.
The call time appears when the call is
initiated.Ending the call:

Press .Warning
G
If you press , the emergency number
9-1-1 (default input) is dialed.
The 9-1-1 emergency call system is a public
service. Using it without due cause is a crim-
inal offense.

92 Telephone*Emergency callYou can use a mobile communications net-
work to make an emergency call to an
emergency rescue station.
The emergency call is placed as long as the
corresponding mobile communication net-
work is available. To place an emergency
call, switch the telephone on.
Emergency calls may not be possible with
all mobile phone networks, or if certain
network services and/or telephone func-
tions are active. Check with your local net-
work operating company.Initiating an emergency call

Make sure that the main telephone
menu is displayed.

Press the number key longer
than 2 seconds (quick-dialing).
The telephone begins dialing.
The call time appears when the call is
initiated.
Ending or stopping an emergency call

Press .
iThe emergency call is also placed if the
phone is locked.iThis function places a call to a local 9-1-
1 provider. This function does not ini-
tiate a Tele Aid call.
Warning
G
The 9-1-1 emergency call system is a public
service. Using it without due cause is a crim-
inal offense.!If you press the number key long-
er than 2 seconds, the number stored
in memory location “1” (default is 9-1-
1) is dialed.!It is not possible to complete the emer-
gency call if the cellular system is busy.
The message SYSTEM BUSY appears.
Take appropriate measures to alert an
emergency service as soon as possible.

93 Navigation*
Important notes
Quick reference
Destination input
Route guidance
Destination memory
Settings