2003 Peugeot 307 CC tow

22-09-2003
102104
6YOUR 307 CC AT A GLANCE
Front and rear lights (ring A)Lights off. Side lights.
Dipped/main beam headlamps. Automatic switching onof the lights.
Automatic switchingon of the lights
To activate or deactivate the function, place the key in theaccessories position, the lightsstalk in position 0and press the
end of the lights stalk for morethan four seconds. WINDSCREEN WIPERS
2 Rapid wipe(heavy rain).
1 Normal wipe(moderate rain).
I Intermittent wipe.
or
AUTO Automatic wipe.
0 Off.


Single wipe.
Windscreen wash-wipe: pull the stalk towards you. Automatic wipe In the AUTO position, the wiper
operates automatically and adjusts its speed to the intensityof the rainfall.
Front fog lamps/Rearfog lamp (ring B)
Front fog lamps (first rota-tion of the ring forwards)
Front fog lampsand rear fog lamp(second rotation ofthe ring forwards)
Switching off: rotation of the ringbackwards.
STEERING WHEEL STALKS LIGHTING

22-09-2003
11 7
Moving Off With the engine running, to move
off from position P:
 It is essential to press the
brake pedal to exit position P,
 Select the function R, D or M,
then gradually release thepressure on the brake pedal;
the vehicle will move off
immediately.
You can also move off fromposition N:
 Release the handbrake, withyour foot on the brake.
 Select function R, D or M,
then gradually release thepressure on the brake pedal;
the vehicle will move off
immediately.
When the engine is idlingwith the brakes notapplied, if function R, D
or Mis selected, the vehi-
cle moves without the acceleratorbeing pressed. For this reason, do not
leave children unsuper- vised inside the vehicle,with the engine running .
14
YOUR 307 CC AT A GLANCE
AUTOMATIC GEARBOX 'PORSCHE TIPTRONIC SYSTEM'
The four-speed
automaticgearbox offers a choice between the comfort
of automatic integral regulation enhanced by a sportand snow pro-
gramme , or the pleasure of manual gear changing .
Gear selection gate  Move the lever in the gate to select one of the functions.
Once the function is selected, the indicator light for that function is displayed on the instrument panel screen.
S:sport programme.


:snow programme.
P ark :to immobilise the vehicle or to start the
engine , with the handbrake on or off.
R everse :to reverse (select this function with the
vehicle stationary and the engine at idle). N eutral :to start the engine or to park, with the
handbrake on.Note: if position Nis engaged by mistake while
the car is moving, allow the engine to return to idling speed before engaging function Dto
accelerate. D rive :for automatic gear changing.
M anual :for manual gear changing.
To change the four gearsmanually:
 Push the lever to the +symbol to change up a gear and pull the lever
towards the Ðsymbol to change down a gear.
Note: the S(sport) and

(snow) programmes do not operate when in
manual mode.

22-09-2003
PEUGEOT SERVICING19
SPECIAL FEATURES Some of your vehicle's vital components have specific servicing schedules. The brake fluid must be replaced every every 40,000 miles (60,000 km) or every 2 years.
The passenger compartment filter must be checked at each visitto the PEUGEOT dealer (intermediate visits and regu-
lar services).The timing belt: contact a PEUGEOT dealer.
Arduous conditions of use If the vehicle is used under certain particularly arduous conditions: Ð Continuous door-to-door use.
Ð Town use.
Ð Repeated short journeys, with the engine cold in low temperatures.
Or prolonged stay under the following conditions: Ð Countries with temperatures often above +30 ¡C.
Ð Countries with temperatures often below minus 15 ¡C.
Ð Countries with a dusty atmosphere.
Ð Countries whose lubricants or fuels do not conform to our recommendations.
It is necessary to follow an "Arduous conditions" service schedule which includes: Ð shorter service intervals:¥ Every 10,000 miles (15,000 km) or every year for the 2 litre 180 bhp engine vehicles. ¥ Every 12,000 miles (20,000 km) or every year for the 1.6 litre and 2 litre engine vehicles.
Ð special operations: ¥ Replacement of the air filter every 10,000 miles (15,000 km) for the 2 litre 180 bhp engine vehicles.

22-09-2003
PEUGEOT SERVICING19
SPECIAL FEATURES Some of your vehicle's vital components have specific servicing schedules. The brake fluid must be replaced every every 40,000 miles (60,000 km) or every 2 years.
The passenger compartment filter must be checked at each visitto the PEUGEOT dealer (intermediate visits and regu-
lar services).The timing belt: contact a PEUGEOT dealer.
Arduous conditions of use If the vehicle is used under certain particularly arduous conditions: Ð Continuous door-to-door use.
Ð Town use.
Ð Repeated short journeys, with the engine cold in low temperatures.
Or prolonged stay under the following conditions: Ð Countries with temperatures often above +30 ¡C.
Ð Countries with temperatures often below minus 15 ¡C.
Ð Countries with a dusty atmosphere.
Ð Countries whose lubricants or fuels do not conform to our recommendations.
It is necessary to follow an "Arduous conditions" service schedule which includes: Ð shorter service intervals:¥ Every 10,000 miles (15,000 km) or every year for the 2 litre 180 bhp engine vehicles. ¥ Every 12,000 miles (20,000 km) or every year for the 1.6 litre and 2 litre engine vehicles.
Ð special operations: ¥ Replacement of the air filter every 10,000 miles (15,000 km) for the 2 litre 180 bhp engine vehicles.

22-09-2003
YOUR 307 CC IN DETAIL73
The main
"Navigation - Guidance"
menu offers various options for acti- vation or management of guidance:
Ð choice of the type of destination address (entering of address, ser- vice, GPS co-ordinates, storedaddress),
Ð modification to the initial route (entering of a diversion),
Ð displaying of the chosen destination,
Ð setting of the guidance option parameters,
Ð stop or resume guidance (display- ing of the message which changes depending on the previous status).
Navigation - GuidanceThe
"Select a destination" menu
offers various options for reaching a destination:
¥ entering a postal address,
¥ selecting a service available in a town (town hall, hotel, cinema, air- port...),
¥ entering GPS details,
¥ selecting a destination stored in the directory,
¥ selecting one of the last ten desti- nations.
Selecting a destinationThe last guidance address is dis- played. Select and validate in succession the entry zones
"Town", "Street" , then
"N¡" to fill them in.
The "OK" function permits validation
of the address and access to theguidance activation function. The "Archive" function permits
recording of the address in a directory file. The "Current location" function
permits display of the current address.
Entering an address

22-09-2003
YOUR 307 CC IN DETAIL
74
To enter the name of a town, select each letter by turning the dial, thenvalidate each letter by pressing thedial. If an error is made entering the let- ters, the
"Correct" function permits
erasing of the last letter entered. Note: following the validation of a
letter, only those which could make up a name existing in the database
appear. As letters are entered, the "List"
function indicates the number of towns beginning with the same let-
ters. Activation of this function per-mits selection of a town from the list. When the list contains fewer than fivenames, these are displayed automati-
cally. Select a town then validate bypressing the dial. When the complete name of the town is displayed, select the
"OK"
function then confirm by pressing thedial. Note: once the town has been
entered, you can confirm by pressing "OK" . You will then be guided to the
centre of this town automatically. Entering the name of the street Enter the name of the street in the same way as the name of the town. When the full name of the street is displayed, select the "OK" function
then confirm by pressing the dial. Entering the town and street using the alphanumeric keypad Press the numeric key which corre- sponds to the letter required until theletter appears on the screen, thenconfirm by pressing the #key after
each letter.
Entering the name of the townEnter the number of the street pre- viously entered. Select the
"OK" function, then con-
firm by pressing the dial.Note: if the number of the street
entered is not available, it is rejected.
You can also select a street from the "Junctions" function, which avoids
having to enter the street number. Note: if the street selected does not
have a number, the list of junctions is
displayed automatically. The full destination is displayed. Select the "OK" function, thenconfirm by pressing the dial toaccess the guidance activationfunction. Follow the instructionsgiven by the system.
Entering the number of the streetor junction

YOUR 307 CC IN DETAIL75
The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
Ð accept the last details input by
means of the "OK"function,
Ð input the details of your destina- tion,
Ð automatically input the details of your current location by means of the "Current location" function.
GPS details
The last address entered is dis- played. There are three options for defining the location in which you wish toobtain this service:
Ð accept the last address entered
using the "OK"function,
Ð fill in the "Town"and "Street" zones,Ð automatically enter the name of
your current location using the "Current location" function.
Selecting a service If you wish to be directed to a ser- vice, select the
categorycorre-
sponding to the service, then confirmby pressing the dial. The list of services corresponding to the category selected is displayed. Select the servicethen confirm by
pressing the dial to access the "Place choice" function.
An indication on the edge of the screen (x/n) shows you the maxi-mum number of establishments pro-viding the same service within aradius of 30 miles (50 km), as thecrow flies, from the selected location. Use buttons "<"and ">" to consult
the list provided.When the establishment of your choice is displayed, you can:
¥ select the "OK"function to acti-
vate guidance towards this service,
¥ select the "Archive"function to enter
this establishment in your directory.
Note: if the service selected is not
available in the programmed loca- tion, a temporary message informsyou of this. Following validation of the location, the service closest to it is displayed.The distance indicated is the dis-tance as the crow flies from the ser-vice to the selected location.
22-09-2003

22-09-2003
YOUR 307 CC IN DETAIL79
This mode permits:
Ð selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
Ð lateral movement on the map by means of the four directionalarrows, representing the four cardi-nal points (North, East, South,
West),
Ð zooming in on the map in accor- dance with the eleven preset levels,
Ð displaying of the "Map"contextual
menu.
"Selection - Movement on map"mode
From the general menu , the main
"Map" menu offers various options
for guidance management:
Ð switching to "Selection - Movement on map" mode,
Ð direction of the map towards the North or in the direction of the vehicle,
Ð recentering of the map around the vehicle,
Ð opening of the services selection window visible on the map, suchas hotels, service stations, etc.
Ð displaying of the window for enter- ing the description for recordingthe current position of the vehiclein a directory file.
Map*The contextual menu associated with the
"Map"application and with
the "Selection-Movement on map"
mode appears as a superimposed
display, when these are in use in the
main screen window. This menu is limited to the following functions:
Ð displaying of the information on the location selected on the map,
Ð selection of a location on the map as a destination,
Ð storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
Ð switching to "Vehicle following on map" mode.
* DT colour screen only.
"Map" contextual menu