2003 FORD MUSTANG transmission fluid

[x] Cancel search: transmission fluid

Page 2770 of 4378

FORD MUSTANG 2003  Workshop Manual 2.
 CAUTION: Align the index marks. 
Install the driveshaft. For additional information, refer to  Section 205 - 01  . 
3. Check the transmission fluid level, add fluid if necessary. 
4. Lower the veh

Page 2779 of 4378

FORD MUSTANG 2003  Workshop Manual 17. If transmission disassembly is necessary, drain the transmission fluid. 
18. Position a transmission jack and support the transmission. 
19. Remove the bolts and the transmission crossmember. 
20.

Page 2782 of 4378

FORD MUSTANG 2003  Workshop Manual 4.
NOTE:  Position a drain pan under the transmission. 
Remove the case plug, then rotate the transmission to a horizontal position. 
5. Using the special tools, remove the extension housing fluid sea

Page 2804 of 4378

FORD MUSTANG 2003  Workshop Manual 16. Remove the snap ring, then using the special tool, press off the first/second gear synchronizer. 
Assembly  1. Carry out the following before reassembling:  �zInspect the gears for broken or crack

Page 2824 of 4378

FORD MUSTANG 2003  Workshop Manual ASSEMBLY 
Transmission 
1. Lubricate all components with transmission fluid during assembly. 
2. Attach the clutch housing to the special tool. 
SECTION 308-
03B: Manual Transaxle/Transmission — TR3

Page 2840 of 4378

FORD MUSTANG 2003  Workshop Manual 52. Install the shift spring and bracket. 
53. Install a new split pin in the gear shift off-
set lever. 
�z The split pin should be flush in the gear shift off- set lever. 
54. Seat the extension hou

Page 2842 of 4378

FORD MUSTANG 2003  Workshop Manual shaft guide tube must be cleaned and lubricated. 
Install the clutch release hub and bearing and the clutch release lever. For additional 
information, refer to Section 308-
01. 
61. Fill the transmis

Page 2843 of 4378

FORD MUSTANG 2003  Workshop Manual INSTALLATION 
Transmission 
1. NOTE:  Before installing the transmission, the ball stud, clutch release lever and the input shaft 
must be cleaned and lubricated. Use Motorcraft Premium Long-Life Grea