Page 368 of 2234
B16534Push
B16535Pull
11±32
±
FUELFUEL SYSTEM(1AZ±FSE)
AVENSIS REPAIR MANUAL (RM1018E)
(d)Observe these precautions when connecting the fuel tube connectors (Quick Type):
(1)Check that there is no damage or foreign objects inthe connected part of the pipe.
(2)Match the axis of the connector with the axis of the pipe, and push into the connector until the connec-
tor makes a ºclickº sound. If the connection is tight,
apply little amount of fresh engine oil on the tip of the
pipe.
(3)After having finished the connection, check if the pipe and the connector are securely connected by
pulling on them.
(4)Check for fuel leaks.
4.CHECK FOR FUEL LEAKS
(a)Check that there are no fuel leaks after doing maintenance anywhere on t\
he fuel system. (See page 11±33)
http://vnx.su
Page 372 of 2234
110UF±01
A63024
A60575
Quick Connector
O±ring Nylon Tube
Tube Joint Clip
Fuel Suction Plate
A63025
11±104
±
FUELFUEL TANK ASSY(DIESEL)
AVENSIS REPAIR MANUAL (RM1018E)
Removal & Installation and Disassembly & Reassembly
1.REMOVE REAR SEAT CUSHION ASSY (See page 72±27)
2. REMOVE REAR FLOOR SERVICE HOLE COVER
(a) Remove the 4 screws and the rear floor service hole cover.
(b) Disconnect the connector. 3. DISCONNECT FUEL TANK RETURN TUBE
(a) Remove the tube joint clip and pull out the fuel tank returntube.
NOTICE:
Check if there is any dirt or mud around the connector
before this operation and remove the dirt as neces-
sary.
Be careful of mud because the quick connector has
an O±ring which seals the pipe and the connector that
can be contaminated.
Do not use any tool in this operation.
Do not bend or twist the nylon tube.
Keep the plug free of foreign objects.
To protect the tube, cover it with a vinyl or a plastic
bag after checking.
4. DISCONNECT FUEL TANK MAIN TUBE SUB±ASSY
(a) Pinch the tube connector then pull out the fuel tank main tube.
NOTICE:
Check if there is any dirt or mud around the connector
before this operation and remove the dirt as neces-
sary.
Be careful of mud because the quick connector has
an O±ring which seals the pipe and the connector that
can be contaminated.
Do not use any tool in this operation.
Do not bend or twist the nylon tube.
To protect the tube, cover it with a vinyl or a plastic
bag after checking.
When the connector and the pipe are stuck, push and
pull the connector to release. Pull out the connector
from the pipe carefully.
http://vnx.su
Page 373 of 2234
A63026
A60576
Fuel Tube
Connector Clip
Nylon Tube
O±ring Pipe
A62989
SST
A77883
±
FUELFUEL TANK ASSY(DIESEL)
11±105
AVENSIS REPAIR MANUAL (RM1018E)
5.DISC ONNECT FUEL EVAPOR ATION TUBE
SUB±ASSY NO.2
(a)Pinch the quick connector then pull out the fuel evapora-
tion tube sub±assy No. 2.
NOTICE:
Check if there is any dirt or mud around the connector
before this operation and remove the dirt as neces-
sary.
Be careful of mud because the quick connector has
an O±ring which seals the pipe and the connector that
can be contaminated.
Do not use any tool in this operation.
Do not bend or twist the nylon tube.
To protect the tube, cover it with a vinyl or a plastic
bag after checking.
When the connector and the pipe are stuck, push and
pull the connector to release. Pull out the connector
from the pipe carefully.
6.REMOVE FUEL AND EVAPOR ATION VENT TUBE
SUB±ASSY
(a)Using SST, loosen the retainer. SST09808±14010
(b)Remove the retainer.
(c)Pull out the fuel pump assembly.
CAUTION:
Be careful that the arm of the sender gauge should not
bent.
7.DRAIN FUEL
8.REMOVE FLOOR PANEL BRACE FRONT (See page 15±10)
9.REMOVE EXHAUST PIPE ASSY FRONT (See page 15±10)
10. REMOVE FUEL TANK PROTECTOR NO.1
(a) Remove the 4 bolts and the fuel tank protector.
http://vnx.su
Page 375 of 2234
A81588
31
22
A63387
Retainer
Fuel Tube Connector
O±ring
Pipe
A77890
A77894
A78270
±
FUEL FUEL TANK ASSY (DIESEL)
11±107
AVENSIS REPAIR MANUAL (RM1018E)
16. DISCONNECT FUEL TANK MAIN TUBE SUB±ASSY
(a) Pinch the tab of the retainer to remove the lock claws and
pull down it as shown in the illustration.
(b) Pull out the fuel tank main tube.
NOTICE:
Check if there is any dirt or mud around the connector
before this operation and remove the dirt as neces-
sary.
Be careful of mud because the quick connector has
an O±ring which seals the pipe and the connector that
can be contaminated.
Do not use any tool in this operation.
Do not bend or twist the nylon tube. Protect the con-
nector by covering it with a vinyl or a plastic bag.
When the pipe and connector are stuck, push and pull
the connector to release. Pull out the connector from
the pipe carefully.
17. REMOVE FUEL TANK ASSY
(a) Set up a transmission jack under the fuel tank.
(b) Remove the 4 bolts and 2 fuel tank bands, and then re- move the fuel tank.
18. REMOVE FUEL TANK MAIN TUBE SUB±ASSY
(a) Unfasten the 5 claws, and remove the fuel tank return tube from the fuel tank.
19. REMOVE FUEL EVAPORATION TUBE SUB±ASSY NO.2
(a) Unfasten the claw, and remove the fuel evaporation tube
from the fuel tank.
http://vnx.su
Page 376 of 2234
A77892
A77893
UpperFuel Tank
Rear
Hose Clamp
A81618
11±108
±
FUELFUEL TANK ASSY(DIESEL)
AVENSIS REPAIR MANUAL (RM1018E)
20.REMOVE FUEL TANK MAIN TUBE SUB±ASSY
(a)Unfasten the 4 claws, and remove the fuel tank main tube from the fuel tank.
21.INSTALL FUEL TANK MAIN TUBE SUB±ASSY
22.INSTALL FUEL EVAPOR ATION TUBE SUB±ASSY
NO.2
(a)Install the hose clamp as shown in the illustration.
23.INSTALL FUEL TANK RETURN TUBE
24.INSTALL FUEL TANK ASSY Torque: 40 N m (400 kgfcm, 29 ftlbf)
25.CONNECT FUEL TANK MAIN TUBE SUB±ASSY
(a)Push in the fuel tube connector to the pipe, and push upretainer to lock the claws.
NOTICE:
Check if there is any damage or foreign objects on the connected part.
After connecting, check if the quick connector and the pipe are securely\
connected by pulling
on them.
26.CONNECT FUEL TANK RETURN TUBE
27.CONNECT FUEL TANK TO FILLER PIPE HOSE
28.CONNECT BREATHER TUBE FUEL HOSE
29.INSTALL PARKING BRAKE CABLE ASSY NO.3 Torque: 5.4 N m (55 kgfcm, 48 in. lbf)
30.INSTALL PARKING BRAKE CABLE ASSY NO.2 Torque: 5.4 N m (55 kgfcm, 48 in. lbf)
31.INSTALL FUEL TANK PROTECTOR NO.1
Torque: 5.4 N m (55 kgfcm, 48 in. lbf)
32.INSTALL EXHAUST PIPE ASSY FRONT (See page 15±10)
33. ADD FUEL
http://vnx.su
Page 377 of 2234
A63379
Mark
A62989
SST
A63380
Area
Arrow
Mark
A64697
A64698
±
FUEL FUEL TANK ASSY (DIESEL)
11±109
AVENSIS REPAIR MANUAL (RM1018E)
34. INSTALL FUEL AND EVAPORATION VENT TUBE
SUB±ASSY
(a) Align the arrow marks of the fuel pump bracket and the
fuel tank.
(b) Temporarily install the retainer.
(c) Mount SST to the retainer. SST 09808±14010
(d) Tighten the retainer until the arrow mark located on the re- tainer is positioned within the area shown in the illustra-
tion.
(e) Check that the arrow marks of the fuel pump bracket and fuel tank are aligned.
35. CONNECT FUEL EVAPORATION TUBE SUB±ASSY NO.2
(a) Push in the quick connector to the pipe until connector makes ºclickº sound.
NOTICE:
Check if there is any damage or foreign objects on the
connected part of the pipe.
After connecting, check if the pipe and the connector
are securely connected by pulling on them.
36. CONNECT FUEL TANK MAIN TUBE SUB±ASSY
(a) Push in the quick connector to the pipe until connector makes ºclickº sound.
NOTICE:
Check if there is any damage or foreign objects on the
connected part of the pipe.
After connecting, check if the pipe and the connector
are securely connected by pulling on them.
http://vnx.su
Page 378 of 2234
A64699
11±110
±
FUELFUEL TANK ASSY(DIESEL)
AVENSIS REPAIR MANUAL (RM1018E)
37.CONNECT FUEL TANK RETURN TUBE
(a)Connect the fuel tank return tube with the tube joint clip.
NOTICE:
Check that there is no scratch or foreign objects on
the connecting parts.
Check that the connector is inserted securely.
Check that the clip of the tube joint is on the collar of
the connector.
After installing the tube joint clip, check that the con-
nector is not pulled off.
38.CHECK FOR FUEL LEAKS (See page 11±60)
39. CHECK FOR EXHAUST GAS LEAKS
40.INSTALL FLOOR PANEL BRACE FRONT (See page 15±10)
41. INSTALL REAR FLOOR SERVICE HOLE COVER
42.INSTALL REAR SEAT CUSHION ASSY (See page 72±27)
http://vnx.su
Page 387 of 2234
A77888
1
2
3
Retainer
Pinch
Pinch
2
A63387
RetainerPipe
O±ring
Fuel Tube Connector
A77889
2
Pinch1
Pinch1
A60576
Nylon Tube
Pipe
O±ring Fuel Tube
Connector Clip
Fuel Tube
Connector
A77890
±
FUEL FUEL TANK ASSY (GASOLINE)
11±97
AVENSIS REPAIR MANUAL (RM1018E)
19. DISCONNECT FUEL TANK MAIN TUBE SUB±ASSY
(a) Pinch the tab of the retainer to remove the lock claws and
pull down it as shown in the illustration.
(b) Pull out the fuel tank main tube.
NOTICE:
Check if there is any dirt or mud around the connector
before this operation and remove the dirt as neces-
sary.
Be careful of mud because the quick connector has
an O±ring which seals the pipe and the connector that
can be contaminated.
Do not use any tool in this operation.
Do not bend or twist the nylon tube. Protect the con-
nector by covering it with a vinyl or plastic bag.
When the pipe and connector are stuck, push and pull
the connector to release. Pull out the connector from
the pipe.
20. DISCONNECT FUEL EVAPORATION TUBE SUB±ASSY NO.2
(a) Pinch the fuel tube connector clip and pull out the fuel evaporation tube.
NOTICE:
Check if there is any dirt or mud around the connector
before this operation and remove the dirt as neces-
sary.
Be careful of mud because the quick connector has
an O±ring which seals the pipe and the connector that
can be contaminated.
Do not use any tool in this operation.
Do not bend or twist the nylon tube. Protect the con-
nector by covering it with a vinyl or plastic bag.
When the pipe and connector are stuck, push and pull
the connector to release. Pull out the connector from
the pipe.
21. REMOVE FUEL TANK ASSY
(a) Set a transmission jack to the fuel tank.
(b) Remove the 4 bolts and the 2 fuel tank bands, and then remove the fuel tank.
http://vnx.su
