Page 8 of 249

▫To Program Additional Transmitters.........20
▫Transmitter Linked To Memory Programming . .21
▫General Information....................22
▫Transmitter Battery Service...............22
Security Alarm System— If Equipped........23
▫To Set The Alarm......................23
▫To Disarm The System...................24
▫Security System Manual Override...........24
Power Windows........................25
Remote Trunk Lid Release................25
Trunk Safety Warning....................26
▫Trunk Emergency Release................26
Occupant Restraints.....................26▫Lap/Shoulder Belts.....................27
▫Seat Belts And Pregnant Women............32
▫Seat Belt Extender......................32
▫Driver And Right Front Passenger Supplemental
Restraint System (SRS) - Airbag............33
▫Child Restraint........................40
Engine Break-In Recommendations..........47
Safety Tips............................47
▫Exhaust Gas..........................47
▫Safety Checks You Should Make Inside
The Vehicle..........................48
▫Periodic Safety Checks You Should Make Outside
The Vehicle..........................48
8 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Page 21 of 249

will hear a chime after each transmitter has been success-
fully programmed. You will have 30 seconds to finish
programming all new transmitters. A chime will sound
when the 30 seconds is over or the ignition switch is
turned to the Lock position.
Transmitter Linked to Memory Programming
Your remote transmitters can be programmed to return
the driver’s seat, mirrors, and radio presets to the saved
position when the Unlock button is pressed and released.
NOTE:When newly purchased (or replacement) trans-
mitters are programmed into the vehicle, the first trans-
mitter programmed will be associated with memory
setting 1, and the second transmitter programmed will be
associated with memory setting 2. Additional transmit-
ters will not be associated with a memory setting.
To program your transmitters, perform the following:
1. Insert key into the igniton and turn the key to the
On/Run position.
2. Adjust the seat and side view mirrors to the desired
position. Program the radio preset buttons to the desired
stations.3. Press and release the Set (S) button on the memory
seat switch, then press and release memory button 1 or 2.
4. Press and release the Lock button on the transmitter.
This will link the transmitter to the desired memory
setting.
5. Do not press any buttons for 10 seconds.
NOTE:Your transmitters may be unlinked from your
memory settings by following the procedure above ex-
cept pressing the Unlock button on the transmitter in step
4 above. On vehicles equipped with an EVIC (Electronic
Vehicle Information Center), these functions can be se-
lected at the EVIC using the Customer Programmable
Features. Refer to EVIC-Customer Programmable Fea-
tures for details. When newly purchased (or replacement)
transmitters are programmed into the vehicle, the first
transmitter trained will be associated with memory set-
ting 1, and the second transmitter trained will be associ-
ated with memory setting 2. Additional transmitters will
not be associated with a memory setting.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21
2
Page 244 of 249

Headlights........................... 62
Headlights On Reminder................ 62
High Beam Indicator................... 89
Illuminated Entry...................... 14
Instrument Cluster..................... 61
Interior...........................14,60
License............................. 207
Low Fuel............................ 88
Low Washer Fluid..................... 89
Malfunction Indicator................90,169
Map Reading......................... 61
Oil Pressure.......................... 88
Park.............................62,205
Passing............................. 64
Reading............................. 70
Rear Tail............................ 207
Seat Belt Reminder..................... 89
Security Alarm........................ 24
Service Engine Soon................... 169
Side Marker......................... 205
Theft Alarm.......................... 10
Traction Control..................66,88,136
Trunk Ajar........................... 88Turn Signal.....................89,205,207
Voltage.............................. 91
Locks
Child Protection....................... 16
Cylinder............................ 185
Door.............................14,15
Glove Compartment.................... 14
Lubricants............................ 184
Luggage Carrier........................ 148
Luggage Rack......................... 148
Lumbar Support........................ 57
Maintenance Free Battery................. 181
Maintenance Schedule................... 212
Light Duty ScheduleB................ 215
ScheduleA......................... 222
ScheduleB......................... 215
Malfunction Indicator Light.............90,170
Manual, Service........................ 233
Master Key............................. 9
Memory Seat........................... 21
Mirrors............................... 53
Automatic Dimming.................... 53
244 INDEX