Maintenance6112
• The procedure for changing the high-beam headlight
bulb is the same as that for
the low-beam bulb. Note,
however, that the high-beam
headlight bulb is held in
place by a single-leg, vertical
spring clip.Replacing parking light
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcycle
is steady on its stand. c• Switch off the ignition.
• Remove securing screws
1
on both sides of the bulb
housing. • Pull the bulb housing for-
ward and tilt it slightly down.
• Turn bulb holder 2 counter-
clockwise to remove it from
the headlight housing.
• Remove bulb 3 from the bulb
holder.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold the new bulb.
i157
Index
Calling up settings, 49
Explanations, 49
Operation, 14FFront-wheel stand, 107
FuelFuel gauge, 20
Grade, 73
Quality, 137
Refuelling, 74
Reserve warning, 24
Fuel tank capacity, 74
Fuses, 138GGear indicator, 20
Gearbox Gear shifts, 64
Position on starting, 57
Technical data, 132
General view
Right side, 11 General view,
left side, 9
Grip heating, 15, 39
HHandlebar fitting Left, 14
Right, 15
Hazard warning flashers, 14, 36, 37
Headlight Adjustment for right-hand/left-
hand traffic, 42
Overview, 17
Headlight flasher, 14, 42
Helmet holder, 45
High-beam headlight
Bulb, 17
Replacing the bulb, 111
Switching on, 14, 42
Telltale light, 20
Horn, 14
IIgnition
Switching off, 34
Switching on, 34, 57
Inflation pressures, 130
Instrument cluster, 16JJump starting, 115KKeys Ignition keys, 34
Replacement keys, 35
Kill switch, 15, 38LLaying up, 124
Locking the handlebars, 35
Low-beam headlight
Bulb, 17
Replacing bulb, 110
Switching on, 41