1
General information and controls
14
Helmet holder Turn key in helmet/seat lock to position B.
The helmet holder 3 is open
Close the helmet holder by pressing it lightly into the hel-
met/seat lock until it engages
Removing seats Turn key in helmet/seat lock
to position A.
Lift off the rear seat in the
direction indicated by arrow 1
– You now have access to the
toolkit and the on-board doc-
umentation. You can also
remove the front seat
Lift off the front seat in the direction indicated by arrow 2
– You now have access to the fuses ( b Maintenance
Instructions, Chapter 2)
A2
1
B
Seat/helmet holder
3
10r28bkg3.book Seite 14 Dienstag, 25. Mai 2004 5:26 17
1
General information and controls
16
Removing single seat Turn key in seat lock to
position A
Remove rear seat (
b 14)
OEOptional extra
Closing the storage
compartment
e Attention:
When installing, make sure that
storage-compartment cover
OE1
is correctly secured.
Push storage-compartment
cover
OE 1 toward the rear into
the catch and apply light
pressure until it engages in
the seat holder
Seats
A
1
10r28bkg3.book Seite 16 Dienstag, 25. Mai 2004 5:26 17
