2004 HONDA CR-V Owners Manual

Page 217 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual Let the vehicle sit f or a minute.
Open the hood, and check the oil
level (see page ). An engine
very low on oil can lose pressure
during cornering and other driving
maneuvers.
If necessary, add oil t

Page 218 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual To check if they are set, turn the
ignition to ON (II), without starting
the engine. The Malf unction
Indicator Lamp will come on f or 20
seconds. If it then goes of f , the
readiness codes are set. I

Page 219 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual However, if the brake pedal does not
f eel normal, you should take
immediate action. A problem in one
part of the system’s dual circuit
design will still give you braking at
two wheels. You will f e

Page 220 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual If your vehicle needs to be towed,
call a prof essional towing service or
an organization. Never tow your
vehicle with just a rope or chain. It is
very dangerous.The operator will load
your vehicle on

Page 221 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual If the electric motor will not close
the moonroof , do the f ollowing:Check the f use f or the moonroof
motor (see page ). If the f use
is blown, replace it with one of the
same or lower rating.
Try c

Page 222 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual Turn the ignition switch to LOCK
(0). Make sure the headlights and
all other accessories are off.
Remove the cover f rom the f use
box.
If something electrical in your
vehicle stops working, check f o

Page 223 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual Check the smaller f uses in the
under-hood f use box and all the
fuses in the interior fuse box by
pulling out each f use with the f use
puller provided in the under-hood
fuse box.
Look f or a burned

Page 224 of 256

HONDA CR-V 2004 RD4-RD7 / 2.G Owners Manual If the radio f use is removed, the
audio system will disable itself . The
nexttimeyouturnontheradioyou
will see ‘‘COdE’’ in the f requency
display. Use the Preset buttons to
enter the f ive-di