2004 FORD EXPLORER Owners Manual

Page 49 of 296

FORD EXPLORER 2004 3.G Owners Manual Rear center console features (if equipped)
The rear center console incorporates the following features:
•Utility compartment
•Cupholders
•Removable tray
•Flip forward armrest to provide a
flat

Page 50 of 296

FORD EXPLORER 2004 3.G Owners Manual Installing a garage door opener (if equipped)
The storage compartment can be converted to accommodate a variety of
aftermarket garage door openers:
•Place the Velcro hook onto the
side of the afterm

Page 51 of 296

FORD EXPLORER 2004 3.G Owners Manual Illuminated visor mirror (if equipped)
Lift the mirror cover to turn on the
visor mirror lamps.
AUXILIARY POWER POINT
Power point outlets are designed
for accessory use only. Do not
hang any type of a

Page 52 of 296

FORD EXPLORER 2004 3.G Owners Manual POWER WINDOWS
When closing the power
windows, you should verify
they are free of obstructions and
ensure that children and/or pets
are not in the proximity of the
window openings.
Press and hold the b

Page 53 of 296

FORD EXPLORER 2004 3.G Owners Manual POWER SIDE VIEW MIRRORS
The ignition must be in the ACC or ON position to adjust the power side
view mirrors.
To adjust your mirrors:
1. Rotate the control clockwise to
adjust the right mirror and rot

Page 54 of 296

FORD EXPLORER 2004 3.G Owners Manual POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)
The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P (Park) position.
Press and hold the r

Page 55 of 296

FORD EXPLORER 2004 3.G Owners Manual 3. Press the SET + control and
release it.
4. Take your foot off the accelerator
pedal.
5. The indicator light
on the
instrument cluster will turn on.
Note:
•Vehicle speed may vary momentarily when

Page 56 of 296

FORD EXPLORER 2004 3.G Owners Manual Increasing speed while using speed control
There are two ways to set a higher
speed:
•Press and hold the SET + control
until you get to the desired
speed, then release the control.
You can also use