2004 MERCEDES-BENZ CLK COUPE phone

134 Controls in detail
Operating systemAccepting a call
You may
accept a call at anytime provided
your telephone is ready to receive calls.
You will see the following message inthe
display:
Audio system dis play
COM AND* system display 6
Press the íbutton.
You have accepted the call. You will
see the call duration in the dis play.
i If you do not wish to acc ept the call, press
the ì button. Endin
g a call
6 Press the ìbutton.
You have finished the call. The display
now show sthe operational readiness
symbol again.
Dialling a number from the telephone book
You may select and dial a number from the
telephone book at any time provided your
telephone is ready to receive calls.
6
Press the ÿorè button repea t-
edly until you see theTELmenu with
the operat ional readiness symbol in the
display.
6 Press the jork button. The operating system reads the tele-
phone book stored on the SIM card or
in the telephone. This could take up to
30 seconds. If there is:
! an audio system instal led, the
PROCESSINGmes sage appe arsin
the display
! a COMAND* system installed, the
PLEASE WAITmessage appears in
the display
6 Press the jork button repea t-
edl yuntil the name you are looki ng for
appears in the display.
The stored names are displayed alpha-
betically from A to Z, or Z to A.
Example of COMAND* system display 1 Name from the telephone book
2 Memory preset number
P54.30-5236-31 P54.30-5237-31
P54.30-5245-31209en_d2.boo Seite
134 Dienstag, 25. Mai 2004 7:26 19

135
Controls in detail
Operating system i
Ifyou press the jork button for
mo rethan one sec ond,the op erating syst em
scrolls through the names rapidly. Releasing the
button stops the rapid scroll.
If you do not wish to make a call, press the ì
button.
6 Press the íbutton.
The operating system dials the appro-
priate telephone number. If ther eis:
! an audio system installed, theDIALINGmessage appears in the
display
! a COMAND* system installed, the
CONNECTING CALLmessage appears
in the display If a connection is mad
e,you will see the
name of the person you are calling and the
call duration in the display.
Example ofaudio system display
If no connection is made, the operating
system stores the dialled number in the
red ialmemor y. Red
ialling
The operating system sto res the last tele-
phone numbers whi chwere dialled. This
means that you do not have to search
through the entire telephone book.
6 Pres s the ÿ orè button repeat-
edly until you see the
TELmenu with
the operational readiness symbol in the
display.
6 Press the íbutton.
You will see the first number in the
redial memory in the display.
Ex am ple of COM AND* system display
1 Number or name store din the redial
mem ory
2 Memo ry preset number
P54.30-5238-31 P54.30-5246-31
==209en_d2.boo Seite
135 Dienstag, 25. Mai 2004 7:26 19

136 Controls in detail
Operating system
6
Press the jork button repeat-
edly until the number you are looking
for is shown inthe display.
i Ifyou do not wish to make a call, press
the ì button.
6 Press the íbutton.
Th e operating system dials the appro-
pri ate telephone number.
If a connection ismade, you will see the
call dur ationa nd:
! the name in the display, if it is stored in
the telephone book
or
! the number of the person you are call-
ing Memory
preset number
The last numbers dialled are always
stored. The numbe rofst ored numbers
depends on the type of telephone you are
using.
Most recently dial led numbe r:
! Audio system displ ay:L1
! COMAND* system display:
LO
Numbers dialled previously:
!Audio system disp lay:
L2toLn
! COMAND* system display:
L1toLn 209en_d2.boo Seite
136 Dienstag, 25. Mai 2004 7:26 19

226 Controls in detail
Features
Stowage compartments
beneath the armrest
Vehicles without a telephone* in the cen-
tre console
1 To open the stowage tray
2 To open the stowage compartm ent
3 To unlock
4 To lock
You can lock or unlock the stowage com-
partments using the emergency key ele-
ment. Opening the sto
wagetray
6 Pull handle 1.
Closing the sto wagetray
6 Press the armrest dow nuntil it
engages.
Op eningthe stowage compartme nt
6 Pull handle 2.
Closing the sto wagecompartment
6 Press the armrest dow nuntil it
engages.
Locking the stowage compartm ents
6 Turn the lock with the emergency key
element (
=pa ge 341) to position 4.
Unlocking the stowage compartm ents
6 Turn the lock with the emergency key
element (
=pa ge 341) to position 3. Sto
wage compartments beneath the armrest
Vehicles with a telephone* in the centre
console
1 To open the stowage compartment
2 To open the telephone compartment
from the left
3 To open the telephone compartment
from the right
4 To unlock
5 To lock
You can lock or unlock the stowage com-
partments using the emergency key ele-
ment. P 68.00-2911-31 neu P 68.00-2914-31 neu209en_d2.boo Seite
226 Dienstag, 25. Mai 2004 7:26 19

227
Controls in detail
Features i
Vehicle swith a permanently-installed tele-
phone:
Do not insert cards with magneti cstrips into the
card compartme ntinthes towage compartme nt
cover. The information on the strips could be
erased by the magnets in the telephone holder.
Open ingt he stowage compartment
6 Pull han dle 1 .
Clo singthe stow age compartme nt
6 Press the armrest down until it
engages.
Open ing the teleph one compartment
6 Press button 2or3.
Closing the telephone compartment 6 Press the armrest down until it
engages.
Locking the stowage compartments 6 Turn the lock with the emergency key
element (=
page 341) to position 5.Unlocki
ngthe stow age compartme nts
6 Turn the lock with the emergency key
element (
=page 341) to position 4.
Sto wage tray in the sto wage com part-
ment
Vehicles without a rear blower*
1 Stowage tray
i You can remove the sto wage tray com-
pletely to empt yor clean it. Opening
6
Pull out the stowage tray.
Clo sing
6 Slide the stowage tray in until it
engages. Adjusting the armrest angle
Ve
hicle without a telephone* in the centre
conso le
1 To lower the armrest P 68.00-3572-31 neu
P 68.00-3067-31 neu209en_d2.boo Seite
227 Dienstag, 25. Mai 2004 7:26 19

232 Controls in detail
Features
iVario us mo bile phone models have specific
telephon ebracket sthat may be installed in your
ve hicle .These telephone brackets can be
obtained ata qualified specialist workshop, e.g.
at a Mercedes-Benz Service Centre.
The functions and servic esavailable toyou when
making a call differ depending on your mob ile
phone model and your ser vice provider.
The telephone bracket for the mobile
phone is in the armrest.
6 To open the telephone compartment
(=
page 227). Inse
rtin g the mobile phone inthe tele
phonebr acket
If you insert the mobile phone into the tel-
ephone bracket, you can only speak to the
person you are calling using the hands-free
system.
! Do not attempt toremove the mobile phone
together wit hthe te lephone bracket. You could
otherwis edamage the telephone bracket.
6 Remove the round cover on the rear of
the mobile phone and keep itin a safe
place. Mobile phone*
G
Risk of accident Only use the telephone
when road and traf-
fic conditions permit. If you are not using the
hands-free system, pull over in a suitable
are ato ma kea call.
Mobile phones used inside the vehicle could
interfere with the vehicle's electronics and
thereby impair the correct operation of the
veh icle and your own safety if the phone is
used:
! without an exterior aerial
! without an exterior aerial whi chhas
be en fitted in such a way as to be reflec-
tion-free
! with an incorrectly fitted exterior aerial
The excessive levels of electromagnetic
radiation could also be damaging to your
health and the health of others. For thi
sreason, only have the exterior aerial
fitted at a qualified specialist workshop
which has the necessary specialist knowl-
edge and tools to carry out th ework
required. Mercedes-Benz recom mends that
you use a Mercedes-Benz Service Centre for
this purpose. In particular, work relevant to
safety or on safety-related systems must be
carried out at a qualified specialist work-
shop. 209en_d2.boo Seite
232 Dienstag, 25. Mai 2004 7:26 19

233
Controls in detail
Features
Example 1 To engage the mobile phone
2 Lugs
3 Telephone bracket
6 Slide the bottom of the mobile phone
into lugs 2 in telephone bracket 3.
6 Press the mobile phone in the direction
of arrow 1unti lit engages in tele-
phone bracket 3.
The mobile phone is connected to the
hands-free system and the multi-func-
tion steering wheel. The battery
isch arged, depen ding on
it s charge status and the position of the
key inthe ignition. The charging proc-
ess is indicated on the mobile phone
display.
i The vehicle reads the telephone books
st ore d on theSIM card and inthem obile phone
me mory. If the same entr y is stored in both tele-
phone books, both entri eswill be displayed in
th e multi-function display.
You can make a call using the sand
t buttons on the multi-function steer-
ing wheel. You can control other functions
of the mobile phone using the operat ing
system ( =page 133).
i When you remove the key from the ignition
lo ck, the mobile phone remains switched onfor
ap proxi mately ten minut es(run-on time). If you
ma ke a call during thi stime, the mobilep hone
wi llbe switched off approximately ten minutes
af ter you have hung up. Run-o
ntim e:
Yo u can change the run-on time by creating an
additional telephone boo kentry on the SIM card.
Fo r the name, enter "Nachlaufzeit" (run-on time)
and for thenumber, enterafigure between "1"
and "30" (minute s). If you do not enter a figure or
you enter an invalid figure, a run-on time of
appr oximately ten minutes will still apply.
You can read about how to make a telephone
book entry in the operating instructions for your
mobile phon e.
Own number sending:
The hands -free system cannot tell whether own
nu mb er sending is enabled or disabled in the
mobile phon e.The telephone number is there-
fore always sentby defau lt.
By creating an additional telephone book entry
on the SIM card , you can switch the own number
sending function on or off:
For the name, ent er"CALLID" and for the
number ,enter a "0" or a "1". Entering:
! "0" enable sown number sending
! "1" dis ables own number sending
You can read about how to make a telephone
book entry in the operating instructions for your
mobile phon e.
P82.70-5034-
31_neu_neutral 209en_d2.boo Seite
233 Dienstag, 25. Mai 2004 7:26 19

234 Controls in detail
Features
Removing the mobile
phone from the telepho
nebracket
Exa mple
1 Release but ton
2 Telephone bracket
6 Push release button 1and remove the
mobile phone towards the front from
telephone bracket 2. Fitting
the telephone bra cket
If you need to fit a different bracket for
your mobile phone, remove the existing
telephone bracket and then fit the one for
your phone.
Removing the exist ing telephone
bracket
Example
1 To release the telephone bracket
2 To remove the telephone bracket
3 Telephone bracket
6 Press the release button in the direc-
tion of arrow 1and remove telephone
bracket 3in the direction ofarrow 2.Fitting anoth
ertelepho nebracket
Example 1 Contac tsur face
2 Recesses
3 Telephone bracket
6 Position telephone bracket 3in
recesses 2of contact surface 1.
6 Slide telephone bracket 3forwa rds
until it engages.
P82.70-5035-
31_neu_neutral P82.70-5036-31_G1 P82.70-5037-31_G1209en_d2.boo Seite
234 Dienstag, 25. Mai 2004 7:26 19