2004 MERCEDES-BENZ CLK CABRIOLET mirror

151
Controls in detail
Good visi bility
6 Press button 1for the right-hand mir-
ror.
6 Engag ere verse gear.
The mirror on the front-passenger side
turns downwards into the stored posi-
tion.
The exterior mirror reverts to its stored
drive position:
! ten seconds after reverse gear is disen-
gaged
! immediately, if you exceed a speed of
10 km /h
! immediately, if you press button 2The sun visors protect you from glare as
you are driving.
1 Retainer
2 Flap, e.g. for fuel cards
3 Mirror cov er
4 Mirror light Glare from the
front
6 Fold the sun visor down. Gl
arefrom the si de
6 Fold the sun visor down.
6 Pullthe sun visor out of retainer 1.
6 Swing the sun visor to the side. Su
n vi sors G
Risk of accident Keep the
mirrors in the sun visors covered
while you are driving. Dazzling light may oth-
erwise endanger yourself and others.
P68.60-2038-31 209en_d2.boo Seite
151 Dienstag, 25. Mai 2004 7:26 19

152 Controls in detail
Good visibilityMirror in the sun visor
i
Mirror light 4only worksif th e su nvisor is
engaged in retainer 1.
6 Make sure that the ignition is switched
on.
6 Fold the sun visor down.
6 Fold mirror cover 3upwards.
Mirror light 4lights up. The switch is located on the upper section
of the centre console.
1 To extend /retract
6 Make sure that the ignition isswitched
on.
! Make sure that th erear window blind can
move withou tobstr uction. Otherwi se,the blind
or objects could be damaged.
i Alwa ys exten dor re tract th erear wind ow
blind ful ly. Extending
6
Briefly press button 1.
The blind extends fully.
Halting the opening procedure 6 Press button 1again.
The blind stops moving. Retracting
6
Briefly press button 1.
The blind retracts fully.
Halting the opening procedure 6 Press button 1again.
The blind stops moving. Rear window blind*
P54.25-3816-31 209en_d2.boo Seite
152 Dienstag, 25. Mai 2004 7:26 19

235
Controls in detail
Features
The remote control integrated in the rear-
vi ew mirror allows you to operate up to
three different door and gate systems.
You can program the transmitter buttons.
i The garage door opener is only available for
certain countries. Observe the legal require-
ment sinall cou ntrie sc oncerned.
Some garage door ope ning systems cannot be
operated using the remote control. You may
ob tain more detailed information from a
Mercedes-Benz Service Centre. Remote contro
lin the rear-view mirror
1 Indicator lamp
2 Tran smitter button
3 Transmitter button
4 Transmitter button Programming the remote control
i
Youmust clear the remote control memory
be fore using the remote control for the first time
(= page 236).
6 Switch on the ignition.
6 Press and hold one of transmitt erbut-
tons 2to4 on the integrated remote
contro l.
Indicator lamp 1starts to fl ash after a
short while. It flashes about once a sec-
ond.
i Indicat or lamp1 flashes the first time the
transmitter button is programmed. If this trans-
mitt er bu tton has already been programmed,
indi cator lamp 1only starts flashing onceevery
sec ond after 20 seconds.
6 Continue to keep the transmitter but-
ton pressed.
6 Point the portable garage door remote
control and transmitt erat the left-hand
side of the rear-view mirror, from a dis-
tance of 5 to 20 cm. Garage door opener*
G
Risk of accident Only press th
etransmitter button on the
in tegrated remote control if there are no
persons or objects present within the sweep
of the garage door. Pers ons could otherwise
be injured as the door moves.
P68.05-2046-31
==209en_d2.boo Seite
235 Dienstag, 25. Mai 2004 7:26 19

236 Controls in detail
Featuresi
The distanc erequire dbe tween theportab le
garage door remot econtrol and the rear-view
mi rror depends on your garage door opening sys-
tem.
6 Keep one of the transmitter buttons
on the garage door remote control
pressed until indicator lamp 1flashes
rapi dly.
Pro gramming was successful ifindica-
to rla mp 1flashes rapidly.
If indicator lamp 1goes out after
approximately 20 seconds and did not
begin to flash rapidly:
6 Release the transmitter buttons on
the int egrate d and por tablere mote
controls.
6 Repeat the programming procedure
and alter the distance between the
po rtable garage doo rre mote con-
trol and the rear-view mirror.
6 Release the transm itter buttons on the
int egrated and portable remote con-
trols. i
If the garage door syst emworks with a roll-
ing code , youmust synchronise the remote con-
trol in the rear-view mirror with the garage door
syste m'sreceiver after you have programm ed
th ei ntegrated remote control.
You will find further information inthe operati ng
instructions for the garage door opening system,
e.g. the sections on "Sy nchronising the transmit-
ter" or "Regis tering a new transmitter". Opening
/closing the garage door
Once programmed, the integrated remote
control assumes the function of the garage
do or syste m's remote control. Please read
the Operating Instructions for the garage
doo rsystem.
6 Switch on the ignition.
6 Press the transmitter button in the
rear-view mirro rwhich you have pro-
grammed to operate this garage door.
Garage door system with a fixed code:
Indicator lamp 1lights up continu-
ously. Garage door system with a rolling code:
Indicator lamp
1flashes briefly and
then lights up for approximately two
seconds. This is repeated for up to
20 seconds.
i The transm itter transmits a signal for as long
as thetran sm itter button is pres sed.After ama x-
imum of 20 seconds the transmission is stopped
and indicator lamp 1flash es. Press the tra ns-
mitter button again if necessary. Cl
earing the re mote contr olmemory
6 Switch on the ignition.
6 Press and hold transmitter buttons 2
and 4for about 20 seconds until indi-
cator lamp 1flashes rapidly.
The memory is cleared.
i Clear the remote control memory before
selling the vehi cle. 209en_d2.boo Seite
236 Dienstag, 25. Mai 2004 7:26 19

268 Operation
CareAutomatic car wash
You can cl
ean the vehicle in an automatic
ca rw ash fr om the very st art. It isad vis able
to use automatic car washes without
brushes.
If the vehicle is very dirty, prewash it be-
fore you drive into the car wash.
After using anautom atic ca rwash, wipe off
wax fro mthe windscreen and the wiper
blades. This prevents smears.
! Make sure that the automatic car wash is
suitable for the size of the vehicle. Fold in the ex-
terior mirrors befor egoing through a car wash.
Make sure that the windscreen-wi per switch is
set to 0 ( =
pag e41). The exterior mirrors or
windscreen wipers cou ldotherwise be damaged.
i Make sure that the mirrors are fully folded
out whe nyou leave the automatic car wash. They
co uld oth erwise vibrate. High-pressure cleaners
!
Do not use high-pressure cleaners with
round-spray jet sfor cleaning the tyres. You could
ot he rwise damage the tyres .Replace damaged
tyres.
6 Direct the high-pressure cleaner nozzle
at the vehicle from a distance of at
least 30 cm.
6 Move the high-pressure cleaner nozzle
around when cleanin gyour vehicle.
! Do no tdirect it at door joints, air spring
bellows, ele ctrica l compone nts,conne ctors or
seals.
Clea ning the windscreen and wiper blades
6
Turn the ignition key to position 1.
6 Turn the windscreen wipers to
position Ion the combination switch
(= page 41).
6 Turn the ignition key to 0wh en the wip-
er arms are vertical. !
Fold the windscree nwipers away from the
windscreen only whe nthe yare vertical, other-
wise you will damage th ebonnet.
6 Fold the wiper arms away from the
windscreen until you feel them click
into place.
6 You can now clean the windscreen.
6 Fold the windscreen wipers back again
before you switch on the ignition. Vehicle care
G
Risk of injury Turn th
eignition key to 0before cleaning
the windscreen or wiper blade s.The wind-
sc reen wipers could otherwise move and in-
jure you. 209en_d2.boo Seite
268 Dienstag, 25. Mai 2004 7:26 19

299
Practical advice
Display messag esDisplay messages Possible cause
/consequ ence Possible sol
ution .Display faulty
Visit workshop! The lighting display has failed. 6
Visit a quali fied specialist workshop as
soon as possible, e.g. a Mercedes-Benz
Service Centre.
Turn signal , rear left
Back-up lamp on! The
rear left tu rnsign alisfau lty. An-
other lamp has taken over this func-
tion. 6
Change the bulb as soon as possible.
Turn signal , rear right
Back-up lamp on! The rear right turn signal is
faulty.
Another lamp has taken over this
function. 6
Change the bulb as soon as possible.
Turn signal in left
mirror The left turn signal in the exterior
mirror is faulty. This message only
appears if all light emitting diodes
have blown. 6
Visit a quali fied specialist workshop as
soon as possible, e.g. a Mercedes-Benz
Service Centre.
Turn signal in right
mirror The rig
htturn signal in the exterior
mirror is faulty. This message only
appears if al llight emitting diodes
have blown. 6
Visit a quali fied specialist workshop as
soon as possible, e.g. a Mercedes-Benz
Service Centre. 209en_d2.boo Seite
299 Dienstag, 25. Mai 2004 7:26 19

332 Practical advice
Trouble
shoo ting Mirrors and windows
Problem Possible cause
/conse quence Suggested solutions
An exterior mirror has been pushed out
of position forwards or backw
ards with
some force. 6
Briefly press the mirror-folding button*
(=
page 150) repeatedly until you hear the
mirror click into place.
The mirror housing has been re-engaged
and you can adjust the mirror as normal
( = page 150). A side window does not close complete-
ly when you pull the switch beyond the
pressure point and then release it. !
An object has becom etrappe dbe-
tween the side window and the door
fr am e.
! There are objects in the side window
guide rails which are preventing the
window from being raised. 6
Open the side window again.
6 Rem ove the obj ect.
6 Pull the switch beyond the pressure point
and release the switch.
Make sure that nobody can become
tr apped as you are doing this.
G There is otherwise a risk of injur y. 209en_d2.boo Seite
332 Dienstag, 25. Mai 2004 7:26 19

358 Practical advice
Changing bulbs Be
fore changing a bulb
! Only fit 12V bulbs of the same type as
before and of the correct wattage.
! Switch off the lights before changing a
bulbto avoid a short-cir cuit. !
Only hold bulbs with a clean, lint-free
cloth.
! Do not work with wet or greasy fingers.
! If the new bulb sti lldoes not light up,
visit a qualified specialist workshop,
e.g. a Merce des-Benz Service Centre.
! Have theLEDs and bulbs spec ifiedbe-
low replaced at a qualified specialist
workshop, e.g. a Mercedes-Benz Serv-
ice Centre. These are the:
! additional turn sign als in the exteri-
or mirrors
! third brake lamp
! front fog lamp bulbs
! xenon bulbs*
i Have the headlamp setting checked
regularly. G
Risk of inju ry Bulbs and lamps can be
come very hot. You
should therefore allow them to cool down
before you cha nge them.
Kee p bulbs out ofthe reach of children.
Never use abulb which has been dropped.
Such a bulb may explode and injure you.
H7 bulbs are pressurised and may explode
when they ar echanged. You should there-
fore wear eye protection and gloves when
you are changin gthem. G
Risk of injury Xe
non bulbs carry ahigh voltage. Do not re-
move the cover of the xenon bulb. Do not
change the xenon bulbs yourself. You should
hav e them chan gedat a qualified speci alist
workshop whic hhas th e necessary special-
ist knowledge and tools to carry out the
work requ ired. Mercedes-Benz recommends
that you use a Mercedes-Benz Service Cen-
tre for this purpose. In parti cular, work rele-
va nt to safety or onsafety-relate dsystems
must be carried out at a quali fied specialist
wor kshop. 209en_d2.boo Seite
358 Dienstag, 25. Mai 2004 7:26 19