2003 HONDA ACCORD Check system

[x] Cancel search: Check system

Page 279 of 380

HONDA ACCORD 2003 CL7 / 7.G Owners Manual The air cleaner element should be 
cleaned or replaced according to the
time and distance recommendations
in the maintenance schedule. 
Clean the air cleaner element by 
blowing compressed air through

Page 292 of 380

HONDA ACCORD 2003 CL7 / 7.G Owners Manual Run the air conditioning at least once 
a week during the cold weather
months. Run it f or at least ten
minutes while you are driving at a
steady speed with the engine at
normal operating temperature.

Page 325 of 380

HONDA ACCORD 2003 CL7 / 7.G Owners Manual Thecompactsparetirehasashorter 
tread lif e than a regular tire. Replace
it when you can see the tread wear
indicator bars. The replacement
should be the same size and design
tire, mounted on the same

Page 332 of 380

HONDA ACCORD 2003 CL7 / 7.G Owners Manual Turn the ignition switch to START 
(III). If the headlights do not dim,
check the condition of the f uses. If
thefusesareOK,thereisproba-
bly something wrong with the
electrical circuit for the igniti

Page 333 of 380

HONDA ACCORD 2003 CL7 / 7.G Owners Manual Turn of f all the electrical acces- 
sories: climate control, stereo
system, lights, etc.
Put the transmission in Neutral or
Park, and set the parking brake.
Open the hood and check the
physical condi

Page 337 of 380

HONDA ACCORD 2003 CL7 / 7.G Owners Manual If the temperature gauge stays at 
the red mark, turn of f the engine. 
Wait until you see no more signs 
of steam or spray, then open thehood. 
If there was no coolant in the 
reserve tank, you may a

Page 340 of 380

HONDA ACCORD 2003 CL7 / 7.G Owners Manual If the indicator remains on past three 
driving trips, or the f uel cap was not
loose or missing, have the car
checked by the dealer as soon as
possible. Drive moderately until the
dealer has inspecte

Page 341 of 380

HONDA ACCORD 2003 CL7 / 7.G Owners Manual If possible, do not take your car f or a 
state emissions test until the
readiness codes are set. To check if
they are set, turn the ignition ON (II),
but do not start the engine. The
Malf unction Ind
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 next >