2004 DODGE INTREPID jacking

WHAT TO DO IN EMERGENCIES
CONTENTS
Hazard Warning Flasher.................152
If Your Engine Overheats................152
Jacking And Tire Changing...............153
▫Preparations For Jacking................154
▫Jacking And Changing a Tire.............154
▫Compact Spare Tire-For Temporary Emergency
Use Only...........................157
▫Wheel Cover Installation (If Required)......157
Jump-Starting The Battery...............158
Driving On Slippery Surfaces.............161
▫Acceleration.........................161
▫Traction............................161
Freeing A Stuck Vehicle.................162
Towing A Disabled Vehicle...............163
6

the fan control to High. This allows the heater core to act
as a supplement to the radiator and aids in removing heat
from the engine cooling system.
CAUTION!
Driving with a hot cooling system could damage
your vehicle. If temperature gauge reads “H”, pull
over and stop the vehicle. Idle the vehicle with the
air conditioner turned off until the pointer drops
back into the normal range. If the pointer remains on
the “H”, turn the engine off immediately, and call for
service.
WARNING!
A hot engine cooling system is dangerous. You or
others could be badly burned by steam or boiling
coolant. You may want to call a service center if your
vehicle overheats. If you decide to look under the
hood yourself, see Section 7, Maintenance, of this
manual. Follow the warnings under the Cooling
System Pressure Cap paragraph.
JACKING AND TIRE CHANGING
WARNING!
Getting under a jacked-up vehicle is dangerous. The
vehicle could slip off the jack and fall on you. You
could be crushed. Never get any part of your body
under a vehicle that is on a jack. Never start or run
the engine while the vehicle is on a jack. If you need
to get under a raised vehicle, take it to a service
center where it can be raised on a lift.
WHAT TO DO IN EMERGENCIES 153
6

Preparations For Jacking
•
Turn on the Hazard Warning Flashers and park the
vehicle on a firm level surface, avoiding ice or slippery
areas.
•Put the gear shift in PARK (Automatic transmission)
or REVERSE (Manual Transmission).
•Set the parking brake and turn off the engine.
WARNING!
Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.
Jacking and Changing a Tire
1. Block the wheel diagonally
opposite the flat tire. Passengers
should not remain in the vehicle
when the vehicle is being jacked.
154 WHAT TO DO IN EMERGENCIES

Service Engine Soon Light................ 169
Service Manuals........................ 233
Setting the Clock........................ 93
Shoulder Belts.......................... 31
Side Airbag............................ 38
Side View Mirror Adjustment............... 54
Side Window Demisters.................. 122
Signals, Turn........................... 64
Slippery Surfaces, Driving On............. 161
Snow Chains.......................... 140
Snow Tires............................ 140
Spare Tire............................ 139
Spark Plugs........................... 178
Specifications.......................... 208
Engine............................. 208
Speed Control........................67,89
Speedometer........................... 89
Starting.............................. 127
Steering
Linkage............................ 184
Power...........................135,183
Tilt Column.......................... 65
Stuck, Freeing......................... 162Sulfur in Gasoline...................... 145
Sun Roof............................76,77
Supplemental Restraint System - Airbag....... 33
Synthetic Engine Oil..................... 177
Tachometer............................ 88
Temperature Gauge, Engine Coolant......... 153
Theft Alarm............................ 23
Theft System........................... 23
Tilt Steering Column..................... 65
Time Delay, Headlight.................... 62
Timing Belt........................... 180
Tires ...........................48,136,235
Air Pressure......................136,137
Alignment.......................... 143
Balancing........................... 143
Chains............................. 140
Changing........................153,154
Flat Changing........................ 153
High Speed......................... 138
Jacking............................. 154
Pressure Label....................... 137
Quality Grading...................... 235
INDEX 247
10