2003 MERCEDES-BENZ ML350 Direction

Contents
Loading.............................................. 139
Loading instructions..................... 139
Partition net* ............................... 141
Cargo area cover blind* ............... 143
Cargo floor plates ........................ 144
Roof rack*.................................... 145
Driving systems ................................. 146
Cruise control .............................. 146
Parktronic system*
(Parking assist) ............................ 149
Useful features .................................. 152
Interior storage spaces ................ 152
Cup holders.................................. 154
Armrest in rear seat bench .......... 155
Ashtrays and cigarette lighter ...... 156
Electrical outlet ............................ 158
Telephone* .................................. 158
Tele Aid* ...................................... 159
Garage door opener ..................... 168
Trip computer*............................. 172Operation......................................... 177
The first 1000 miles (1500 km) ......... 178
Driving instructions............................ 179
Drive sensibly – save fuel............. 179Drinking and driving ...................... 179
Pedals ........................................... 179
Power assistance .......................... 179
Brakes........................................... 180
Driving off ..................................... 181
Parking.......................................... 182
Tires .............................................. 182
Hydroplaning................................. 183
Tire traction .................................. 183
Tire speed rating ........................... 184
Winter driving instructions ............ 184
Standing water.............................. 185
Off-road driving ............................. 186
Trailer towing ................................ 192
Passenger compartment ............... 196
Driving abroad .............................. 197
Control and operation of radio
transmitters .................................. 197
Catalytic converter........................ 198
Emission control ........................... 198
Coolant temperature..................... 199
At the gas station ............................... 200
Check regularly and
before a long trip .......................... 201Engine compartment .......................... 202
Hood ............................................. 202
Engine oil ...................................... 203
Transmission fluid level ................ 206
Coolant ......................................... 206
Battery .......................................... 207
Windshield washer system and
headlamp cleaning system ........... 208
Tires and wheels ................................ 209
Important guidelines ..................... 209
Life of tire ..................................... 210
Direction of rotation ..................... 210
Checking tire inflation pressure .... 211
Rotating wheels ............................ 212
Winter driving ..................................... 213
Winter tires ................................... 213
Block heater (Canada only) ........... 214
Snow chains ................................. 214
Maintenance ...................................... 215
Clearing the service indicator ....... 215
Service term exceeded ................. 215
Calling up the service indicator .... 216
Resetting the service indicator ..... 216
Vehicle care ....................................... 217
Cleaning and care
of the vehicle ................................ 217

37 Getting started
Adjusting
Seat fore and aft adjustment
Press the switch forward or backward
in the direction of arrow2 until you can
comfortably press the pedals all the
way to the floor.
Seat cushion tilt

Press the switch up or down in the di-
rection of arrow3 until your upper legs
are lightly supported.
Backrest tilt

Press the switch forward or backward
in the direction of arrow4 until your
hands are slightly angled when holding
the steering wheel. Head restraint height

Pull up or push down on head restraint
until it is in desired position.
Head restraint tilt

Manually adjust the angle of the head
restraint. Push or pull on the lower
edge of the head restraint cushion.
More information can be found in the
“Controls in detail” section (
page 91).
Steering wheel
1Lever
iWith the front door open, the seats can
still be adjusted approx. 30 minutes af-
ter the ignition has been turned off.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Warning!
G
Do not adjust the steering wheel while driv-
ing. The steering wheel must be locked
while driving. Adjusting the steering wheel
while driving, or driving without the steering
column locked could cause the driver to lose
control of the vehicle.

47 Getting started
Driving
High beam
Push the exterior lamp switch forward.
The high beam symbol
A
in the
instrument cluster lights up.
More information can be found in the
“Controls in detail” section (
page 102)
Turn signals
The combination switch is on the left of the
steering column.Combination switch1Turn signals, right
2Turn signals, left

Press the combination switch up1 or
down2.
The switch is automatically cancelled
when the steering wheel is turned to a
large enough degree.
Windshield wipers
The combination switch is on the right of
the steering column.Wiper switch0Windshield wipers off
1Intermittent wiping
2Normal wiper speed
3Fast wiper speed
4Wiping with windshield wiper fluid
iTo signal minor directional changes,
move combination switch to point of
resistance only and release. The turn
signal blinks three times.

48 Getting startedDrivingSwitching on windshield wipers
Make sure that the ignition is switched
on.

Turn the wiper switch to the desired po-
sition 1, 2 or 3, depending on the inten-
sity of the rain.
Single wipe

Press switch briefly in the direction of
arrow2.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid

Pull and hold wiper switch in direction
of arrow4.
The windshield wiper operates with
washer fluid.
More information on windshield wipers can
be found in the “Controls in detail” section
(
page 122).
Rear window wiper
The button is on the upper part on the cen-
ter console.
1Intermittent wiping
2Indicator lamp
3Wiping with washer fluidSwitching on intermittent wiping
Make sure that the ignition is switched on.

Press upper half1 of the button.
Switching off intermittent wiping

Press upper half1 of the button again.
Wiping with washer fluid

Press and hold lower half3 of the but-
ton.
After releasing the button the wiper op-
erates for additional five seconds.

93 Controls in detail
Seats
Rear seats
The rear seats are divided asymetrically.
To enlarge the cargo area you can adjust
the left and right part separately. The fol-
lowing changes are possible:

moving the seat fore and aft


folding down the backrest


lowering the seatAdjusting rear seat fore and aft
1Release lever

Pull release lever1 in direction of ar-
row.

Slide seat to the desired position until
it locks in place.Folding down the backrest
1Lock button

Close cup holder in rear center console
(page 155).

Move front seats forward. Manual seat
(page 35) or power seat (
page 37).

Slide seat forward.

Remove head restraint(s) (
page 92).

Pull lock button1 up and fold backrest
forward until it locks in place.
The red backrest lock indicator at lock
button1 is not visible in the locked po-
sition.
Warning!
G
Do not adjust the rear seats while driving.
Always seat in an upright position and the
seat belts are properly positioned on the
body. Your seat must be adjusted so that
you can correctly fasten your seat belt.
Adjust head restraint to support the back of
the head approximately at ear level.
Never place hands under the seat or near
any moving parts while a seat is being ad-
justed.
Warning!
G
Failure to assure that seats are locked into
place could result in an increased chance of
injury in an accident.

94 Controls in detailSeatsFolding up the backrest
Pull lock button1 up and unfold back-
rest until it locks in place.
Make sure that the seat belt is not
caught in the seat.

Check for secure locking by pulling and
pushing on the backrest.
The red backrest lock indicator at lock
button1 is not visible in the locked po-
sition.

Install head restraint (
page 92).

Slide seat rearward to desired position
(page 93).

Adjust front seats to desired position.
Manual seats (
page 35) and power
seats (
page 37). Lowering the rear seat
1Release button
2Lever
3Release lever

Close cup holder in rear center console
(page 155).

Move front seats forward. Manual seat
(page 35) or power seat (
page 37).

Press and hold release button1 to un-
lock lever2.

Pull lever2 in direction of arrow.

Pull release lever3 and push down rear
seat until it locks in place.

Fold down the backrest (
page 93).

Adjust front seats to desired position.
Manual seats (
page 35) and power
seats (
page 37).
Folding up the rear seat

Move front seats forward. Manual seat
(page 35) or power seat (
page 37).

Pull release lever3 and raise rear seat
until it locks in place.Warning!
G
Failure to assure that seats are locked into
place could result in an increased chance of
injury in an accident.

102 Controls in detailLighting
LightingFor notes on how to switch on the head-
lamps (
page 46) and use the turn signals
(
page 47), see the “Getting started” sec-
tion.
Combination switch
The combination switch is on the left of the
steering column.
1High beam
2High beam flasherM
Off
U
Automatic headlamp mode
C
Parking lamps, license plate lamps
and instrument panel lamps
Canada only: With the engine run-
ning, the low beam headlamps
additionally switched on.
õ
Low beam or high beam headlamps
ƒ
Left or right standing lamps (sym-
bol on underside of switch)Switching on high beams

Turn the switch to
õ
.

Push the exterior lamp switch forward.
The high beam symbol
A
in the
instrument cluster lights up.
High beam flasher

Pull the combination switch briefly in
direction2.
iIf you remove the key and open the
driver’s door while the parking lamps or
low beam headlamps are switched on,
then a warning sounds.

112 Controls in detailInstrument clusterResetting trip odometer
Press the left knob1 (
page 110) re-
peatedly until you see the trip odome-
ter display.

Press and hold the left knob1 until the
trip odometer is reset.
Tachometer
To help protect the engine, the fuel supply
is interrupted if the engine is operated
above its specified limit.
Outside temperature indicator
When moving the vehicle into colder ambi-
ent temperatures (e.g. when leaving your
garage), you will notice a delay before the
lower temperature is displayed.
A delay also occurs when ambient temper-
atures rise. This prevents inaccurate tem-
perature indications caused by heat
radiated from the engine during idling or
slow driving.
Setting the clock
Hour
Pull out the right knob2 in the instru-
ment cluster (
page 110) and turn it
counterclockwise.
Minutes

Pull out the right knob2 in the instru-
ment cluster (
page 110) and turn it
clockwise.
Warning!
G
The outside temperature indicator is not de-
signed to serve as an ice-warning device and
is therefore unsuitable for that purpose.
Indicated temperatures just above the freez-
ing point do not guarantee that the road sur-
face is free of ice. The road may still be icy,
especially in wooded areas or on bridges.
iTo set the clock by a single hour or a
few minutes, turn knob2 just a few de-
grees in the direction indicated for
hours or minutes.