2003 TOYOTA MR2 SPYDER trunk

[x] Cancel search: trunk

Page 16 of 265

TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual 72003 MR2 from Aug. ’03 Prod. (OM17511U)
OPERATION OF INSTRUMENTS AND
CONTROLS
Keys and Doors
Keys8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .\
 . . . . . . . . . . .

Page 24 of 265

TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual 152003 MR2 from Aug. ’03 Prod. (OM17511U)
Trunk lid—
SB12043
To open the trunk lid:1. Open the glove box door, and then pull the trunk lid lock release lever.
The trunk lid will spring up slightly

Page 25 of 265

TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual 162003 MR2 from Aug. ’03 Prod. (OM17511U)
CAUTION
After inserting the support rod into
the slot, make sure the rod sup-
ports the trunk lid securely from
falling down on to your head or
body.
Befo

Page 132 of 265

TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual 1232003 MR2 from Aug. ’03 Prod. (OM17511U)
ASHTRAY
To use the ashtray, pull out the lid.
When finished with your cigarette, thor-
oughly extinguish it in the ashtray  to pre-
vent other cigarette bu

Page 133 of 265

TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual 1242003 MR2 from Aug. ’03 Prod. (OM17511U)
SB19031a
2. Fix the cover by hitching the inside clipon the hood.
NOTICE
Do not place valuables in the front
box to prevent robbery.
 Do not place anythi

Page 145 of 265

TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual 1362003 MR2 from Aug. ’03 Prod. (OM17511U)
CAUTION
Do not pump the brake pedal if the
engine stalls. Each push on the
pedal uses up your  reserved vacu-
um.
Even if the power assist is com-
pletel

Page 179 of 265

TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual 1702003 MR2 from Aug. ’03 Prod. (OM17511U)
SB41047
To remove the spare tire:1. Open the front box cover in the trunk.
SB41061a
2. Remove the spare wheel cover.
SB41063b
3. Loosen the bolt and remove

Page 203 of 265

TOYOTA MR2 SPYDER 2003 W30 / 3.G Owners Manual 1942003 MR2 from Aug. ’03 Prod. (OM17511U)
Power steering fluid level
Check the level through the reservoir. The
level should be in the “HOT” or “COLD”
range depending on the fluid temperatu
Page:   1-8 9-16 17-24 next >