2004 HONDA CR-V lights

[x] Cancel search: lights

Page 158 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual When preparing to tow, and bef ore
driving away, be sure to check the
f ollowing:The vehicle has been properly
serviced, and the tires, brakes,
suspension, and cooling system
are in good operating con

Page 167 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual This section explains why it is
important to keep your vehicle well
maintained and how to f ollow basic
maintenance saf ety precautions.
This section also includes
Maintenance Schedules f or normal
dr

Page 171 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual µµ µ
µ
µ µ µ
Youshouldcheckthefollowing
items at the specif ied intervals. If
you are unsure of how to perf orm
any check, turn to the appropriate
page listed. Engine oil level Check eve

Page 173 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual Î
Î
Ì Î
µ
ÌÌÎÎ
Î
Follow the Severe Maintenance
Schedule if you drive your vehicle
MAINLY under one or more of the
f ollowing conditions: Extensive idling or long periods of
stop an

Page 187 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual Theheadlightswereproperlyaimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer, a
readjustment may be required.
Adjustments should be perf ormed by
a

Page 188 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual Unclip the end of the hold-down
wire f rom its slot. Pivot it out of
the way and remove the bulb.
Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
b

Page 189 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual The f ront parking light is next to
the headlight bulb.Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket.
Push the

Page 190 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual Open the tailgate. Place a cloth on
the edge of the cover. Remove the
covers by caref ully prying on the
edge with a small f lat-tipped
screwdriver.Use a Phillips-head screwdriver to
remove the tailli
Page:   < prev 1-8 9-16 17-24 25-32 33-40 next >