2003 CADILLAC CTS Owners Manual

3-12

SCAN: Press the SCAN button to enter scan mode.
SCAN will appear on the display. Press the up arrow to
scan to the next station. The radio will go to a station,
play for 5 seconds, then go on to the next station.
Press this button again to stop scanning.
To scan preset stations, press and hold SCAN for more
than two seconds until you hear a beep and PSCAN
appears on the display. The radio will go to the first
preset station stored on your pushbuttons, play for
5 seconds, then go on to the next preset station.
Press SCAN again to stop scanning presets.
The radio will scan only to stations that are in the
selected band and only to those with a strong signal.LOCAL/DISTANCE Selection: With this feature you
can set the radio to search for local stations or stations
that are further away for a larger selection. To set this
feature to LOCAL or DISTANCE, perform the
following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until SEEK LOCAL or
SEEK DISTANCE appears on the display.
3. Press the TUNE/SEL knob to select either LOCAL
or DISTANCE.
4. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.
To search for stations, press the SEEK up or down
arrows. If the system is set to LOCAL, SEEK will
appear in the display. If the system is set to DISTANCE,
D
-SEEK will appear in the display. The radio will seek
to stations with a strong signal only.

3-13
Setting Preset Stations
The six numbered pushbuttons (F1 through F6) let
you return to your favorite stations. You can set up to
18 stations (six AM, six FM1 and six FM2). You can
set your preset stations manually or automatically and
presets for home and away.
To set your preset stations manually, perform the
following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1 or FM2.
3. Tune in the desired station.
4. Press and hold one of the six numbered pushbuttons
for two seconds until you hear a beep. The set preset
station number will appear on the display above the
pushbutton that it is set to. Whenever you press that
numbered pushbutton for less than two seconds, the
station you set will return.
5. Repeat the steps for each pushbutton.
To set your preset stations with an equalization
setting, DSP setting, or a PTY setting, see each of
these features later in this section. When a preset
station is selected, once one of these additional
settings is selected, the preset station will remember
each setting and it will remain active, until the
setting is selected off for that preset station.AUTOSTORE PRESETS: To set your preset stations
automatically, perform the following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1 or FM2.
3. Press the TUNE/SEL knob to enter the main menu.
4. Turn the TUNE/SEL knob until AUTOSTORE
PRESETS appears on the display.
5. Press the TUNE/SEL knob again to select.
AUTOSTORE will appear on the display. The radio
will automatically search the band and select and
store the six radio stations with the strongest signal.
The stations will be stored by signal strength, not
sequential order. The set preset station number will
appear on the display above the pushbutton that it is
set to. Whenever you press that numbered
pushbutton for less than two seconds, the station that
is set will return.
6. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.
When battery power is removed and later applied, you
will not have to reset your radio presets because they
remain in the radios memory.

3-14
PRESETS HOME/AWAY: This feature gives you the
ability to store two different kinds of station presets.
HOME can be used for stations available where you live
and AWAY can be for stations available outside of your
local broadcasting area. To set preset stations for home
and away perform the following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until PRESETS
HOME/AWAY appears on the display.
3. Press the TUNE/SEL knob to select your choice.
HOME or AWAY will appear on the display.
4. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.
Follow the manual or automatic steps previously listed
for setting your preset pushbuttons for both home
and away.Setting the Tone (Bass/Treble)
To adjust the bass, midrange, and treble, perform the
following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until
BASS
-MID -TREBLE appears on the display.
3. Press the TUNE/SEL knob to enter into the
tone settings.
4. Press the TUNE/SEL knob to scroll through
the settings.
5. Turn the TUNE/SEL knob to increase or to decrease
the bass, midrange or treble. If a station is weak or
noisy you may want to decrease the treble.
6. Press the TUNE/SEL knob to set your adjustment.
7. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.

3-15
AUDIO EQUALIZER: This feature allows you to
choose bass, midrange and treble equalization settings.
To choose a equalization setting (EQ0 through EQ5),
perform the following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until EQUALIZER
appears on the display.
3. Press the TUNE/SEL knob to set your equalization
setting. The equalization setting will appear on
the display.
4. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.
The equalization settings are preset to EQ0 (Normal),
EQ1 (Pop), EQ2 (Rock), EQ3 (Jazz), EQ4 (Talk), and
EQ5 (Country).Adjusting the Speakers (Balance/Fade)
To adjust the balance or fade, perform the
following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until
BASS
-MID -TREBLE appears on the display.
3. Press the TUNE/SEL knob to enter into the
tone settings.
4. Press the TUNE/SEL knob to scroll to BALANCE
or FADER.
5. Turn the TUNE/SEL knob to adjust the BALANCE
to the right or the left speakers and the FADER to the
front or the rear speakers.
6. Press the TUNE/SEL knob to set your adjustment.
7. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.

3-16
Using DSP
This feature is used to provide a choice of five different
listening experiences: DSP normal, talk, spacious, rear
seat and driver seat. DSP can be used while listening to
the radio, the cassette tape player or the CD player. The
radio keeps separate DSP settings for each band, preset
and source. To select a DSP choice, perform the
following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until one of the five
settings appears on the display.
3. Press the TUNE/SEL knob to select a DSP setting.
4. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.DSP NORMAL: This setting enhances the stereo
effects. DSP NORMAL will not be displayed when in
this mode.
TALK: This setting should be used when listening to
non
-musical material such as news, talk shows, sports
broadcasts and books on tape. TALK makes spoken
words sound very clear.
SPACIOUS: This setting is used to make the listening
space seem larger.
REAR SEAT: This setting adjusts the audio to give the
rear seat passenger(s) the best possible sound qualities.
Sound quality for the front seat passengers may be
different when this setting is used..
DRIVER SEAT: This setting adjusts the audio to give
the driver the best possible sound qualities. Sound
quality for the rear seat passengers may be different
when this setting is used.
OFF: When DSP is OFF, the system will provide the
best overall audio performance.

3-17
Using RDS
Your audio system is equipped with Radio Data Systems
(RDS). RDS features are available for use only on FM
stations that broadcast RDS information. Using this
system, the radio can:
1. receive announcements concerning local and
national emergencies,
2. seek to stations with traffic announcements,
3. display messages from radio stations and
4. search for a stronger station when a station is too
weak for listening.
If you are tuned to a station broadcasting RDS
information, the station's call letters and program
service name will replace the station's frequency on the
display. The program type and program type name may
be the same or different. If the radio is tuned to a station
that is not broadcasting RDS information, the station's
frequency will remain on the display. With RDS the
radio can search for a stronger station in the network
when a station gets too weak for listening if alternate
frequency is on.RDS Messages
ALERT: Alert warns of local and national emergencies.
When an alert announcement comes on the current radio
station or a related network station, ALERT will appear
on the display. You will hear the announcement, even if
the volume is muted or a cassette tape or compact disc is
playing. If the cassette tape or compact disc player was
being used, the tape or compact disc will stay in the
player and resume play at the point where it stopped
when the announcement has ended. You will not be able
to turn off alert announcements. If the radio tunes to a
related network station for the announcement, it will
return to the original station when the announcement
is finished.
The radio uses TA volume for alert announcements.
To increase or to decrease volume, turn the VOL knob.
The volume can not be turned completely down or off.

3-18
TA (Traffic Announcement): This feature allows the
radio to receive traffic announcements even with the
volume muted, or when a CD or cassette tape is playing.
When TA is on, the radio will search for another station
with TA if the current station is not TA capable. During
the search, TA will flash on the display. Once a TA
station is found, TA will appear on the display and the
traffic announcement will be played. If no station
broadcasting traffic announcements is found, No Traffic
will appear on the display.
While a traffic announcement plays, the radio uses a
special type of volume called TA volume. To increase or
to decrease TA volume, turn the volume knob. TA
volume can not be turned completely down or off. To
turn off TA volume and stop TA announcements, you
must turn TA off.
When a traffic announcement comes on the current radio
station or a related network station, you will hear it,
even if the volume is muted or a cassette tape or
compact disc is playing. If the radio tunes to a related
network station for a traffic announcement, it will return
to the original station when the announcement is
finished. If the cassette tape or compact disc player was
being used, the tape or compact disc will stay in the
player and resume play at the point where it stopped.To turn TA on or off, perform the following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until TRAFFIC
ANNOUNCE appears on the display.
3. Press the TUNE/SEL knob to select ON or OFF.
An X will appear in the box when TA is selected on.
4. Press the BACK button to exit the display. To return
to the original display keep pressing the BACK
button or wait for the display to time out.
MSG (Message): If the current RDS station has a
message, MSG will appear on the display. If the whole
message does not appear on the display, parts of the
message will appear every three seconds until the
message is completed. Once the complete message has
been displayed, MSG will disappear from the display
until another new MSG is received.
If you would like to display the message, perform the
following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until RECALL RDS
MESSAGE appears on the display.
3. Press the TUNE/SEL knob. The last message
displayed will be displayed again.

3-19
Activating PTY Stations
Program type (PTY) allows you to search for stations
with specific types of music. The selectable PTYs are
POP, EASY, TALK, CNTRY (Country), CLASS
(Classical), and JAZZ.
To activate program types, perform the following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until PROGRAM TYPE
MODE appears on the display.
3. Press the TUNE/SEL knob to select ON or OFF. An
X will appear in the box when PTY is selected on.
4. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.
Once program type is activated the PTYs will appear on
the display above the pushbuttons, in place of the preset
stations (if programmed). Press the pushbutton for the
PTY that you would like to listen to. Not all stations
support PTYs and pressing the pushbutton may not take
you to all of the stations with that music type.AF (Alternate Frequency): Alternate frequency allows
the radio to switch to a stronger station with the same
program type.
To turn AF on or off, perform the following steps:
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until ALTERNATE
FREQ. appears on the display.
3. Press the TUNE/SEL knob to select AF OFF, AF ON
or AF REG. An X will appear in the box when AF is
selected on.
4. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.
Radio Message
LOCKED: This message is displayed when the
THEFTLOCK

system has been activated. You must
return to the dealership for service.