2003 MERCEDES-BENZ CL600 engine

[x] Cancel search: engine

Page 242 of 384

MERCEDES-BENZ CL600 2003 C215 Owners Manual 242OperationEngine compartmentTransmission fluid level
The transmission fluid level does not need 
to be checked. If you notice transmission 
fluid loss or gear shifting malfunctions, 
have an authori

Page 243 of 384

MERCEDES-BENZ CL600 2003 C215 Owners Manual 243 Operation
Engine compartment
The coolant expansion tank is located on 
the passenger side of the engine compart-
ment.
1Coolant expansion tank
Using a rag, turn the cap slowly approx-
imately one

Page 244 of 384

MERCEDES-BENZ CL600 2003 C215 Owners Manual 244OperationEngine compartment
Batteries contain materials that can harm 
the environment if disposed of improperly. 
Recycling of batteries is the preferred 
method of disposal. Many states require

Page 245 of 384

MERCEDES-BENZ CL600 2003 C215 Owners Manual 245 Operation
Engine compartment
The windshield washer system on this ve-
hicle is heated, so a fluid mixture produced 
for temperatures of approximately 14°F 
(–10°C) should be sufficient.
1Washe

Page 252 of 384

MERCEDES-BENZ CL600 2003 C215 Owners Manual 252OperationWinter driving
Winter drivingBefore the onset of winter have your vehi-
cle winterized at an authorized 
Mercedes-Benz Center. This service in-
cludes:
Check of anticorrosion and antifree

Page 253 of 384

MERCEDES-BENZ CL600 2003 C215 Owners Manual 253 Operation
Winter driving
Block heater*
(Canada only)
The engine is equipped with a block heat-
er.
The electrical cable may be installed at 
your authorized Mercedes-Benz Center.
Snow chains
When

Page 254 of 384

MERCEDES-BENZ CL600 2003 C215 Owners Manual 254OperationMaintenance
MaintenanceWe strongly recommend that you have 
your vehicle serviced by your authorized 
Mercedes-Benz Center, in accordance with 
the Service Booklet at the times called for

Page 255 of 384

MERCEDES-BENZ CL600 2003 C215 Owners Manual 255 Operation
Maintenance
Calling up the service indicator
Switch on the ignition.
The standard display of the control sys-
tem appears (
page 117).

Press button 
k
 or 
j
 on the mul-
tifunction