2004 MERCEDES-BENZ E-Class AUX

Contents
Introduction . . . . . . . . . . . . . . . . . . . . . 7
Where to find it . . . . . . . . . . . . . . . . . . . 7
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating safety. . . . . . . . . . . . . . . . . . . 9At a glance . . . . . . . . . . . . . . . . . . . . . 11
Radio operating elements . . . . . . . . . . 12
Single CD operating elements . . . . . . . 14
CD changer* operating elements. . . . . 16
Telephone operating elements . . . . . . 18
Navigation operating elements . . . . . . 20
Multifunction steering wheel . . . . . . . . 22
Selecting the multifunction display 23
Menu system . . . . . . . . . . . . . . . . . . . . 25
Quick reference COMAND . . . . . . . . . . 28
Switching ON/OFF . . . . . . . . . . . . . 28
Volume . . . . . . . . . . . . . . . . . . . . . . 28
Balance and fader. . . . . . . . . . . . . . 29
Bass and treble . . . . . . . . . . . . . . . 30
Sound functions* . . . . . . . . . . . . . . 31
Audio. . . . . . . . . . . . . . . . . . . . . . . . . . 33
Audio main menu . . . . . . . . . . . . . . . . . 34
Opening the Audio main menu . . . . 34
Selectable soft keys . . . . . . . . . . . . 34
Mute function . . . . . . . . . . . . . . . . . 34
Radio operation . . . . . . . . . . . . . . . . . . 35
Switching to radio mode . . . . . . . . . 35
Switching wavebands . . . . . . . . . . 35
Tuning to a FM / AM station . . . . . 36
Tuning to a station on
Weather Band . . . . . . . . . . . . . . . . . 39
Storing stations . . . . . . . . . . . . . . . 40
Single CD operation . . . . . . . . . . . . . . . 42
General information . . . . . . . . . . . . 42
Tips on caring for your CDs . . . . . . 42
Switching to Single CD mode . . . . . 43
Loading a CD . . . . . . . . . . . . . . . . . 43
Ejecting a CD . . . . . . . . . . . . . . . . . 44
Single CD main menu . . . . . . . . . . . 44
Selecting a track . . . . . . . . . . . . . . 45
Fast forward/reverse . . . . . . . . . . 46
Playback options . . . . . . . . . . . . . . 47CD changer* operation . . . . . . . . . . . . 48
General information . . . . . . . . . . . . 48
Tips on caring for your CDs . . . . . . 48
Switching to CD changer* mode . . 49
Accessing the CD changer* . . . . . . 49
Retracting the CD changer* . . . . . 49
Loading CDs . . . . . . . . . . . . . . . . . . 49
Ejecting CDs . . . . . . . . . . . . . . . . . 53
CD changer* main menu . . . . . . . . 54
Selecting CDs . . . . . . . . . . . . . . . . . 55
Selecting a track . . . . . . . . . . . . . . 56
Fast forward/reverse . . . . . . . . . . . 58
Playback options. . . . . . . . . . . . . . . 58
Audio AUX operation . . . . . . . . . . . . . . 60

25 At a glance
Menu system

Menu system
The menu system allows for easy opera-
tion of COMAND.
Each of the following main functions has a
main menu: 
Audio
(Radio, Single CD, CD changer* and
AUX mode)

Satellite radio*

Navigation*

Telephone*

Service
Opening main menus

Audio (
page 34):
Press
.

Satellite radio* (
page 61):
Press .

Navigation* (
page 98):
Press .

Telephone* (
page 77):
Press .

Service (
page 141):
Press .
Menu display
A display can be composed of 3 sections.
Example: Radio main menu
1Soft key sections
2Main area
3Status barThe functions currently assigned to the
soft keys are displayed in the soft key sec-
tions 1.
Messages or settings are displayed in the
main area 2.
The settings can be changed by operating
controls accordingly.
The status bar 3 is divided into three ar-
eas.
Left side:
The selected operating mode is given. In
this example: Radio
iA maximum of five soft keys may be
displayed on each side of the main area
2.

28 At a glanceQuick reference COMANDSwitching ON 
Turn the key in the steering lock to po-
sition 1 or 2,
or

Press .
COMAND switches on the last active
system and displays the corresponding
menu.
Switching OFF

Turn the key in the steering lock to po-
sition 0 and remove it,
or

Press .Different volume settings are possible for
navigation*, telephone*, or Voice con-
trol*.
A common volume setting is provided for
Radio, Single CD, CD changer*, AUX and
Satellite radio* operating modes.
When setting the volume, the system auto-
matically stores the setting for the current-
ly active operating mode. The volume of
navigation announcements can be
changed only during an actual announce-
ment.
iThe system can be operated as follows:
from COMAND itself, or

from the multifunction steering
wheel
This operating manual describes oper-
ation from COMAND and from the mul-
tifunction steering wheel.
Unless otherwise specified, the de-
scriptions and the displays illustrated
relate to the COMAND control unit.
Switching ON/OFF
iWithout the key in position 1 or 2 of the
steering lock, the system automatically
switches OFF again after approx. 30
minutes of inactivity.
iIf a telephone call is in progress (hands-
free) you cannot switch the COMAND
OFF, is disabled.Volume

29 At a glance
Quick reference COMAND
Setting the volume 
Turn the rotary control
located on
the COMAND control unit,
or

Pressæ or ç on the multifunc-
tion steering wheel
The volume changes up or down, de-
pending on the direction of rotation or
which button was pressed.The system stores the volume settings
when the device is switched OFF.
After switching the system back on again,
the volume may be lower than at the time
when the system was switched off.
This could be the case if
the system was switched off for more
than 15 minutes, and

the volume had been set to a value in a
certain range at the time the device
was switched OFF.
Automatic volume control
The automatic volume control adjusts the
volume depending on

the vehicle’s speed (only in vehicles
without Sound-system*),
or on
the interior ambient noises of the vehi-
cle (only in vehicles with Sound-sys-
tem*)

other parameters (e.g. windows open
or closed)A common balance and fader setting ap-
plies to the following operating modes:

Radio

Single CD

CD changer*

AUX

Satellite radio*
When adjusting the balance or the fader,
the system automatically stores the set-
ting for the currently active operating
mode.Balance and faderiFor navigation* a different balance/
fader setting is possible. You find the
description under “Adjusting the
acoustics for navigation announce-
ments” (
page 99).

30 At a glanceQuick reference COMANDSetting balance/fader
Open the main menu of the appropriate
operating mode (
page 25).

Press the Bal/Fad soft key.
The Balance/Fader menu is displayed.
Now you can set the balance and the
fader (
page 30).
A cross-hair cursor appears. The verti-
cal line indicates the balance setting.
The horizontal line indicates the fader
setting.

Press or :
The cursor moves horizontally, adjust-
ing the desired balance,
or

Press or :
The cursor moves vertically, adjusting
the fader.
Storing new settings:

Press or the Back soft key,
or

wait until the display changes.For the following operating modes, differ-
ent settings for bass and treble can be se-
lected:

Radio (FM waveband)

Radio (AM waveband)

Radio (Weather Band)

Single CD

CD changer*

AUX

Satellite radio*

Navigation*
Bass and treble settings for navigation an-
nouncements are found under “Adjusting
the acoustics for navigation announce-
ments” (
page 99).
When adjusting bass or treble, the system
automatically stores the setting for the
currently active operating mode.
i Using  and , the cursor can be
moved simultaneously in vertical and
horizontal direction (diagonally).
Bass and treble

31 At a glance
Quick reference COMAND
Setting bass and treble
Open the main menu of the appropriate
operating mode (
page 25).

Press the Bass or Treble soft key.
The Bass or Treble menu appears.
Storing new settings:

Press or the Back soft key,
or

wait until the display changes.If the vehicle is equipped with a sound sys-
tem*, the sound functions are available for
the following operating modes:

Radio

Single CD

CD changer*

AUX

Satellite radio*
Different sound functions* can be activat-
ed for each one of the operating modes
listed above.
Example:
For CD mode: the LOGIC7 Surround func-
tion,
for Satellite radio* mode: the Speech
function.The following sound functions are avail-
able:

Default Settings:
Resets the sound functions* to the fac-
tory setting.

Standard:
Normal stereo playback.

Speech:
Playback optimized for speech compre-
hension.

LOGIC7 Surround:
7-channel-surround playback (not for
mono-sources like AM waveband or
Weather Band in radio mode).
Switching sound functions* ON

Open the main menu of the appropriate
operating mode (
page 25).

Press the Sound soft key.
Sound functions*


33
Audio main menu
Radio operation
Single CD operation
CD changer* operation
Audio AUX operation
Audio

34 AudioAudio main menu
Press
.
The Audio main menu appears.
If one of the Audio submenus ap-
pears, press the Back soft key as
often as necessary until the Audio
main menu appears,
or

Press
again.Various audio sources can be selected in
the Audio main menu.

Radio soft key
Station settings for WB, FM, and AM
wavebands appear (
page 35)

CD softkey
The Single CD main menu appears
(page 44)

CDC softkey
The CD changer* main menu appears
(page 54)

AUX soft key
Facilitates operation of an external au-
dio source (
page 60)Switching the mute function ON:

Press .
The system is switched to mute.
Switching the mute function OFF:

Press again,
or

Turn the rotary control located on
the COMAND control unit,
or

Pressæ or ç on the multifunc-
tion steering wheel.
The audio source heard is the one se-
lected before the mute function was
activated.
Opening the Audio main menu
Selectable soft keysiThe Satellite Radio menu is accessed
by pressing (
page 61).
Mute functioniThe mute function is still activated if
the system is switched off and then on
again.