2003 YAMAHA YFM350R headlight bulb

Brake and shift pedal/brake and
clutch lever lubrication...................... 8-67
Front upper and lower arm pivot
lubrication ......................................... 8-69
Rear arm pivot lubrication .................. 8-71
Wheel removal ................................... 8-73
Wheel installation ............................... 8-75
Battery ................................................ 8-77
Replenishing the battery fluid ............. 8-81
Fuse replacement............................... 8-85
Replacing a headlight bulb ................. 8-87
Headlight beam adjustment................ 8-95
Tail/brake light bulb replacement ....... 8-97
Troubleshooting.................................. 8-99
Troubleshooting chart....................... 8-101
CLEANING AND STORAGE ................... 9-1
A. Cleaning ........................................... 9-1
B. Storage ............................................ 9-7
SPECIFICATIONS ................................. 10-1
CONVERSION TABLE .......................... 11-1
91011U5NF62.book Page 3 Wednesday, May 8, 2002 1:40 PM

8-87 1. Bolt (× 3)
1. Boulon (× 3)
1. Perno (× 3)
1. Headlight coupler (× 2)
1. Coupleur de phare (× 2)
1. Acoplador del faro (× 2)
EBU01243
Replacing a headlight bulb
If a headlight bulb burns out, replace it as follows.
1. Remove the headlight assembly by removing
the bolts.
2. Disconnect the headlight couplers.
U5NF62.book Page 87 Wednesday, May 8, 2002 1:40 PM

8-91 1. Headlight bulb holder cover
1. Cache de la fixation d’ampoule
1. Cubierta del portabombillas del faro
1. Headlight bulb holder
1. Fixation d’ampoule
1. Portabombillas del faro
5. Remove the headlight bulb holder cover.
6. Turn the headlight bulb holder counterclock-
wise and remove the defective bulb.
WARNING
_ A headlight bulb is hot when it is on and imme-
diately after it is turned off. Wait for the bulb to
cool before touching or removing it. You can
be burned, or a fire could start if the bulb
touches something flammable. _
U5NF62.book Page 91 Wednesday, May 8, 2002 1:40 PM

8-93 1. Headlight bulb holder cover
2. Headlight bulb holder
1. Cache de la fixation d’ampoule
2. Fixation d’ampoule
1. Cubierta del portabombillas del faro
2. Portabombillas del faro
7. Put a new headlight bulb into position and se-
cure it in place with the bulb holder.CAUTION:_ Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner. _8. Install the headlight bulb holder cover.CAUTION:_ Make sure the headlight bulb holder cover is
securely fitted over the bulb holder. _9. Install the headlight unit cover by installing
the screw.
10. Install the headlight unit by installing the bolt.
11. Connect the headlight couplers.
12. Install the headlight unit assembly by install-
ing the bolts.
13. Adjust the headlight beam if necessary.
U5NF62.book Page 93 Wednesday, May 8, 2002 1:40 PM

10-5
Shock absorber:
Front
RearCoil spring / oil damper
Coil spring / gas-oil damper
Wheel travel:
Front
Rear200 mm
200 mm
Electrical:
Ignition system
Generator system
Battery type/voltage, capacityD.C. C.D.I.
A.C. magneto
GM12CZ-4A-2/12V, 12Ah
Headlight type: Krypton bulb
Bulb voltage, wattage
× quantity:
Headlight
Tail/brake light
Indicator light:
Neutral
Reverse12V, 30W/30W
× 2
12V, 5W/21W
× 1
12V, 3.4W
× 1
12V, 3.4W
× 1
Fuse: 15AMODEL YFM350X
U5NF62.book Page 5 Wednesday, May 8, 2002 1:40 PM