FEATURES OF YOUR HYUNDAI 1- 9
The use of a cushion that holds the body away from the seatback is not recom-mended.
o Do not operate the vehicle with the head- rests removed as severe injury to an occu-pant may occur in the event of an acci-dent. Headrests may provide protectionagainst severe neck injuries when prop-erly adjusted.
B080E01F-AAT Lumbar Support Control (Driver's seat only) (If Installed) The driver's seat is equipped with adjustable lumbar support.To increase the amount of lumbar support, pullthe lever forward.To decrease it, push the lever toward the rear. B080F01F-AAT Seat Cushion Height Adjustment (Driver's Seat Only) (If Installed) To raise or lower the front part of the seat cush- ion, turn the knob forward or rearward.
HGK052
SOFT
FIRM
HGK050
B100A01Y-AAT SEAT WARMER (If Installed) The seat warmer is provided to warm the front seats during cold weather. With the ignition keyin the "ON" position, push either of the switchesto warm the driver's seat or the passenger's seat.During mild weather or under conditions wherethe operation of the seat warmer is not needed,keep the switches in the "OFF" position.
HGK123
B129A01F-AAT REAR SEAT POSITIONS
B129A01GK
WARNING: This vehicle contains two rear seating posi-tions only and a seat belt for each seatingposition. Thus, never permit more than twooccupants to ride in the rear seat because anunrestrained occupant could be seriouslyinjured or killed in the event of a vehiclecrash.
CONTROLS AND EQUIPMENT
1- 8 FB070F1-F Seat Cushion Height Adjustment (Driver's seat only) (Not all models) To raise or lower the front part of the seat cush- ion, turn the knob forward or rearward.
SB070E1-E Lumbar support adjustment (Driver's seat only) (Not all models) Some models are fitted with adjustable driver seat lumbar support which may be used to in-crease the amount of lumbar support offered bythe seat back. Adjustment is performed by mov-ing the handle at the side of the backrest in aforward direction to increase the support.
HGK052-D
FIRM
SOFT
HGK050-D
SB070D2-E Head restraint adjustment To raise the head restraint, pull it up. To lower it, push it down whilst pressing the lock knob. Formaximum effectiveness in the event of an acci-dent, the restraint must be adjusted so that therestraint is approximately at the level of the seatoccupant's ears. The restraint must never be soadjusted that it is centred about the level of theseat occupant's neck. WARNING: Do not operate the vehicle with the restraintsremoved. The restraints provide protectionagainst neck injury when installed and cor-rectly adjusted.
HGK049-D
Lock knob
