2003 Hyundai H-1 (Grand Starex) Automatic

2-11
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C150A01P-GATTURN SIGNAL SWITCH
TURN SIGNAL SWITCH TURN SIGNAL SWITCH
TURN SIGNAL SWITCH
TURN SIGNAL SWITCH
C140A01P-GAT
MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH
Pulling down on the lever causes the turn
signals on the left side of the car to blink. Pushing upward on the lever causes the turnsignals on the right side of the car to blink. Asthe turn is completed, the lever will automati-cally return to the center position and turn offthe turn signals at the same time. If either turnsignal indicator light blinks more rapidly thanusual, goes on but does not blink, or does notgo on at all, there is a malfunction in thesystem. Check for a burned-out fuse or bulb orsee your Hyundai dealer.
Rotate the switch to turn on the lights.
1. Lights off
2. Position, tail, licence-plate, and instrument panel lamps on
3. Headlights on To operate the headlights, turn the barrel onthe end of the multifunction switch.
Parking light auto cut (If installed)
Parking light auto cut (If installed) Parking light auto cut (If installed)
Parking light auto cut (If installed)
Parking light auto cut (If installed)
If you do not turn the parking lights "OFF" after
driving, the parking light will automatically shut"OFF" when the driver's door is opened.
To turn them "ON" again you must simply turn
the ignition key to the "ON" position. C160A01P-GAT
HIGH-BEAM SWITCH
HIGH-BEAM SWITCH HIGH-BEAM SWITCH
HIGH-BEAM SWITCH
HIGH-BEAM SWITCH
To turn on the headlight high beams, push the
lever forward (away from you). The High BeamIndicator Light will come on at the same time.For low beams, pull the lever back toward you.
C170A01P-GATPASSING SWITCH
PASSING SWITCH PASSING SWITCH
PASSING SWITCH
PASSING SWITCH
HSR2114HSR2113HSR2112
1 2
3
HSR2115

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-12 The headlights will go on when the lever is
pulled toward you and will go off when it is released.
The headlights can be flashed even though the
headlight switch is in the "OFF" position.
C180A01P-GATWINDSHIELD WIPER AND WASHER
WINDSHIELD WIPER AND WASHER WINDSHIELD WIPER AND WASHER
WINDSHIELD WIPER AND WASHER
WINDSHIELD WIPER AND WASHER
SWITCH
SWITCH SWITCH
SWITCH
SWITCH
C180A01P-1 1
2
3
4
The windshield wiper and washer switch can
be operated with the ignition switch at the "ON" or "START position. Move the switch to operate the windshield
wipers or spray the washer fluid.
Windshield wipers
Windshield wipers Windshield wipers
Windshield wipers
Windshield wipers
1. Off
2. Intermittent wiper operation To use the intermittent wiper feature, place the wiper switch in the "INT" position. Withthe switch in this position, the interval be- tween wipers can be varied from 2 to 10seconds by turning the Interval AdjusterSwitch.
3. Low-Speed operation
4. High-Speed operation
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
(1)(1)
(1)(1)
(1) Before operating the wipers in cold
Before operating the wipers in cold Before operating the wipers in cold
Before operating the wipers in cold
Before operating the wipers in cold
weather, check to be sure that the wiper
weather, check to be sure that the wiper weather, check to be sure that the wiper
weather, check to be sure that the wiper
weather, check to be sure that the wiper
blades are not frozen to the windshield.
blades are not frozen to the windshield. blades are not frozen to the windshield.
blades are not frozen to the windshield.
blades are not frozen to the windshield.
Attempting to operate the wipers while
Attempting to operate the wipers while Attempting to operate the wipers while
Attempting to operate the wipers while
Attempting to operate the wipers while
the blades are frozen to the windshield
the blades are frozen to the windshield the blades are frozen to the windshield
the blades are frozen to the windshield
the blades are frozen to the windshield
could cause the motor to burn out.
could cause the motor to burn out. could cause the motor to burn out.
could cause the motor to burn out.
could cause the motor to burn out.
(2)(2)
(2)(2)
(2) If the wipers stop during operation be-
If the wipers stop during operation be- If the wipers stop during operation be-
If the wipers stop during operation be-
If the wipers stop during operation be-
cause of ice or some other obstruction
cause of ice or some other obstruction cause of ice or some other obstruction
cause of ice or some other obstruction
cause of ice or some other obstruction
on the windshield, the wiper motor could
on the windshield, the wiper motor could on the windshield, the wiper motor could
on the windshield, the wiper motor could
on the windshield, the wiper motor could
burn out even if the wiper switch is turned
burn out even if the wiper switch is turned burn out even if the wiper switch is turned
burn out even if the wiper switch is turned
burn out even if the wiper switch is turned
off. If this occurs, promptly stop the ve-
off. If this occurs, promptly stop the ve- off. If this occurs, promptly stop the ve-
off. If this occurs, promptly stop the ve-
off. If this occurs, promptly stop the ve-
hicle, turn off the ignition switch, and
hicle, turn off the ignition switch, and hicle, turn off the ignition switch, and
hicle, turn off the ignition switch, and
hicle, turn off the ignition switch, and
clean the windshield to allow proper wiper
clean the windshield to allow proper wiper clean the windshield to allow proper wiper
clean the windshield to allow proper wiper
clean the windshield to allow proper wiper
operation.
operation. operation.
operation.
operation.
(3)(3)
(3)(3)
(3) Do not use the wipers when the wind-
Do not use the wipers when the wind- Do not use the wipers when the wind-
Do not use the wipers when the wind-
Do not use the wipers when the wind-
shield is dry:doing so could scratch the
shield is dry:doing so could scratch the shield is dry:doing so could scratch the
shield is dry:doing so could scratch the
shield is dry:doing so could scratch the
windshield and wear the blades prema-
windshield and wear the blades prema- windshield and wear the blades prema-
windshield and wear the blades prema-
windshield and wear the blades prema-
turely.
turely. turely.
turely.
turely. C180B01P-GAT
Windshield Washer
Windshield Washer Windshield Washer
Windshield Washer
Windshield Washer
C180B01P-1
The washer fluid will be sprayed onto the wind- shield by moving the lever in the direction of thearrow, that is, toward you.The wipers operate automatically while thewasher fluid is being sprayed. Avoid using the washer continuously for more than 20 seconds. Do not operate the washer when the fluid reservoir is empty.

2-13
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C190A01P-GAT
TAILGATE WIPER AND WASHER
TAILGATE WIPER AND WASHER TAILGATE WIPER AND WASHER
TAILGATE WIPER AND WASHER
TAILGATE WIPER AND WASHER
SWITCH (Minibus, Van)
SWITCH (Minibus, Van) SWITCH (Minibus, Van)
SWITCH (Minibus, Van)
SWITCH (Minibus, Van)
C190A01P-1
1. When the point indicates the , the rear window wiper starts to operate continuously after the washer fluid sprays onto the rearwindow.
2. When the point indicates the , the rear window wiper starts to operate continuous-ly.
3. OFF
4. The washer fluid will be sprayed onto the windshield by indicating the point onto the . The wiper operates automatically whilethe washer fluid is being sprayed.3 4
2
1
To use the intermittent wiper feature, place the
wiper switch in the "INT" position. With the switch in this position, the interval betweenwipes can be varied from approximately 1 to 18seconds by turning the interval adjuster barrel. B350C01O-AAT
Adjustable Intermittent Wiper
Adjustable Intermittent Wiper Adjustable Intermittent Wiper
Adjustable Intermittent Wiper
Adjustable Intermittent Wiper
Operation (If installed)
Operation (If installed) Operation (If installed)
Operation (If installed)
Operation (If installed)
C180A01P
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
(1)(1)
(1)(1)
(1)
Before operating the wiper in cold
Before operating the wiper in cold Before operating the wiper in cold
Before operating the wiper in cold
Before operating the wiper in cold
weather, check to be sure that the wiper
weather, check to be sure that the wiper weather, check to be sure that the wiper
weather, check to be sure that the wiper
weather, check to be sure that the wiper
blade is not frozen to the rear window.
blade is not frozen to the rear window. blade is not frozen to the rear window.
blade is not frozen to the rear window.
blade is not frozen to the rear window.
Attempting to operate the wiper while
Attempting to operate the wiper while Attempting to operate the wiper while
Attempting to operate the wiper while
Attempting to operate the wiper while
the blade is frozen to the rear window
the blade is frozen to the rear window the blade is frozen to the rear window
the blade is frozen to the rear window
the blade is frozen to the rear window
could cause the motor to burn out.
could cause the motor to burn out. could cause the motor to burn out.
could cause the motor to burn out.
could cause the motor to burn out.
(2)(2)
(2)(2)
(2) If the wiper stops during operation be-
If the wiper stops during operation be- If the wiper stops during operation be-
If the wiper stops during operation be-
If the wiper stops during operation be-
cause of ice or some other obstruction
cause of ice or some other obstruction cause of ice or some other obstruction
cause of ice or some other obstruction
cause of ice or some other obstruction
on the rear window, the wiper motor
on the rear window, the wiper motor on the rear window, the wiper motor
on the rear window, the wiper motor
on the rear window, the wiper motor
could burn out even if the wiper switch is
could burn out even if the wiper switch is could burn out even if the wiper switch is
could burn out even if the wiper switch is
could burn out even if the wiper switch is
turned off. If this occurs, promptly stop
turned off. If this occurs, promptly stop turned off. If this occurs, promptly stop
turned off. If this occurs, promptly stop
turned off. If this occurs, promptly stop
the vehicle, turn off the ignition switch,
the vehicle, turn off the ignition switch, the vehicle, turn off the ignition switch,
the vehicle, turn off the ignition switch,
the vehicle, turn off the ignition switch,
and clean the rear window to allow prop-
and clean the rear window to allow prop- and clean the rear window to allow prop-
and clean the rear window to allow prop-
and clean the rear window to allow prop-
er wiper operation.
er wiper operation. er wiper operation.
er wiper operation.
er wiper operation.
(3)(3)
(3)(3)
(3) Do not use the wiper when the rear win-
Do not use the wiper when the rear win- Do not use the wiper when the rear win-
Do not use the wiper when the rear win-
Do not use the wiper when the rear win-
dow is dry; doing so could scratch the
dow is dry; doing so could scratch the dow is dry; doing so could scratch the
dow is dry; doing so could scratch the
dow is dry; doing so could scratch the
rear window and wear the blade prema-
rear window and wear the blade prema- rear window and wear the blade prema-
rear window and wear the blade prema-
rear window and wear the blade prema-
turely.
turely. turely.
turely.
turely.
B340F01A-GAT Daytime Running Lights (If installed)
Daytime Running Lights (If installed) Daytime Running Lights (If installed)
Daytime Running Lights (If installed)
Daytime Running Lights (If installed)
Your Hyundai is equipped with daytime running
lights. The daytime running lights are used to improve visibility for oncoming traffic. Your ve-
hicle daytime running lights are designed toremain on continuously when the engine isoperating even though the headlight switch is inthe "OFF" position. However, the daytime run-
ning lights will be off while the parking brake isapplied.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-16 B380A01A-AAT
REAR WINDOW DEFROSTER SWITCH
REAR WINDOW DEFROSTER SWITCH REAR WINDOW DEFROSTER SWITCH
REAR WINDOW DEFROSTER SWITCH
REAR WINDOW DEFROSTER SWITCH
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
B380A01A-AAG
The rear window defroster is turned on by
pushing in on the switch. To turn the defrosteroff, push in on the switch a second time. The
rear window defroster automatically turns itselfoff after about 15 minutes. To restart the de-froster cycle, push in on the switch again after
it has turned itself off. CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
Do not clean the inner side of the rear
Do not clean the inner side of the rear Do not clean the inner side of the rear
Do not clean the inner side of the rear
Do not clean the inner side of the rear
window glass with an
window glass with an window glass with an
window glass with an
window glass with an abrasive type of glass
abrasive type of glass abrasive type of glass
abrasive type of glass
abrasive type of glass
cleaner or use a scraper to remove the
cleaner or use a scraper to remove the cleaner or use a scraper to remove the
cleaner or use a scraper to remove the
cleaner or use a scraper to remove the
foreign deposits
foreign deposits foreign deposits
foreign deposits
foreign deposits from the inner surface of
from the inner surface of from the inner surface of
from the inner surface of
from the inner surface of
the glass as this may cause damage to the
the glass as this may cause damage to the the glass as this may cause damage to the
the glass as this may cause damage to the
the glass as this may cause damage to the
defroster
defroster defroster
defroster
defroster
elements.
elements. elements.
elements.
elements.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
The engine must be running for the rear grid
The engine must be running for the rear grid The engine must be running for the rear grid
The engine must be running for the rear grid
The engine must be running for the rear grid
defroster to operate.
defroster to operate. defroster to operate.
defroster to operate.
defroster to operate.
C260A01P-GAT
HAZARD WARNING LIGHT SWITCH
HAZARD WARNING LIGHT SWITCH HAZARD WARNING LIGHT SWITCH
HAZARD WARNING LIGHT SWITCH
HAZARD WARNING LIGHT SWITCHThe indicator becomes illuminated when thefog lamp switch is turned on. The operation of the rear fog lamp is identical to the front fog lamp. (If installed)
C260A01P-GAG
The hazard warning flashers can always be operated, regardless of the position of the igni-tion key. When the button is pushed, hazard warning light gets on. When the button is pushed once again, hazard warning light gets off. When this switch is operated, all turn-signal indication lamps will flash continuously. Limit the operating time to less than an hour, otherwise the battery will be discharged.
C250A01P-GAT
FOG LAMP SWITCH
FOG LAMP SWITCH FOG LAMP SWITCH
FOG LAMP SWITCH
FOG LAMP SWITCH
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
C250A01P-GAG
FRT
C250A02P-GAG
RR
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
The lamps will only function when the
The lamps will only function when the The lamps will only function when the
The lamps will only function when the
The lamps will only function when the headlamps are in use.
headlamps are in use. headlamps are in use.
headlamps are in use.
headlamps are in use.
The front fog lamp is turned on by pushing the
switch located in the instrument panel. To turn the front fog lamp off, push the switch again.

2-19
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B470A01S-AAT SUNSHADE (Minibus) (If installed)
SUNSHADE (Minibus) (If installed) SUNSHADE (Minibus) (If installed)
SUNSHADE (Minibus) (If installed)
SUNSHADE (Minibus) (If installed)
B470A01S-AAG
The sunshade can be opened and closed by
sliding it forward or rearward when the sunroof
is closed. The sunshade will open automaticallywhen the sunroof is opened, but it must beclosed manually. B460A01S-AAT
SUNROOF (Minibus) (If installed)
SUNROOF (Minibus) (If installed) SUNROOF (Minibus) (If installed)
SUNROOF (Minibus) (If installed)
SUNROOF (Minibus) (If installed)
The sunroof can be operated with the ignition
key in the "ON" position. B460B02P-GAT
OPERATING THE SUNROOF SYSTEM
OPERATING THE SUNROOF SYSTEM OPERATING THE SUNROOF SYSTEM
OPERATING THE SUNROOF SYSTEM
OPERATING THE SUNROOF SYSTEM
Opening or closing the sunroof
Opening or closing the sunroof Opening or closing the sunroof
Opening or closing the sunroof
Opening or closing the sunroofB460B01P
FRT RR
The sunfoof can be electrically opened or closed.
To open or close, press and hold the button located in the front of the roof panel. Andrelease the button when the sunfoof reachesthe desired position.
B460B03P-GAG
B460B02P-GAG
In case of closing the rear sunroof, it stops at a
half position before full closing. Therefore, re- lease the button and then press and hold itagain to close it completely.
WARNING:
WARNING: WARNING:
WARNING:
WARNING:
oo
oo
o Do not close a sunroof if anyone's hands,
Do not close a sunroof if anyone's hands, Do not close a sunroof if anyone's hands,
Do not close a sunroof if anyone's hands,
Do not close a sunroof if anyone's hands,
arms or body are between the sliding
arms or body are between the sliding arms or body are between the sliding
arms or body are between the sliding
arms or body are between the sliding
glass and the sunroof sash, as this could
glass and the sunroof sash, as this could glass and the sunroof sash, as this could
glass and the sunroof sash, as this could
glass and the sunroof sash, as this could
result in an injury.
result in an injury. result in an injury.
result in an injury.
result in an injury.
oo
oo
o Do not stand up or extend any portion of
Do not stand up or extend any portion of Do not stand up or extend any portion of
Do not stand up or extend any portion of
Do not stand up or extend any portion of
your body out of the opening while the
your body out of the opening while the your body out of the opening while the
your body out of the opening while the
your body out of the opening while the
vehicle is moving.
vehicle is moving. vehicle is moving.
vehicle is moving.
vehicle is moving.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
oo
oo
o Do not open the sunroof in severely cold
Do not open the sunroof in severely cold Do not open the sunroof in severely cold
Do not open the sunroof in severely cold
Do not open the sunroof in severely cold
temperature or when it is covered with
temperature or when it is covered with temperature or when it is covered with
temperature or when it is covered with
temperature or when it is covered with
ice or snow.
ice or snow. ice or snow.
ice or snow.
ice or snow.
oo
oo
o Periodically remove any dirt that may
Periodically remove any dirt that may Periodically remove any dirt that may
Periodically remove any dirt that may
Periodically remove any dirt that may
have accumulated on the guide rails.
have accumulated on the guide rails. have accumulated on the guide rails.
have accumulated on the guide rails.
have accumulated on the guide rails.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-22 B510D01Y-AAT
OUTSIDE REARVIEW MIRROR HEAT-
OUTSIDE REARVIEW MIRROR HEAT- OUTSIDE REARVIEW MIRROR HEAT-
OUTSIDE REARVIEW MIRROR HEAT-
OUTSIDE REARVIEW MIRROR HEAT-
ER (If installed)
ER (If installed) ER (If installed)
ER (If installed)
ER (If installed)
B510D01Y-AAG
The outside rearview mirror heater is actuated
in connection with rear window defroster. So, toheat the outside rearview mirror glass, push inthe switch for rear window defroster. The rear-
view mirror glass will be heated for defrosting ordefogging and will give you improved rear vi-
sion in all weather conditions. Push the switch
again to turn the heater off. The outside rear-view mirror heater automatically turns itself offafter 15 minutes. B450A01S-AAT
DRINK HOLDER (If installed)
DRINK HOLDER (If installed) DRINK HOLDER (If installed)
DRINK HOLDER (If installed)
DRINK HOLDER (If installed)
The drink holder is located on the front mainconsole for holding cups or cans in its holes.
The drink holder can be used by pushing it at itstop edge. CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
Place the drink holder in its original position
Place the drink holder in its original position Place the drink holder in its original position
Place the drink holder in its original position
Place the drink holder in its original position
while not in
while not in while not in
while not in
while not in
use.use.
use.use.
use.
WARNING:
WARNING: WARNING:
WARNING:
WARNING:
Do not place anything else on the drink
Do not place anything else on the drink Do not place anything else on the drink
Do not place anything else on the drink
Do not place anything else on the drink
holder. Such objects
holder. Such objects holder. Such objects
holder. Such objects
holder. Such objects can be thrown out,
can be thrown out, can be thrown out,
can be thrown out,
can be thrown out,
possibly injuring persons in the vehicle dur-
possibly injuring persons in the vehicle dur- possibly injuring persons in the vehicle dur-
possibly injuring persons in the vehicle dur-
possibly injuring persons in the vehicle dur-
ing sudden
ing sudden ing sudden
ing sudden
ing sudden braking or in an accident.
braking or in an accident. braking or in an accident.
braking or in an accident.
braking or in an accident.
C370B01P-GAT
Electric Type (If installed)
Electric Type (If installed) Electric Type (If installed)
Electric Type (If installed)
Electric Type (If installed)
The outside rear view mirror can be adjusted in
any direction to give the maximum rear-viewvision.
The remote control outside rear view mirror
switch controls the adjustments for both rightand left door mirror.
To adjust the position of either mirror:
To adjust the position of either mirror: To adjust the position of either mirror:
To adjust the position of either mirror:
To adjust the position of either mirror:
1. Move the selecting switch to the "R" (or "L")
position to activate the adjustable mecha- nism for the adjusting door mirror.
2. Now, adjust mirror angle by depressing the appropriate perimeter switch as illustrated.
HSR2320HSR2318

2-23
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C400A02P-GAT
CIGARETTE LIGHTER
CIGARETTE LIGHTER CIGARETTE LIGHTER
CIGARETTE LIGHTER
CIGARETTE LIGHTER The cigarette lighter can be used while the ignition switch is at either the "ON" or "ACC". Touse the cigarette lighter, push it all the way intoits socket. The lighter will automatically return to its original position with a "click" when ready. Pull it out for use.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
oo
oo
o Something is wrong with the cigarette
Something is wrong with the cigarette Something is wrong with the cigarette
Something is wrong with the cigarette
Something is wrong with the cigarette
lighter if it does not pop back out within
lighter if it does not pop back out within lighter if it does not pop back out within
lighter if it does not pop back out within
lighter if it does not pop back out within
approximately 8~18 seconds of being
approximately 8~18 seconds of being approximately 8~18 seconds of being
approximately 8~18 seconds of being
approximately 8~18 seconds of being
pushed in. Leaving the cigarette lighter
pushed in. Leaving the cigarette lighter pushed in. Leaving the cigarette lighter
pushed in. Leaving the cigarette lighter
pushed in. Leaving the cigarette lighter
pushed in for an extended period could
pushed in for an extended period could pushed in for an extended period could
pushed in for an extended period could
pushed in for an extended period could
cause a fire. If it does not pop out by
cause a fire. If it does not pop out by cause a fire. If it does not pop out by
cause a fire. If it does not pop out by
cause a fire. If it does not pop out by
itself, pull it out and have the problem
itself, pull it out and have the problem itself, pull it out and have the problem
itself, pull it out and have the problem
itself, pull it out and have the problem
corrected at an authorized HYUNDAI
corrected at an authorized HYUNDAI corrected at an authorized HYUNDAI
corrected at an authorized HYUNDAI
corrected at an authorized HYUNDAI
dealer.
dealer. dealer.
dealer.
dealer. C410A01P-GAT
FRONT ASHTRAY
FRONT ASHTRAY FRONT ASHTRAY
FRONT ASHTRAY
FRONT ASHTRAY
Pull out the ashtray to open. To remove the
ashtray, pull it out while pressing the stubber. oo
oo
o Do not use electric accessories or equip-
Do not use electric accessories or equip- Do not use electric accessories or equip-
Do not use electric accessories or equip-
Do not use electric accessories or equip-
ment other than the Hyundai genuine
ment other than the Hyundai genuine ment other than the Hyundai genuine
ment other than the Hyundai genuine
ment other than the Hyundai genuine
parts in the socket.
parts in the socket. parts in the socket.
parts in the socket.
parts in the socket.
HSR2315
HSR2317
GS20250A
C420A01P-GAT
REAR ASHTRAY
REAR ASHTRAY REAR ASHTRAY
REAR ASHTRAY
REAR ASHTRAY
Type A (If installed)
Type A (If installed) Type A (If installed)
Type A (If installed)
Type A (If installed)
Pull the ashtray downward to open. To remove
the ashtray, pull it out while pressing the stubber.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-40 K240D01TB-GAT
1. Tape mode and side selection But-
1. Tape mode and side selection But- 1. Tape mode and side selection But-
1. Tape mode and side selection But-
1. Tape mode and side selection But-
tonton
tonton
ton
Press this button to play the tape when it is in
the cassette deck. Once the tape mode is selected, you can play the reverse side of thetape by merely depressing the button again.
2. Cassette tape loading slot
2. Cassette tape loading slot 2. Cassette tape loading slot
2. Cassette tape loading slot
2. Cassette tape loading slot
Insert the tape into the loading slot as the open
side faces the right. The player will pull the tapein and automatically begin playback even whenthe audio power is off and the ignition switch iseither in the position of "ACC"or "ON".
3. Tape Eject Button ( )
3. Tape Eject Button ( ) 3. Tape Eject Button ( )
3. Tape Eject Button ( )
3. Tape Eject Button ( )
Press this button to eject the cassette tape.
Tape will be ejected even when the ignitionswitch is in the position of "OFF".
4. LCD
4. LCD 4. LCD
4. LCD
4. LCD
LCD shows the operating conditions of the
cassette in play. It informs the driver of playingstatus, tape direction, FF or REW, MTL inmetallic tape use, and Dolby etc.
5. Dolby Button
5. Dolby Button 5. Dolby Button
5. Dolby Button
5. Dolby Button
When you play the Dolby recorded tape, press
this button to reduce the background noise. Ifyou press this button is displayed. One morepress will let the disappear from the dis-play. 6. AMS-REW Button ( )
6. AMS-REW Button ( ) 6. AMS-REW Button ( )
6. AMS-REW Button ( )
6. AMS-REW Button ( )
Press button to rewind the tape quickly andstart replay at the beginning of the currentmusic. During the AMS-REWINDING. "REW"sign blinks on the display. Press the button once more to stop REWIND- ING and start play again.
7. Rewind button ( )
7. Rewind button ( ) 7. Rewind button ( )
7. Rewind button ( )
7. Rewind button ( )
You can rewind the tape to the beginning of thetape by pressing the " " button during theplay ("Rew" is shown on the display). Tape playstarts when the " " button is pressed againduring the REW mode.
8. AMS-FF Button ( )
8. AMS-FF Button ( ) 8. AMS-FF Button ( )
8. AMS-FF Button ( )
8. AMS-FF Button ( )
Press button to fast forward the tape and startplay at the beginning of next music segment.During the AMS-FF, "FF"sign blinks on thedisplay. Press the button again to stop FF action and start play.
9. Fast Forward Button ( )
9. Fast Forward Button ( ) 9. Fast Forward Button ( )
9. Fast Forward Button ( )
9. Fast Forward Button ( )
You can fast forward the tape to the end of thetape by pressing the " " button during theplay. (Then "FF" is shown on the display). Tapeplay starts when the button is pressedagain during the ff mode.