2003 FORD MUSTANG oil

[x] Cancel search: oil

Page 1756 of 4378

FORD MUSTANG 2003  Workshop Manual DISASSEMBLY 
Engine 
SECTION 303-
01D: Engine — Mach I 4.6L (4V)  2003 Mustang Workshop Manual Special Tool(s) 
Impact Slide Hammer 
100-
001 (T50T-100- A)  Remover, Crankshaft Vibration 
Damper 
30

Page 1757 of 4378

FORD MUSTANG 2003  Workshop Manual Disassembly 
Manual transmission vehicles 
1. Remove the clutch and pressure plate. For additional information, refer to  Section 308 - 02  . 
2. Remove the flywheel. 
Automatic transmission vehicles

Page 1760 of 4378

FORD MUSTANG 2003  Workshop Manual 13. Disconnect the fuel pressure damper electrical connector. 
14. Disconnect the EGR vacuum regulator electrical connector. 
15. Disconnect the four LH fuel injector electrical connectors. 
16. Remov

Page 1762 of 4378

FORD MUSTANG 2003  Workshop Manual 21. Remove the upper intake manifold gasket. 
�zClean and inspect the sealing surfaces. 
22. Remove the RH coil cover. 
23. Disconnect the LH ignition coils.  Klj .  7 ba
  212003 Mustang Worksho

Page 1763 of 4378

FORD MUSTANG 2003  Workshop Manual 24. Disconnect the four RH fuel injector electrical connectors. 
25. Disconnect the engine coolant temperature (ECT) sensor. 
26. Disconnect the RH ignition coils. 
27. Remove the eight ignition coils

Page 1769 of 4378

FORD MUSTANG 2003  Workshop Manual 46.
NOTE:  Be careful when removing the gasket. It is reusable if not damaged. 
Remove the oil pan and the gasket.  Item  Part 
Number  Description 
1  N806177  Bolt, Hex Flange Head Pilot, M8 x 1.25

Page 1771 of 4378

FORD MUSTANG 2003  Workshop Manual 51. Remove the RH and the LH timing chains and crankshaft sprocket. 
52. Remove the RH and LH timing chain guides. 
53. Remove the RH and LH cylinder heads. 
54. Remove the oil filter adapter. 
1. Rem

Page 1772 of 4378

FORD MUSTANG 2003  Workshop Manual 55. Clean and inspect the oil filter adapter. 
�zFlush the adapter with parts cleaner. If metal particles are present, install a new oil filter 
adapter. 
56. Remove the bolts and the oil pump screen