Remove the two bolts and the
three nuts with a 7/16 in (10 mm)
wrench, then remove the engine
cover.Loosen the bleeder bolt on top of
the engine.Pour Honda All Season
Antif reeze/Coolant Type 2 into
the radiator up to the base of the
f iller neck. This coolant is a
mixture of 50 percent antif reeze
and 50 percent water. Pre-mixing
is not required.
The cooling system capacity is:
Tighten the bleeder bolt when
coolant comes out in a steady
stream with no bubbles.
7. 8. 9.
10.
Cooling Syst em
Maint enance260
BLEEDER BOLT
BOLTS NUTS
1.61 US gal (6.1)
µµÎ
Î
Î
Î
T echnical Inf ormation
Specif ications
338
Dimensions
Weights
Air Conditioning Capacities
Excluding the oil remaining in the engine. Including the coolant in the reserve tank and that remaining in the
engine.
Reserve tank capacity: 4.5 US qt (4.3
)
196.7 in (4,995 mm)
71.7 in (1,820 mm)
54.5 in (1,385 mm)
114.6 in (2,910 mm)
61.0 in (1,550 mm)
60.6 in (1,540 mm)
HFC-134a (R-134a)
24.7 26.5 oz (700 750 g) ND-OIL8 18.0 US gal (68
)
1.61 US gal (6.1)
2.27 US gal (8.6)
4.9 US qt (4.6
)
5.6 US qt (5.3
)
3.2 US qt (3.0)
9.1 US qt (8.6)
1.11 US qt (1.05
)
1.16 US qt (1.10)
2.6 US qt (2.5)
6.9 US qt (6.5)
0.172 US gal (0.65
)
Length
Width
Height
Wheelbase
Track
Gross vehicle weight rating See the certification label attached
to the driver’s doorjamb.
Refrigerant type
Charge quantity
Lubricant type Fuel tank
Engine
coolant
Engine oil
Automatic
transmission
fluid
Differential
oil
Windshield
washer
reservoir
1:
2: Approx.
Front
Rear Change
Total
Change
Including filter
Without filter
Total
Change
Total
Change
Total
U.S. Cars
Canada Cars
1
2
