Page 109 of 202

108
CONNECT NAV
NAVIGATOR
With Radio mode on
To play an audio CD inserted in the
CD-Changer when the Radio is on,
proceed as follows:
1) press ESC (9)
2)turn the knob/button (11) to dis-
play CD-Cfig. 46
3)press the knob/button (11) to
confirm
The system will automatically start
playing the audio CD in the internal
CD player if this was the last source
and the CD is still inside. Otherwise,
the last played CD or the first CD in
the CD-Changer will be played.TURNING ON THE
CD Changer (where fitted)
IMPORTANT The system will au-
tomatically start playing the audio CD
in the internal CD player if this was the
last source and the CD is still inside.
Proceed as follows if there is an au-
dio CD in the internal player:
1)press SRC (17) to display the CD
functions menu fig. 47
2)press button (13) next to CD.The main CD-Changer menu fig. 48
will be displayed. The track number
and playing time will appear in the up-
per row, while in the middle will be
displayed the names of the first 5 CDs
inserted in the CD-Changer and the
option enabling to go to the second
page of the menu.
IMPORTANT If no CD is inserted
in the CD-Changer or CDs are illegi-
ble, playback of these CD will be im-
possible. The display will show SCAN
or a warning message if after switch-
ing the system on the CD-Changer
was empty or was containing at least
an audio CD.
fig. 48F0E3023gfig. 47F0E3022g
Page 112 of 202

111
CONNECT NAV
NAVIGATOR
SCANNING TRACKS
If you want to listen to a certain part
of the track being played, you can scan
the track: hold ùor §on selector
(2) pressed during playback. The track
will be scanned forwards or back-
wards.
IMPORTANT The display will re-
turn to the main CD menu if no op-
eration is carried out in the CD
Changer (where fitted), functions
menu for 30 seconds.MIX FUNCTION
(random playback)
The MIX function can be used to play
in random sequence the tracks on the
current CD or on all the CDs in the
CD-Changer (where fitted).
Proceed as follows to switch the
function on:
1) in CD-Changer mode, press SRC
(17) the display will show the CD-
Changer functions menu fig. 52
2) press (14) relevant to MIX, the
display will show MIX in the lower
row
3)press MEN (10), the display will
show the CD Changer setup menu
fig. 524) press (14) relevant to MIXfig. 51
to select the required option:
– CD to play the tracks on the
current CD in random se-
quence;
– MAG to play the tracks on all the
CDs in the CD-Changer in
random sequence.
Press button (14) next to MIX again
to switch the MIX function off.
The MIX function will end automat-
ically if the SCAN or REPEAT func-
tions are switched on.
Press ESC (9) to return to the pre-
vious screen.
fig. 52F0E3026gfig. 51F0E3024g
Page 113 of 202

112
CONNECT NAV
NAVIGATOR
SCAN FUNCTION
(scanning all tracks on a cd)
The SCAN function plays all the
tracks for 10 seconds starting from the
current track. Proceed as follows to
scan all the tracks on a CD:
1)in CD-Changer mode (where fit-
ted), press SRC (17) to go to CD-
Changer functions menu fig. 52
2) press (14) relevant to SCAN
fig. 53: the display will show SCAN in
the lower row3)press MEN (10), to display the
CD-Changer setup menu fig. 52
4)press the button (14) next to
SCAN to select the required option:
– CD to scan all the tracks on the
current CD;
– MAG to scan all the tracks on all
CDs in the CD-Changer.
Press the button (14) next to SCAN
again to switch the function off.
The SCAN function will end auto-
matically if the MIX or REPEAT func-
tions are switched on.
Press ESC (9) to return to the pre-
vious screen.REPEAT FUNCTION
(repeating the cd tracks)
The REPEAT function can be used to
repeat the same track or the same
CD.
Turning the function on
Proceed as follows:
1)select the required track or CD
with button
ùor §on selector (2)
during playback
2)in CD-Changer mode, press SRC
(
17) button, the display will show the
CD-Changer functions menufig. 53
fig. 54F0E3027gfig. 53F0E3025g
Page 155 of 202

154
CONNECT NAV
NAVIGATOR
According to the phone and SIM card
state, when requesting the MEDICAL
ADVICE, the following could take
place:
–Targa Infomobilityservices not
enabled or SIM card not recognised:
emergency call is directly forwarded
to the international number “112”,
– Targa Infomobilityservices en-
abled and SIM card not recorded:
emergency call is forwarded to the
personal number stored according to
the procedure described in the pre-
vious paragraph “Entering the personal
number”.
– Targa Infomobilityservices not
enabled and SIM card enabled: emer-
gency call is forwarded to the personal
number stored according to the pro-
cedure described in paragraph “En-
tering the personal number ".
According to the selected setting, this
function can be activated in “Auto-
matic” or “Manual” mode (see next
paragraphs).
IMPORTANT Make “112” emer-
gency calls only when there is a real
emergency. Emergency call misuse is li-
able to punishment.Manual activation
Proceed as follows:
1) press
•(7)
2) turn the knob/button (11) to se-
lect MEDICAL ADVICE fig. 122
3)press the knob/button (11) to
confirm: the display will ask for con-
firmation
4) press the knob/button (11) to
confirm: the emergency call will be
then forwarded toTarga Infomo-
bilitycontact centre.
5)press ESC (9) to interrupt.Automatic activation
Proceed as follows:
1)press
•(7)
2)turn the knob/button (11) to se-
lect MEDICAL ADVICE fig. 122
3)press the knob/button (11) to
confirm: the display will show a mes-
sage specifying that the emergency call
will be started after about 20 seconds.
The remaining time is shown on the
display and when it expires the request
will be automatically forwarded to the
Targa Infomobilitycontact centre.
4)press ESC (9) to interrupt the call
before time expiring
IMPORTANT After starting the
emergency call, a message (SMS) will
be sent to the Targa Infomobility
contact centre that will call you back
as soon as possible.
fig. 122F0E3177g
Page 156 of 202

155
CONNECT NAV
NAVIGATOR
Selecting the emergency
call mode
This function shall be used to choose
how to forward the emergency call:
(“Manual activation”) by pressing the
knob/button (11) to confirm, or (“Au-
tomatic activation”) after 20 seconds.
The default setting is “Manual activa-
tion”.To select the required mode, pro-
ceed as follows:
1)press
•(7) button
2)press MEN (10) button
3) turn the knob/button (11) to se-
lect MODEfig. 123
4)press the knob/button (11) to
confirm: the display will show the cur-
rently active mode and will ask if you
want to change it
5)press the knob/button (11) to
change mode, otherwise press ESC (9)“ROAD ASSISTANCE”
SERVICE
This function is available only if Tar-
ga Infomobilityservices are enabled
and the SIM card used is properly con-
figured with a service profile.
Selecting and activating this function,
a message calling for road assistance is
sent to the Targa Infomobilitycon-
tact centre, completed with the posi-
tion of the car to allow it to be locat-
ed.
After sending the assistance request,
the Targa Infomobilityoperator
will call you back as soon as possible.
To forward the request for road as-
sistance apply the following procedure:
1) press
•(7) button
2)turn the knob/button (11) to dis-
play ROAD ASSIST. fig. 124
3) press the knob/button (11) to
confirm: the display will ask for con-
firmation
fig. 123F0E3178g
Page 196 of 202
195
CONNECT NAV
NAVIGATOR
A A
N N
T T
I I
T T
H H
E E
F F
T T
P P
R R
O O
T T
E E
C C
T T
I I
O O
N N
S S
Y Y
S S
T T
E E
M M
CODE CARD
This card fig. 198certifies that you
are the owner of the system. The
model, serial number and secret code
are printed on the card.
IMPORTANT Keep the card in a
safe place. You will need the informa-
tion to report theft to the police. The
card is required whenever the battery
or power supply is disconnected. You
will need to enter the secret code af-
ter reconnecting the battery or the
power supply.Entering the security code
Enter the security code when you
switch the system on after cutting off
the power supply (disconnecting the
battery, removing the device, blown
fuse, etc.) fig. 199.
fig. 199F0E3094gfig. 198F0E3093g
GENERAL INFORMATION
The system is equipped with a four-
digit secret security code.
This ensures that the system cannot
be used if it is removed from the dash-
board (i.e. stolen).