2004 MERCEDES-BENZ CLK CABRIOLET wheel

144 Controls in detail
Automatic transmission*i
Youc annot chang egear using the steering
wh eel gearshift buttons if the selector lever isin
position P,N or R.
If manual gearshi ftprogram Misse lected and
yo u restart the engine, the automatic transmis-
sion wi llswitch over to an automatic gearshift
program .If automatic gearshift program Sor Cis
selected, the automatic transmi ssion will remain
in this gearsh ift pro gram even after the engine is
rest arted. Manual gearshift program
In
ma nualge arshif tpr ogram M, you can
chan ge gear yourself using the steering
wheel gears hift buttons or the selector
lever.
You can select manual gearshift program
M using the program selector switch. The program selector switch is located on
the lower section
ofthe centre console.
1 Program selector switch
S Sport for all normal driving
conditions
C Comfort for comfort mode
M Manual for manual gearshifting
6 Press program selector switch 1
repeatedly untilMfor man ualgearshift
progr amMappears in the speedome-
ter.
The automatic transmission switches
to ma nual gearshift program M. Auto-
ma tic shifting is deactivated. When the selector lever is in position
D,
you can shift up or down manually through
the individual gears. The gear currently
selected and engaged is shown in the
speedometer.
Upshifting
6 Press the selector lever briefly to the
rig ht,towards D+.
or
6 Press the outer section of one of the
buttons on the steering wheel
(=
page 143).
The automatic transmission shifts to
the ne xtgear up.
Downshifting P27.60-2510-31
G
Risk of accident Do not
change down for additio nal engine
braking ona slippery road surface. The drive
wheels could then lose thei rgrip and the
ve hicle could skid. 209en_d2.boo Seite
144 Dienstag, 25. Mai 2004 7:26 19

145
Controls in detail
Automatic transmiss ion*
6 Press the selector lever briefly to the
left, towards D–.
or
6 Press the inner section of one of the
buttons on the steering wheel
(=
page 143).
The automatic transmission shifts to
the next gear down.
Kickdown
You can also use kickdown inmanual gear-
shift program Mifyou wish to achieve
maximum acceleration:
6 Depress the acce lerator pedal beyond
the pressure point.
The automatic transmissio nshifts to
the next gear down, depending on the
engine speed.
6 Shiftup again as soon as the desired
sp ee d has been reached. i
If you apply full throttle, the automatic trans-
mi ssion will shi ftto the next gear up whe nthe
ma ximum engine speed is reached. This protects
th e engine against overspeeding.
If yo ubrake or come to ahalt, the automatic
tr ansmi ssion will shift down toa gear from which
you can acc eler ate or pull away easily.
Ma nualgear shift pr ogram Misdeselected if you:
! press the program selector switch
(=page 14
1).SorCap pears in the spe edom eter in this
case.
! restart the engine.
The automatic transmi ssion switches to an
automatic gearshi ftprogram in this case. The CLK 55
AMG can be driven in the auto-
matic or manual gearshift program.
! Drive the vehicle to warm the engine up
quickly. Do not make use of theen gine's full out-
put until its normal operating temperature has
be en reached.
Only move the selector lever toRwhen the vehi-
cl e is stationary.
Avoid allowing the drive wheels to spi nwhen
pulling away on slippery road surface s.You
could otherwise damage the drive train. Steering wheel gearshift buttons
You can change gear at any time using
either the steering wheel gearsh ift buttons
or the selector lever. Steering whee
lgearshift butto ns*
and the ma nual gearshift program*
CLK 55 AMG 209en_d2.boo Seite
145 Dienstag, 25. Mai 2004 7:26 19

146 Controls in detail
Automatic transmission*
The steering wheel gearshift buttons are
on the left and right-hand sides of the
steering wheel.
1 Gearshift button
2 Left-hand button: to downshift
3 Right-hand button: to upshift
Upshifting 6 Press right-hand button 3on the
steering wheel.
Th e automatic transmission shifts to
the next gear up. The shi ftrange is
extended when you are not driving in
ma nual gearshift program M
( = page 140). Downshifting
6 Press left- hand button 2on the steer-
ing wheel.
The automatic transmission shifts to
the next gear down. If you are not driv-
ing in manual gearshift program M, the
shift range isrestricted (
=page 14 0).
i You cann otchang egear usingt he stee ring
wheel gearshift buttons if the selector lever is in
position P,N or R.
If manual gearshift program Mis selected and
you restart the engine, the automatic transmis-
sion will switch over to an automa tic gearshift
program. If automatic gears hift program Sor Cis
selected, the automatic tra nsmission will remain
in th isgearshift program even after the engine is
restart ed. Manu
algearshift program
In ma nual gearshift program M, you can
change gear yourself using the steering
wheel gearsh ift buttons or the selector
lever. You can select manual gearshi ftpro-
gram Musing the program selector sw itch.
The program selector switch is located on
the lower section of the centre console.
1 Program selector switch
S Sp ort for all normal driving
conditions
C Comfort for comfort mode
M Manual for manual gearshifting P27.60-2509-31 G
Risk of accident Do not change down for addi
tional engine brak-
ing on a slippery road su rface. The drive wheels
could then lose th eir grip and th evehicle could
skid. P27.60-2510-31209en_d2.
boo Seite 146 Dienstag, 25. Mai 2004 7:26 19

147
Controls in detail
Automatic transmiss ion*
6 Press program selector sw itch 1
repeatedly untilMfor manual gearshift
program Mappears in the speedome-
ter display.
The autom atic tra nsm ission switches
to ma nual gearshif tprogram M. Auto-
matic shifting is deactivated. The shift
range is not restricted.
When the selector lever is in position D,
you can shift up or down manually through
the individual gears. The gear curr ently
selected and engaged is shown in the
speedometer displ ay.
Upshifting
! In manual gearshift pr ogram M,the auto-
matic transmi ssion doe snot shift up eve nif the
engine speed reaches the overrevving range.
Wh enthe max imum perm issibl e speed forthe
current gear isreached, the fuel supply iscut off
to prevent th eengine fro moverrevving. You
must make sure th atthe engine speed does not
reach the red area in the rev counter. There is
otherwise a danger of engine damage.
Shift up a gear if the
^upshift symbol appears
in th erev counter display inste adof
M. 6
Press the selector lever briefly to the
right, towards D+.
or
6 Press the right-hand button on the
steering wheel (
=pag e145).
The automatic transmission shifts to
the next gear up.
Downshifting
6 Press the selector lever briefly to the
left,to wa rds D–.
or
6 Press the left-hand button on the steer-
ing wheel (
=page 145).
The automatic transmission shifts to
the next gear down. i
If you brake or come to a halt without chang-
ing to a lower gear, the automatic tra nsmission
will shift down to a gear from which you can
acce lerate or pull away easily.
Kickdown
It is not possible to use kickdo wnin man-
ual gearshift program M.
i Manual gearshift program Mis deselected if
you:
! pressthe program selector switch
(= page 141).
!
SorCappears in the speedometer display in
th is ca se.
! restart the engine.
The auto matic tra nsmission switche sto an
au tomatic gearshift program in this case. G
Risk of accident Do
not chan gedown for additional eng ine
braking ona slippery road surface. The drive
wheels could lose their grip and the vehicle
could skid. 209en_d2.
boo Seite 147 Dienstag, 25. Mai 2004 7:26 19

148 Controls in detail
Good visibility
You will find information about the wind-
screen wipers and adj
usting the mirrors in
the "Getting started" section ( =page 31).
You will find information about mist edup
windscreens (= pages 159 and 169) and
demisting ( =pa ges 159 and 169) in the
"Thermatic" and "Thermotronic" sections.
The switch is located on the left next to the
steering wheel.
1 Headlamp cleaning 6
Make sure that the ignition isswitched
on.
6 Briefly press switch 1.
The headlamps are cleaned with a high-
pressur ewater jet. Rear-view mirror,
manual anti-da zzle
1 Anti-dazzle lever
6 Flick over anti-dazzl elever 1.
The rear-view mirror goes into anti-daz-
zle mode. Automatic anti-da
zzle mirrors*
The driver's side exterior mirror and the
rear-view mirror adjust automatically if:
! the ign ition is swi tched on and
! light from headlamps falls onthe sen-
sor in the rea r-view mirror
The mirrors do not go into anti-da zzle
mode when:
! reverse gear is engaged
! the interior lighting is switched on Good visi
bility Headlamp cleaning system*
P
82.10-2887-31 neu Mirrors
P68.40-2050-31 209en_d2.boo Seite
148 Dienstag, 25. Mai 2004 7:26 19

150 Controls in detail
Good visibility
Foldin
gthe exteri ormirro rsin/o ut automatically
If this function
isactivated inthe operating
system ( =page 130):
! the exterior mirrors fol din automati-
cally as soon as you lock the vehicle
from the outside
! the exterior mirrors fol dout again auto-
matically as soon as you unlock the
vehicle and then open the driver's or
passenger door
i The mirrors do not fold outif they have been
fold edin manuall y. Parking aid*
To make parking easier, the exterior mirror
on the front-passenger side moves into the
parking position as soon as you engage
reverse gear.
This makes it possible for you
to observe the kerb on the front-passenger
side.
You can only make use of this parking aid
if the parking position for the exterior mir-
ror on the front-passenger side has been
stored using the memory function*
( = pag e98). The buttons are located on the dashboard
between the steering wheel and the
driver's door.
1 Right-hand mirror
2 Left-hand mirror
6 Make sure that the ignition is switched
on.
6 Make sure that theMirror adjustment
pa rking aid
function in theConven-
ie nce
submenu is switched on
(
= pa ge 130). P88.70-2142-31209en_d2.boo Seite
150 Dienstag, 25. Mai 2004 7:26 19

155
Controls in detail
Thermatic (automatic air conditioni ng)
i For draught-free ventilation ,move the slid-
er s on the centre and side air vents to the centre. Th
ermatic control panel 1 Control panel
2 Swivelling centre air vent, right
3 Airflo
wthumbwheel, swivelling
side vent, right 4 Airflo
wthumbwheel, swivelling
side vent, left 5 Swivelling centre air vent,
left 6 Swivelling side vent,
left 7 Cockpit vent, upper section
8 Cockpit air vent thumbwheel,
upper secti
on 9 Swivelling centre air vent airf
low
thumbwheel a Swivelling side vent, right G
Risk of injury When Thermatic is in operation, very hot or
ve
ry cold air can flow from the air ven ts.This
can ca use burns or frostbite to unprotected
skin in the immediate vicinity of th events.
Keep bare skin away from thes eair outlets.
If neces sary, use the air-distribution control
to di rect th eairflow to a different area of the
vehicle interi or. 1 Airflow
2 Temperature, left
3 Temperature, right
4 Air
distribution 5 Sw
itches the rear window heating
on /o ff 6 Switching cooling on
/off 7 Switches the automatic
air condi-
tioning on /off 8 Sw
itches air-recirculation mode
on /o ff 9 Sw
itches demisting on /off P8
3.30-3899 -31 209en_d2.boo Seite
155 Dienstag, 25. Mai 2004 7:26 19

163
Controls in detail
Thermatic (automatic air conditioni ng)Controlling
airdi stribution
6 Slide the slider for left-hand centre air
vent 2or right-hand centre airvent 3
to the left, right, up or down.
The airflow is directed accordingly.
i For draught -fre ev enti lation, move the slid-
ers for the rear vents upwards. Controlling
thea irflow
6 Turn thumbwheel 1upwar dsordown-
wards.
The airflow is increased or reduced. 209en_d2.boo Seite
163 Dienstag, 25. Mai 2004 7:26 19