Page 570 of 4264
10-62 CAB
Important Operations - Removal
1. Front Sill Plate
Pull out 4 clip positions.
2. Rear Sill Plate
Pull out 2 clip positions.
4. Fuel Filler Lid Opener Cover
Pull out the 3 clip positions.
5. Fuel Filler Lid Opener Lever
Remove the 2 opener fixing bolts and disconnect the
cable.
7. Fuel Filler Lid Cable Assembly
Remove some fixing clips, turn the cable holder on the
side of recess in 90counterclockwise and remove i
t
from the recess. Pull out the grommet to frontward o
f
vehicle and remove the cable assembly.
Page 571 of 4264
CAB 10-63
INSTALLATION (REGULAR CAB RHD MODEL)
686R300017
Installation Steps
1. Fuel filler lid cable assembly
2. Rear wheel housing extension panel
3. Fuel filler lid opener lever
4. Fuel filler lid opener cover
5. Front sill plate
Page 572 of 4264
10-64 CAB
INSTALLATION (EXTEND CAB RHD MODEL)
686R300019
Installation Steps
1. Fuel filler lid cable assembly
2. Rear wheel housing extension panel
3. Fuel filler lid opener lever
4. Fuel filler lid opener cover
5. Front sill plate
Page 573 of 4264
CAB 10-65
INSTALLATION (CREW CAB RHD MODEL)
686R300013
Installation Steps
1. Fuel filler lid cable assembly
2. Rear wheel housing extension panel
3. Fuel filler lid opener lever
4. Fuel filler lid opener cover
5. Center pillar lower trim cover
6. Rear sill plate
7. Front sill plate
Page 574 of 4264
10-66 CAB
INSTALLATION (REGULAR CAB LHD MODEL)
RTW4A0LF000401
Installation Steps
1. Fuel filler lid cable assembly
2. Rear wheel housing extension panel
3. Fuel filler lid opener lever
4. Fuel filler lid opener cover
5. Front sill plate
Page 575 of 4264
CAB 10-67
INSTALLATION (EXTEND CAB LHD MODEL)
RTW4A0LF000501
Installation Steps
1. Fuel filler lid cable assembly
2. Rear wheel housing extension panel
3. Fuel filler lid opener lever
4. Fuel filler lid opener cover
5. Front sill plate
Page 576 of 4264
10-68 CAB
INSTALLATION (CREW CAB LHD MODEL)
RTW4A0LF000601
Installation Steps
1. Fuel filler lid cable assembly
2. Rear wheel housing extension panel
3. Fuel filler lid opener lever
4. Fuel filler lid opener cover
5. Center pillar lower trim cover
6. Rear sill plate
7. Front sill plate
Page 577 of 4264
CAB 10-69
Important Operation - Installation
1. Fuel Filler Lid Cable Assembly
Install the cable holder of cable assembly to the recess
and push the grommet in to the back panel. Fix the clips
to the pointed places.
Note:
To install, follow the removal steps in the reverse order,
noting the following points.
Do not make extreme curve on the cable.
Install the cable from inside of the cab.
