2004 MERCEDES-BENZ CLK CABRIOLET mirror

99
Controls in detail
Storing settings* (memory package)
6 Press button 2to adjust the exterior
mirror in such a way that you can see
the rear wheel and the kerb.
6 Press the Mmemory button in the
door.
6 Then press adjustment button 2up or
down and to the left or right within
three seconds.
The parking position is stored if the
mirror does not move.
i Ifth e mirror doe smove, repeat the step s.
Yo u ca n move the mirror again after storing the
setting. The exterior mirror returns to
its original
position:
! approximately 10 seconds after a for-
ward gear isengaged
! approximately 10 seconds after you
move the selector lever to position D
! ifyou exceed a speed of approximately
10 km /hregardless of the gear
engaged
! ifyou press the button for the exterior
mirror on the driver's side
You can activate and deactivate this func-
tion using the operating system
( = page 130).
You can store one parking position per key
and one parking position for the two
KEYLESS GO keys*. 209en_d2.boo Seite
99Diens tag, 25 .Mai 2004 7:26 19

118 Controls in detail
Operating system
This table shows the settings you can
make in the individual submenus. You will
find additional information on the following
pages.
: Instrument cluster Time Lighting Vehicle He
ater* Convenience*
Select the tempera-
ture display Set the
hours
(cl ock) Set constant
headlam
pmode Set permanent
Speedtro
nic Select the switch-
on time Ac
tivate the easy-
entry feature Select the speedome-
ter and total distance
rec
order Set the
minutes
(cl ock) Set the surround
li
ghti ng Set the station
se
lection (radio) Set the hours Set the key depend-
ence
Select the
language Sele
ctthe tim edis-
play Set exterior li
ght-
in g delayed
switch-off Set automatic
lo
ck ing Set the
minutes Set the parking posi-
tion
for the exterior
mirrors Select the status indi-
cator
display Set
interior light-
in g delayed
switch-off Select heater
booster* settings Fold in the exterior
mirrors when locking*
Select the standard
display209en_d2.boo Seite
118 Dienstag, 25. Mai 2004 7:26 19

129
Controls in detail
Operating system Convenience* submenu
You can access theConven
iencesubmenu
vi a the
Settings...menu. You can set cer-
tain convenience features in the
Conven-
ience
submenu.
You can make the following settings:
Activating the easy-entry feature*
You may activate or dea ctivat ethe easy-
entry feature using this function. Depend-
ing on your setting, the steering wheel
moves up and the dri ver's seat moves back
to help you to get out of the vehi cle when
you: !
remove the key from the ignition lock
! open the driv er's door and the key is in
position 0or 1in the ignition lock
On ce you have got into the vehicle, the
steering wheel and the seat return to the
last position set (
= page 97) when you: !
close the driver's door and
! insert the key into th eignition lock
i Press one of the fo llowing switches to can-
ce l the adjus tment procedu re:
! The seat adjustment switch (
=page 25)
! The steering columnadjustment swi tch
( = page 30)
! The memor ybutton (= page 97)
6 Move the bar to the
Conveniencesub-
menu using the æorç button.
6 Pres s the j ork button repeat-
edly until you see the
Function Easy-
entry feature
message.
The current setting is highlighted.
6 Select the function you requi reusing
the æ orç button. Fu
nction Page
Activate the easy-entry feature* 129
Set the key dependence* 130
Set the parking position for the
exterior mirrors* 130 G
Risk of injury Make sure that nobody can become trapped
wh
en you activate the easy- entry feature.
If danger threat ens, press one of the follow-
in g sw itch es:
! The seat adjustment switch ( =page 25)
! The ste ering column adjustm ent swi tch
( =
page 30)
! The memory button ( =page 97)
Never leave children unsupervised in the
ve hic le. They could open the driver 'sdoor
and thereby unintentionally activate the
eas y-entry feature.
P54.30-5228-31209en
_d2.boo Seite 129 Dienstag, 25. Mai 2004 7:26 19

130 Controls in detail
Operating system
You can select the following settings
for the easy-entry feature:
!off
The easy-entry feature is deacti-
vate d:
!
Steering col.
Only the steering column is moved.
!
Steer.co l.+seat
The steering column and the seat
are moved.
Sett ing the key dependence
This function allo wsyou to determine
whether stored settings for the seat, steer-
ing wheel and mirrors are stored as key-
dependent settings ( =page 97).
6 Move the bar to the
Conveniencesub-
menu using the æorç button.
6 Pres s the j ork button repeat-
edly until you see the
Key-dependent
message. The current setting is highlighted.
6 Switch the
Key- dependentsettingonor
offusing the æorç button.
Setting the parking position for the exte-
rio rmir rors
The
Mirror adjustment parking aidfunc-
tion allows you to determine whether the
exterior mirror on the front-passenger side
sho uld tilt downwards when parking with
reverse gear engaged ( =page 150).
6 Move the bar to the
Conveniencesub-
menu using the æorç button. 6
Press the jork button repea t-
edly until you see the
Mirror adjust-
me nt parking aid
message.
The current setting is highlighted.
6 Switch the
Mirror adjustment parking
ai d
functiononoroffby pressing the
æ orç button.
Folding in the exterior mirrors when
locking *
You can determine whether the exterior
mirrors should be folded in when you lock
the vehicle by using the
Fold in mirrors
when locking
function. The exterior mir-
rors will fol dback out again when you
switch on the ignition.
P54.30-5229-31 P54.30-5230-31209en_d2.boo Seite
130 Dienstag, 25. Mai 2004 7:26 19

131
Controls in detail
Operating system i
If you have switched onthis function and
folded in the exteri ormirrors using the button on
the centre console, themi rrors will not be folded
ou twhen the ignition is switched on. It isthen
only possible to fold out the mi rrors using the
button on the centre console.
6 Move the bar to theConveniencesub-
menu using the æorç button.
6 Press the korj button repea t-
edly until you see the
Fold in mirr ors
wh en locking
message inthe displ ay.
The current setting is highlighted.
6 Switch the Mirror setting when parking
function
onoroffusing the æor
ç button. You can call up statistical data for your
vehicle
inthe Trip computer menu.
You can call up the following information: Con
sumptio nstatistics after start
i Whenyou call up the trip computer again, it
displays the consumption statistics after start
first.
6 Press the ÿorè button repeat-
edly until you see the
After startmes-
sage in the display.
1 Short total distance recorder
2 Time elapsed since start
3 Average speed since start
4 Average fuel consumption since start
5 Distance driven since start Trip computer menu
Function Page
Consumption statistics after
start 131
Consumption statistics since
the
last reset 132
Ca
llup the range 132 P54.30-5231-31209en_d2.boo Seite
131 Dienstag, 25. Mai 2004 7:26 19

148 Controls in detail
Good visibility
You will find information about the wind-
screen wipers and adj
usting the mirrors in
the "Getting started" section ( =page 31).
You will find information about mist edup
windscreens (= pages 159 and 169) and
demisting ( =pa ges 159 and 169) in the
"Thermatic" and "Thermotronic" sections.
The switch is located on the left next to the
steering wheel.
1 Headlamp cleaning 6
Make sure that the ignition isswitched
on.
6 Briefly press switch 1.
The headlamps are cleaned with a high-
pressur ewater jet. Rear-view mirror,
manual anti-da zzle
1 Anti-dazzle lever
6 Flick over anti-dazzl elever 1.
The rear-view mirror goes into anti-daz-
zle mode. Automatic anti-da
zzle mirrors*
The driver's side exterior mirror and the
rear-view mirror adjust automatically if:
! the ign ition is swi tched on and
! light from headlamps falls onthe sen-
sor in the rea r-view mirror
The mirrors do not go into anti-da zzle
mode when:
! reverse gear is engaged
! the interior lighting is switched on Good visi
bility Headlamp cleaning system*
P
82.10-2887-31 neu Mirrors
P68.40-2050-31 209en_d2.boo Seite
148 Dienstag, 25. Mai 2004 7:26 19

149
Controls in detail
Good visi bility
! If electrolyte drips onto the vehicle 'spai nt-
work, immediately rinse the pai ntworkthor-
oughly with clean wa ter. Oth erwise, the
el ectrolyte could damage the paintwork.
Electrol yte can only be ri nsed off before it has
dried. Foldin
gthe exteri ormirro rsin/o ut*
The buttons are located above the parking
brake release handle.
1 To fold in the exterior mirrors
2 To fold out the exterior mirrors
6 Make sure that the ignition is switched
on.
Folding in the mirrors 6 Briefly press button 1.
Folding out the mirrors 6 Briefly press button 2.G
Risk of accident If incident headlamp ligh
tcannot strike the
sensor in the rear-view mirror, for instance,
if the rear window blind is extended, the mir-
ror's automatic anti-dazzle function will not
operate.
You could be dazzled byincident light. As a
result, you may nolon ger be able to observe
road and tra ffic condition sand cau sean
accid ent.In this case , flick theanti-dazzle
lever over by hand so that the rear-view mir-
ror goes into anti-dazzle mode ( =
page 148).
Do not permanently dea ctivate the anti-daz-
zle function. G
Risk of injury Electrolyte
may escapeif the glass in an
automatic anti-dazzl emirror brea ks.
El ectrolyte is a strong irritant and must not
be allowed to come into contact with your
skin, ey esor respiratory organ s.
If electrolyte comes into contact with your
eyes or skin, immediately rinse thoroughly
with clean water. Cons ult a do ctor ifnec es-
sary. P88.70-2136-31209en
_d2.boo Seite 149 Dienstag, 25. Mai 2004 7:26 19

150 Controls in detail
Good visibility
Foldin
gthe exteri ormirro rsin/o ut automatically
If this function
isactivated inthe operating
system ( =page 130):
! the exterior mirrors fol din automati-
cally as soon as you lock the vehicle
from the outside
! the exterior mirrors fol dout again auto-
matically as soon as you unlock the
vehicle and then open the driver's or
passenger door
i The mirrors do not fold outif they have been
fold edin manuall y. Parking aid*
To make parking easier, the exterior mirror
on the front-passenger side moves into the
parking position as soon as you engage
reverse gear.
This makes it possible for you
to observe the kerb on the front-passenger
side.
You can only make use of this parking aid
if the parking position for the exterior mir-
ror on the front-passenger side has been
stored using the memory function*
( = pag e98). The buttons are located on the dashboard
between the steering wheel and the
driver's door.
1 Right-hand mirror
2 Left-hand mirror
6 Make sure that the ignition is switched
on.
6 Make sure that theMirror adjustment
pa rking aid
function in theConven-
ie nce
submenu is switched on
(
= pa ge 130). P88.70-2142-31209en_d2.boo Seite
150 Dienstag, 25. Mai 2004 7:26 19