2003 NISSAN X-TRAIL headrest

FRONT SEAT
SE-27
C
D
E
F
G
H
J
K
L
MA
B
SE

3. Remove nuts, and remove inner cross fixed stay.
4. Pull snap ring upward, and remove lumber support lever knob
front seatback frame (for driver seat).
5. Pick up and push up the headrest holder tab to remove.
NOTE:
Before installing the headrest holder, check its front, rear, right
and left orientation for correct installation.
6. After removing seatback trim & pad, remove hog rings to separate pad and trim.
Assembly
Assemble in the reverse order of disassembly.
Removal of Seatback Assembly
To remove seatback assembly, follow steps 1 - 2. After that, remove side air bag connector and bolts.
NOTE:
When assembling the seatback frame, make sure that the reclining device are locked on both sides, and be
sure to temporarily tighten the bolts and make sure that the seatback frame is not warped, then tighten them
finally.
Installation of Seatback Assembly
Install in the reverse order of removal.
PIIA0546E
PIIA1156E
PIIA0167E

SE-28
FRONT SEAT

SEATBACK TRIM [WITHOUT SIDE AIR BAG (EXCEPT GENUINE LEATHER SEAT)]
Disassembly
1. Disengage retainers in the lower part at the back of seatback.
2. Pull off seatback trim.
3. Pull snap ring upward, and remove lumber support lever knob
front seatback frame (for driver seat).
4. Pick up and push up the headrest holder tab to remove.
NOTE:
Before installing the headrest holder, check its front, rear, right
and left orientation for correct installation.
5. Remove seatback trim.
Assembly
Assemble in the reverse order of disassembly.
Removal of Seatback Assembly
To remove seatback assembly, follow steps 1 - 2. After that, remove bolts.
PIIA0547E
SIIA0248E
PIIA1156E
PIIA0167E

REAR SEAT
SE-31
C
D
E
F
G
H
J
K
L
MA
B
SE

REAR SEATPFP:88300
Component Parts DrawingEIS000NR
STANDARD SEAT
PIIB0399E
1. Seatback board 2. Clip (C101) 3. TORX bolt
4. Inner hinge cover 5. Bolt 6. Seat lock
7. Seatback frame 8. Seatback pad 9. Seatback lock knob
10. Seatback lock knob finisher 11. Headrest 12. Headrest holder (free)
13. Headrest holder (locked) 14. Seatback trim 15. Screw
16. Seat lock protector 17. Rear back side bracket 18. Seat cushion lock
19. Seat cushion trim 20. Seat cushion pad 21. Seat cushion stay
22. Side hinge cover

SE-32
REAR SEAT

SEAT WITH ARMREST
PIIB0400E
1. Seatback board finisher 2. Inner hinge cover 3. Screw
4. Seatback board 5. Clip (C101) 6. Seatback knob
7. Seatback knob finisher 8. Headrest 9. Headrest holder (free)
10. Headrest holder (locked) 11. Seatback pad 12. TORX bolt
13. Seat lock 14. Bolt 15. Seatback frame
16. Armrest bracket cover (RH) 17. Clip 18. Tonneau cover hook
19. Anchor bolt 20. Retractor cover 21. Seat belt (center)
22. Armrest 23. Armrest lid board 24. Seatback trim
25. Seat belt escutcheon 26. Seatback side bracket 27. Seat lock protector
28. Seat cushion pad 29. Seat cushion stay 30. Armrest bracket cover (LH)
31. Seat cushion lock 32. Side hinge cover 33. Seat cushion trim