2003 LINCOLN AVIATOR brake

[x] Cancel search: brake

Page 171 of 288

LINCOLN AVIATOR 2003  Owners Manual AdvanceTracenhances your vehicle’s stability during maneuvers that
require all available tire traction, like in wet/snowy/icy road conditions
and/or when performing emergency maneuvers. In an emerg

Page 172 of 288

LINCOLN AVIATOR 2003  Owners Manual indicator light in the instrument cluster remains on while the engine is
running, have the system serviced immediately.
Pressing the control once will disable the AdvanceTracstability
enhancement and

Page 174 of 288

LINCOLN AVIATOR 2003  Owners Manual Loaded vehicles, with a higher center of gravity, may handle
differently than unloaded vehicles. Extra precautions, such as
slower speeds and increased stopping distance, should be taken when
driving

Page 175 of 288

LINCOLN AVIATOR 2003  Owners Manual 3. Using the screwdriver (or
equivalent), push the white plastic
override mechanism (located behind
the bracket) toward the roof of the
vehicle as shown in the illustration.
4. Move the gearshift leve

Page 176 of 288

LINCOLN AVIATOR 2003  Owners Manual Driving with a 5–speed automatic transmission
Your transmission is equipped with an adaptive learning strategy found in
the vehicle computer. This feature is designed to increase durability, and
pro

Page 177 of 288

LINCOLN AVIATOR 2003  Owners Manual R (Reverse)
With the gearshift lever in R
(Reverse), the vehicle will move
backward. Always come to a
complete stop before shifting into
and out of R (Reverse).
N (Neutral)
With the gearshift lever in

Page 184 of 288

LINCOLN AVIATOR 2003  Owners Manual You should either know the terrain or examine maps of the area before
driving. Mapout your route before driving in the area. To maintain
steering and braking control of your vehicle, you must have all

Page 185 of 288

LINCOLN AVIATOR 2003  Owners Manual Do not rock the vehicle for more than a few minutes or damage
to the transmission and tires may occur or the engine may
overheat.
Always set the parking brake fully and make sure the gearshift is
latc