2004 DODGE RAM 1500 GAS Owners Manual

Page 249 of 429

DODGE RAM 1500 GAS 2004 3.G Owners Manual Tread Wear Indicators
Tread wear indicators are in the original equipment tires
to help you in determining when your tires should be
replaced.
These indicators are molded into the bottom of the tread

Page 250 of 429

DODGE RAM 1500 GAS 2004 3.G Owners Manual WARNING!
²Do not use a tire, wheel size or rating other than
that specified for your vehicle. Some combina-
tions of unapproved tires and wheels may change
suspension dimensions and performance chara

Page 251 of 429

DODGE RAM 1500 GAS 2004 3.G Owners Manual Improper alignment will not cause vehicle vibration.
Vibration may be a result of tire and wheel out-of-
balance. Proper balancing will reduce vibration and
avoid tire cupping and spotty wear.
SUPPLEM

Page 252 of 429

DODGE RAM 1500 GAS 2004 3.G Owners Manual These cautions apply to all chain traction devices, includ-
ing link and cable (radial) chains.
Tire chain use is permitted only on the rear tires of Ram
4X2 trucks.
NOTE:The use of class ªSº chains

Page 253 of 429

DODGE RAM 1500 GAS 2004 3.G Owners Manual SNOW TIRES
Snow tires should be of the same size and type construc-
tion as the front tires. Consult the manufacturer of the
snow tire to determine any maximum vehicle speed
requirement associated wit

Page 254 of 429

DODGE RAM 1500 GAS 2004 3.G Owners Manual Follow the recommended tire rotation frequency for your
type of driving found in the ªMaintenance Schedulesº
Section of this manual. More frequent rotation is permis-
sible if desired. The reasons f

Page 255 of 429

DODGE RAM 1500 GAS 2004 3.G Owners Manual Dual Rear Wheels
The tires used on dual wheel assemblies should be
matched for wear to prevent overloading one tire in a set.
To check if tires are even, lay a straight edge across all
four tires. The

Page 256 of 429

DODGE RAM 1500 GAS 2004 3.G Owners Manual FUEL REQUIREMENTS
All engines (except 5.7L engines) are de-
signed to meet all emissions regulations
and provide excellent fuel economy and
performance when using high quality un-
leaded ªregularº g