2003 Hyundai H-1 (Grand Starex) heater

2-1
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C020A01P-1
1. Side air vent
2. Multi-function light switch
3. Horn/Driver's Side Airbag (If installed)
4. Windshield wiper/washer switch (If installed)
5. Hazard warning switch
6. Front fog light switch (If installed)
7. 4WD Switch (If installed)
8. Rear fog light switch (If installed)
9. Rear window defroster switch
10.Center air vent louver 11. Passenger's Side Airbag (If installed)
12. Glove box
13. Headlamp leveling device switch
(If installed)
14. ECT switch (A/T Only)
15. Hood release lever
16. Panel brightness control knob (=RHEOSTAT) (If installed)
17. Seat warmer switch (If installed)
18. Choke knob (If installed) 19. Steering wheel tilt lever (If installed)
20. Ignition switch
21. Rear heater switch (If installed)
22. Heater/air conditioner control panel
23. Cigarette lighter
24. Air conditioner switch (If installed)
25. Ashtray
26. Audio system (If installed)
27. Drink holder
28. Digital clock (If installed) CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
When installing the container of liquid air
When installing the container of liquid air When installing the container of liquid air
When installing the container of liquid air
When installing the container of liquid air refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it
near the instrument cluster nor on the crash
near the instrument cluster nor on the crash near the instrument cluster nor on the crash
near the instrument cluster nor on the crash
near the instrument cluster nor on the crash
pad surface. If there is any leakage from the
pad surface. If there is any leakage from the pad surface. If there is any leakage from the
pad surface. If there is any leakage from the
pad surface. If there is any leakage from the
air refresher onto these areas (Instrument
air refresher onto these areas (Instrument air refresher onto these areas (Instrument
air refresher onto these areas (Instrument
air refresher onto these areas (Instrument
cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may
damage these parts. If the liquid from air
damage these parts. If the liquid from air damage these parts. If the liquid from air
damage these parts. If the liquid from air
damage these parts. If the liquid from air
refresher does leak onto these areas, wash
refresher does leak onto these areas, wash refresher does leak onto these areas, wash
refresher does leak onto these areas, wash
refresher does leak onto these areas, wash
them with water immediately.
them with water immediately. them with water immediately.
them with water immediately.
them with water immediately.
C000A01P-GAT
2.2.
2.2.
2.
INSTR
INSTR INSTR
INSTR
INSTR
UMENTS & CONTR
UMENTS & CONTR UMENTS & CONTR
UMENTS & CONTR
UMENTS & CONTR
OLS
OLS OLS
OLS
OLS
12
31 051 0
12 4 6 9 78
C020A02P-GAT
POSITIONS OF SWITCHES AND LEVERS (M
POSITIONS OF SWITCHES AND LEVERS (M POSITIONS OF SWITCHES AND LEVERS (M
POSITIONS OF SWITCHES AND LEVERS (M
POSITIONS OF SWITCHES AND LEVERS (M inibus, Van)
inibus, Van) inibus, Van)
inibus, Van)
inibus, Van)
14
24 26
13 15 17 16 18 19 20 21 22 23 25 27
28
11
22
22
2

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-2
C020A02P-1
1. Side air vent
2. Multi-function light switch
3. Horn/Driver's Side Airbag (If installed)
4. Windshield wiper/washer switch (If installed)
5. Hazard warning switch
6. Front fog light switch (If installed)
7. Rear fog light switch (If installed)
8. Outside rearview mirror heater switch (If installed) 9. Center air vent louver
10. Glove box
11. Hood release lever
12. Headlamp leveling device switch (If installed)
13. Choke knob
14. Steering wheel tilt lever (If installed)
15. Ignition switch 16. Heater/air conditioner control panel
17. Cigarette lighter
18. Air conditioner switch (If installed)
19. Ashtray
20. Audio system (If installed)
21. Drink holder
22. Digital clock (If installed)CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
When installing the container of liquid air
When installing the container of liquid air When installing the container of liquid air
When installing the container of liquid air
When installing the container of liquid air
refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it
near the instrument cluster nor on the crash
near the instrument cluster nor on the crash near the instrument cluster nor on the crash
near the instrument cluster nor on the crash
near the instrument cluster nor on the crash
pad surface. If there is any leakage from the
pad surface. If there is any leakage from the pad surface. If there is any leakage from the
pad surface. If there is any leakage from the
pad surface. If there is any leakage from the
air refresher onto these areas (Instrument
air refresher onto these areas (Instrument air refresher onto these areas (Instrument
air refresher onto these areas (Instrument
air refresher onto these areas (Instrument
cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may
damage these parts. If the liquid from air
damage these parts. If the liquid from air damage these parts. If the liquid from air
damage these parts. If the liquid from air
damage these parts. If the liquid from air
refresher does leak onto these areas, wash
refresher does leak onto these areas, wash refresher does leak onto these areas, wash
refresher does leak onto these areas, wash
refresher does leak onto these areas, wash
them with water immediately.
them with water immediately. them with water immediately.
them with water immediately.
them with water immediately.
11 39
5 1 0
12 4 6 9 78
C020B01P-GAT
POSITIONS OF SWITCHES AND LEVERS (T
POSITIONS OF SWITCHES AND LEVERS (T POSITIONS OF SWITCHES AND LEVERS (T
POSITIONS OF SWITCHES AND LEVERS (T
POSITIONS OF SWITCHES AND LEVERS (T ruck)
ruck) ruck)
ruck)
ruck)
13
12 14 16 15 17 18 19 20 21 22

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-22 B510D01Y-AAT
OUTSIDE REARVIEW MIRROR HEAT-
OUTSIDE REARVIEW MIRROR HEAT- OUTSIDE REARVIEW MIRROR HEAT-
OUTSIDE REARVIEW MIRROR HEAT-
OUTSIDE REARVIEW MIRROR HEAT-
ER (If installed)
ER (If installed) ER (If installed)
ER (If installed)
ER (If installed)
B510D01Y-AAG
The outside rearview mirror heater is actuated
in connection with rear window defroster. So, toheat the outside rearview mirror glass, push inthe switch for rear window defroster. The rear-
view mirror glass will be heated for defrosting ordefogging and will give you improved rear vi-
sion in all weather conditions. Push the switch
again to turn the heater off. The outside rear-view mirror heater automatically turns itself offafter 15 minutes. B450A01S-AAT
DRINK HOLDER (If installed)
DRINK HOLDER (If installed) DRINK HOLDER (If installed)
DRINK HOLDER (If installed)
DRINK HOLDER (If installed)
The drink holder is located on the front mainconsole for holding cups or cans in its holes.
The drink holder can be used by pushing it at itstop edge. CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
Place the drink holder in its original position
Place the drink holder in its original position Place the drink holder in its original position
Place the drink holder in its original position
Place the drink holder in its original position
while not in
while not in while not in
while not in
while not in
use.use.
use.use.
use.
WARNING:
WARNING: WARNING:
WARNING:
WARNING:
Do not place anything else on the drink
Do not place anything else on the drink Do not place anything else on the drink
Do not place anything else on the drink
Do not place anything else on the drink
holder. Such objects
holder. Such objects holder. Such objects
holder. Such objects
holder. Such objects can be thrown out,
can be thrown out, can be thrown out,
can be thrown out,
can be thrown out,
possibly injuring persons in the vehicle dur-
possibly injuring persons in the vehicle dur- possibly injuring persons in the vehicle dur-
possibly injuring persons in the vehicle dur-
possibly injuring persons in the vehicle dur-
ing sudden
ing sudden ing sudden
ing sudden
ing sudden braking or in an accident.
braking or in an accident. braking or in an accident.
braking or in an accident.
braking or in an accident.
C370B01P-GAT
Electric Type (If installed)
Electric Type (If installed) Electric Type (If installed)
Electric Type (If installed)
Electric Type (If installed)
The outside rear view mirror can be adjusted in
any direction to give the maximum rear-viewvision.
The remote control outside rear view mirror
switch controls the adjustments for both rightand left door mirror.
To adjust the position of either mirror:
To adjust the position of either mirror: To adjust the position of either mirror:
To adjust the position of either mirror:
To adjust the position of either mirror:
1. Move the selecting switch to the "R" (or "L")
position to activate the adjustable mecha- nism for the adjusting door mirror.
2. Now, adjust mirror angle by depressing the appropriate perimeter switch as illustrated.
HSR2320HSR2318

2-25
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C640A01P-GATVENTILATION
VENTILATION VENTILATION
VENTILATION
VENTILATION To operate the ventilation system:
o Set the air intake control to the "Fresh"
position.
o To direct all intake air to the dashboard vents, set the air flow control to the "Face" position.
o Adjust the fan speed control to the desired speed.
o Set the temperature control between "Cool" and "Warm".
C620A01P-GAT
HEATING CONTROLS
HEATING CONTROLS HEATING CONTROLS
HEATING CONTROLS
HEATING CONTROLS
For normal heater operation, move the air in-
take control to the "Fresh" position and the airflow control to the "Floor" position.
For faster heating, the air intake control should
be placed in the intermediate position between"Fresh" and "Recirc".
For quickest heating, the control should be in
the "Recirc" position.
If the windows fog up, move the air flow control
to the "Def" (defroster) position and the airintake control to "Fresh". For maximum heat, move the temperature con-
trol to "Warm". C630A01P-GAT
BI-LEVEL HEATING
BI-LEVEL HEATING BI-LEVEL HEATING
BI-LEVEL HEATING
BI-LEVEL HEATING
Your Hyundai is equipped with bi-level heating
controls. This makes it possible to have coolerair from the dashboard vents and warmer airfrom the floor outlets at the same time. To usethis feature,
o Set the air intake control at the "Fresh" position.
o Set the air flow control at the "Bi-Level" position.
o Set the temperaute control between "Cool" and "Warm"
2. Air Intake Control.
This allows you to select fresh ( ) outside air or to recirculate ( ) inside air.
3. Air Flow Control. This is used to direct the flow of air. Air canbe directed to the floor, dashboard outlets orwindshield. Five symbols are used to repre-sent Face ( ), Bi-Level ( ), Floor ( ),Floor-Defrost ( ) and Defrost ( ) airpositions.
4. Temperature Control This is used to turn the heater on and offand to select the degree of heating desired.
B710B01A-AAT
CENTER VENTILATOR
CENTER VENTILATOR CENTER VENTILATOR
CENTER VENTILATOR
CENTER VENTILATOR
B710B01P
The center ventilators are located in the middle
of the dashboard.
To change the direction of the airflow, turn the
control knob on the middle of the ventilator as desired.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-28 C730A01P-GAT
CONTROL PANEL
CONTROL PANEL CONTROL PANEL
CONTROL PANEL
CONTROL PANEL
C730A01P-1
213
REAR HEATER & A/CON (ROTARY TYPE)
C730A02P-1
REAR HEATER & A/CON (LEVER TYPE)
1
2 3
1.1.
1.1.
1. Mode selector lever
Mode selector lever Mode selector lever
Mode selector lever
Mode selector lever Air flow can be switched in three modes. Three symbols are used to represent FloorHeat, Bi-level and Vent Air position.
C700A01P-GAT
Operation Tips
Operation Tips Operation Tips
Operation Tips
Operation Tips
o If the interior of the vehicle is hot when you
first get in, open the windows for a few minutes to expel the hot air.
o When you are using the air conditioning system, keep all windows closed to keephot air out.
o When you must drive slowly, as in heavy traffic, shift to a lower gear. This increasesengine speed, which in turn increases thespeed of the air conditioning compressor.
o When driving up long grades, turn occa- sionally the air conditioner off to avoid thepossibility of the engine overheating.
o During winter months or in periods when the air conditioner is not used regularly, turn onthe air conditioner switch occasionally for afew minutes. This will help circulate thelubricants and keep your system in peakoperating condition.
C710A01P-GAT REAR HEATER (If installed)
REAR HEATER (If installed) REAR HEATER (If installed)
REAR HEATER (If installed)
REAR HEATER (If installed)
The rear heater can be operated with the igni-
tion switch at the "ON" position by depressingthe main switch in the instrument panel. C720A01P-GAT
Main switch for the rear heater
Main switch for the rear heater Main switch for the rear heater
Main switch for the rear heater
Main switch for the rear heater
C720A01P-GAG
The main switch for the rear heater is installed
in the instrument panel.
The main switch should be used to switch the
power of the rear heater ON and OFF.
The power is switched ON when the button is
pressed, and the lamp within the switch is illuminated. Illumination will stop and the powerwill be switched OFF when the button is pressedonce again.

2-29
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C750A03P-GATOVERHEAD AIR CONDITIONING
OVERHEAD AIR CONDITIONING OVERHEAD AIR CONDITIONING
OVERHEAD AIR CONDITIONING
OVERHEAD AIR CONDITIONING
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
C750A01P-1
1
The overhead air conditioner can be operated
with the ignition switch at the "ON" position by depressing the main switch in the instrumentpanel.
1. Blower knob
The blower can be operated at three speeds to regulate the amount of air forced throughthe vehicle. The overhead air conditionerwill not operate if the knob is set to the "O". The blower speed will increase as the knob is moved to the right.
2.2.
2.2.
2. Temperature controller
Temperature controller Temperature controller
Temperature controller
Temperature controller
Lever type - Select the desired tempera-
ture by sliding the lever left or right.
Rotary type - Select the desired tempera- ture by turn the knob left orright.
Red - High temperaute (heating)
Blue - Ambient temperature(ventilating)
3.3.
3.3.
3. Blower controller
Blower controller Blower controller
Blower controller
Blower controllerThe blower can be operated (when the ignition key and main switch for the rearheater is at the "ON" position) at threespeeds to regulate the amount of air forcedthrough the vehicle. The blower speed will increase as the switch is moved to the right.
C740A01P-GAT REAR AIR CONDITIONING (If installed)
REAR AIR CONDITIONING (If installed) REAR AIR CONDITIONING (If installed)
REAR AIR CONDITIONING (If installed)
REAR AIR CONDITIONING (If installed)
The rear air conditioner can be operated with
the ignition switch at the "ON" position by de-pressing the main switch in the instrument panel.
1. Air conditioning switch
The air conditioning is turned on or off by pushing the button.
2. The operations of the rear air conditioner is identical to AIR CONDITIONER OPERRA-TION of page 2-27.
C760A01P-GAG
B760A02P-GAT
AIR FILTER (FOR EVAPORATOR AND
AIR FILTER (FOR EVAPORATOR AND AIR FILTER (FOR EVAPORATOR AND
AIR FILTER (FOR EVAPORATOR AND
AIR FILTER (FOR EVAPORATOR AND
BLOWER UNIT) (If installed)
BLOWER UNIT) (If installed) BLOWER UNIT) (If installed)
BLOWER UNIT) (If installed)
BLOWER UNIT) (If installed)
The air filter is located in the air intake duct
behind the windshield washer reservoir. It oper- ates to prevent the pollutant entering the car.
C760B01PClamp
Air intake duct
Air intake duct
Air Filter
Air intake duct
Engine room
Evaporator unit
Blower unit
Air Filter Inside ofvehicle

3-17
STARTING & OPERATING
STARTING & OPERATING STARTING & OPERATING
STARTING & OPERATING
STARTING & OPERATING
D180L01P-GAT Tire chains
Tire chains Tire chains
Tire chains
Tire chains
If tire chains are to be used, be sure that they
are mounted on the rear wheels.
Use only tire chains which are designed for use
with the tires mounted on the vehicle; use of the incorrect size or type of chain could result indamage to the vehicle body.
Before driving over long stretches of road which
are free of snow, you should remove the chainsto avoid damage to the tires.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
The laws and regulations concerning tire
The laws and regulations concerning tire The laws and regulations concerning tire
The laws and regulations concerning tire
The laws and regulations concerning tire chains vary. Find out and follow the laws
chains vary. Find out and follow the laws chains vary. Find out and follow the laws
chains vary. Find out and follow the laws
chains vary. Find out and follow the laws
and regulations in your area.
and regulations in your area. and regulations in your area.
and regulations in your area.
and regulations in your area.
When parking on a steep slope, turn the front
wheels in towards the kerb and chock the wheels.
D180I01P-GATWashing the vehicle
Washing the vehicle Washing the vehicle
Washing the vehicle
Washing the vehicle
The salt and other chemicals spread on winter
roads in some areas can have a detrimentaleffect on a vehicle body. You should thereforewash the vehicle as often as convenient inaccordance with our care-instruction. Have apreservative applied and the underfloor protec-tion checked at an authorized HYUNDAI dealerbefore and after the cold weather season. D180M02P-GAT
ADDITIONAL EQUIPMENT
ADDITIONAL EQUIPMENT ADDITIONAL EQUIPMENT
ADDITIONAL EQUIPMENT
ADDITIONAL EQUIPMENT
It is a good idea to carry a shovel or a short-handled spade in the vehicle during the winterso that you can clear away snow if you getstuck. A small hand-brush for sweeping snowoff the windscreen and rear window is alsouseful.
HAI3001
CAUTION:(If installed)
CAUTION:(If installed) CAUTION:(If installed)
CAUTION:(If installed)
CAUTION:(If installed)
White smoke may arise from the fuel fired
White smoke may arise from the fuel fired White smoke may arise from the fuel fired
White smoke may arise from the fuel fired
White smoke may arise from the fuel fired
heater outlet in the driver's front wheel hous-
heater outlet in the driver's front wheel hous- heater outlet in the driver's front wheel hous-
heater outlet in the driver's front wheel hous-
heater outlet in the driver's front wheel hous-
ing during winter driving. This is a normal
ing during winter driving. This is a normal ing during winter driving. This is a normal
ing during winter driving. This is a normal
ing during winter driving. This is a normal
condition.
condition. condition.
condition.
condition.
But, If a black (or gray) smoke is generated
But, If a black (or gray) smoke is generated But, If a black (or gray) smoke is generated
But, If a black (or gray) smoke is generated
But, If a black (or gray) smoke is generated
heavily, have the fuel fired heater checked
heavily, have the fuel fired heater checked heavily, have the fuel fired heater checked
heavily, have the fuel fired heater checked
heavily, have the fuel fired heater checked
by your Hyundai dealer.
by your Hyundai dealer. by your Hyundai dealer.
by your Hyundai dealer.
by your Hyundai dealer.
If the engine stops while the fuel fired heater
If the engine stops while the fuel fired heater If the engine stops while the fuel fired heater
If the engine stops while the fuel fired heater
If the engine stops while the fuel fired heater
is operating, whizzing noise may be heard
is operating, whizzing noise may be heard is operating, whizzing noise may be heard
is operating, whizzing noise may be heard
is operating, whizzing noise may be heard
from the lower of the battery in the engine
from the lower of the battery in the engine from the lower of the battery in the engine
from the lower of the battery in the engine
from the lower of the battery in the engine
compartment.
compartment. compartment.
compartment.
compartment.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
The laws and regulations concerning snow
The laws and regulations concerning snow The laws and regulations concerning snow
The laws and regulations concerning snow
The laws and regulations concerning snow tires (driving speed, required use, type, etc.)
tires (driving speed, required use, type, etc.) tires (driving speed, required use, type, etc.)
tires (driving speed, required use, type, etc.)
tires (driving speed, required use, type, etc.)
vary. Find out and follow the laws and reg-
vary. Find out and follow the laws and reg- vary. Find out and follow the laws and reg-
vary. Find out and follow the laws and reg-
vary. Find out and follow the laws and reg-
ulations in your area.
ulations in your area. ulations in your area.
ulations in your area.
ulations in your area.
D180K01P-GAT Snow tires
Snow tires Snow tires
Snow tires
Snow tires
The use of snow tires is recommended for
driving in snow and ice. To preserve driving stability, mount snow tires of the same size andtread pattern on all four wheels.
Snow tires worn more than 50% are no longer
suitable for use as snow tires.
Snow tires which do not meet specifications
must not be used. D180J01P-GAT
Weather strip
Weather strip Weather strip
Weather strip
Weather strip
To prevent freezing of the weather strip on the
doors, the roof, etc., they should be treated withsilicone grease.

STARTING & OPERATING
STARTING & OPERATING STARTING & OPERATING
STARTING & OPERATING
STARTING & OPERATING
3-18 (1) Position the vehicle so that one wheel is on
a dry paved surface and the other on ice, snow, mud, etc. Drive the vehicle, and observe the operation of the limited-slip differential. The vehicle should not become stuck if the differential is functioning properly.
(2) Depress the accelerator pedal gradually, and then when traction is good, depress itforcefully. If the vehicle accelerates well, thedifferential is functioning properly.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
(1)(1)
(1)(1)
(1) Never start the engine while one of the
Never start the engine while one of the Never start the engine while one of the
Never start the engine while one of the
Never start the engine while one of the
rear wheels is jacked up and the other in
rear wheels is jacked up and the other in rear wheels is jacked up and the other in
rear wheels is jacked up and the other in
rear wheels is jacked up and the other in
contact with the ground; doing so may
contact with the ground; doing so may contact with the ground; doing so may
contact with the ground; doing so may
contact with the ground; doing so may
cause the vehicle to jump forward.
cause the vehicle to jump forward. cause the vehicle to jump forward.
cause the vehicle to jump forward.
cause the vehicle to jump forward.
(2)(2)
(2)(2)
(2) If one of the rear wheels begins to spin in
If one of the rear wheels begins to spin in If one of the rear wheels begins to spin in
If one of the rear wheels begins to spin in
If one of the rear wheels begins to spin in
mud, snow, etc., the vehicle can some-
mud, snow, etc., the vehicle can some- mud, snow, etc., the vehicle can some-
mud, snow, etc., the vehicle can some-
mud, snow, etc., the vehicle can some-
times be driven out by depressing the
times be driven out by depressing the times be driven out by depressing the
times be driven out by depressing the
times be driven out by depressing the
accelerator pedal further; however, avoid
accelerator pedal further; however, avoid accelerator pedal further; however, avoid
accelerator pedal further; however, avoid
accelerator pedal further; however, avoid
running the engine continuously at high
running the engine continuously at high running the engine continuously at high
running the engine continuously at high
running the engine continuously at high
rpm because doing so could damage the
rpm because doing so could damage the rpm because doing so could damage the
rpm because doing so could damage the
rpm because doing so could damage the
limited-slip differential.
limited-slip differential. limited-slip differential.
limited-slip differential.
limited-slip differential.
D190A02P-GAT
LIMITED-SLIP DIFFERENTIAL
LIMITED-SLIP DIFFERENTIAL LIMITED-SLIP DIFFERENTIAL
LIMITED-SLIP DIFFERENTIAL
LIMITED-SLIP DIFFERENTIAL
(If installed)
(If installed) (If installed)
(If installed)
(If installed) A limited-slip differential, if equipped, is for the
rear wheel differential only. The features of this limited-slip differential are described below:
Just as with a conventional differential, the
wheel on one side is allowed to turn at adifferent speed from the wheel on the other sidewhen the vehicle is cornering. The differencebetween the limited-slip differential and a con-ventional differential is that if the wheel on oneside of the vehicle loses traction, a greateramount of torque is applied to the rear wheel onthe other side to improve traction.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
In a stationary position, the L.S.D will oper-
In a stationary position, the L.S.D will oper- In a stationary position, the L.S.D will oper-
In a stationary position, the L.S.D will oper-
In a stationary position, the L.S.D will oper- ate when the torque difference between the
ate when the torque difference between the ate when the torque difference between the
ate when the torque difference between the
ate when the torque difference between the
rear right wheel and the left wheel is from
rear right wheel and the left wheel is from rear right wheel and the left wheel is from
rear right wheel and the left wheel is from
rear right wheel and the left wheel is from
5Kgf·m to 9 Kgf·m.
5Kgf·m to 9 Kgf·m. 5Kgf·m to 9 Kgf·m.
5Kgf·m to 9 Kgf·m.
5Kgf·m to 9 Kgf·m.
The following procedures can be used to con-
firm that the limited-slip differential is function- ing properly: This is due to cleaning process for fuel fired
This is due to cleaning process for fuel fired This is due to cleaning process for fuel fired
This is due to cleaning process for fuel fired
This is due to cleaning process for fuel fired
heater and a normal operation.
heater and a normal operation. heater and a normal operation.
heater and a normal operation.
heater and a normal operation.
It will takes about 1- 3 minutes according to
It will takes about 1- 3 minutes according to It will takes about 1- 3 minutes according to
It will takes about 1- 3 minutes according to
It will takes about 1- 3 minutes according to
fuel quantity in the fuel fired heater fuel line.
fuel quantity in the fuel fired heater fuel line. fuel quantity in the fuel fired heater fuel line.
fuel quantity in the fuel fired heater fuel line.
fuel quantity in the fuel fired heater fuel line.