2003 BUICK CENTURY warning light

[x] Cancel search: warning light

Page 117 of 344

BUICK CENTURY 2003  Owners Manual Ending Cruise Control
There are two ways to turn off the cruise control:
·Step lightly on the brake pedal, or
·move the cruise switch to OFF.
Ending Speed Memory
When you turn off the cruise control

Page 128 of 344

BUICK CENTURY 2003  Owners Manual Warning Lights, Gages and
Indicators
This part describes the warning lights and gages that may
be on your vehicle. The pictures will help you locate them.
Warning lights and gages can signal that some

Page 133 of 344

BUICK CENTURY 2003  Owners Manual Brake System Warning Light
Your vehicles hydraulic brake system is divided into two
parts. If one part isnt working, the other part can still
work and stop you. For good braking, though, you need
bo

Page 134 of 344

BUICK CENTURY 2003  Owners Manual Anti-Lock Brake System Warning
Light
If your vehicle has anti-lock brakes, this warning light
will come on for a few seconds when you turn the
ignition key to RUN. If the anti-lock brake system
warnin

Page 135 of 344

BUICK CENTURY 2003  Owners Manual If the transaxle shift lever is in any position other
than FIRST (1) or SECOND (2) and the warning
light stays on after your parking brake is fully
released, it means theres a problem with the
system

Page 136 of 344

BUICK CENTURY 2003  Owners Manual Engine Coolant Temperature Gage
You have a gage that
shows the engine coolant
temperature. If the
gage pointer moves into
the red area, your
engine is too hot!
This reading means the same thing as the

Page 142 of 344

BUICK CENTURY 2003  Owners Manual Security Light
The SECURITY light will
come on when you turn the
key to START and stay on
until the vehicle starts.
It will also ¯ash if your ignition key is too dirty or wet for
the PASS-Key
žII sy

Page 144 of 344

BUICK CENTURY 2003  Owners Manual Here are four things that some owners ask about. All
these things are normal and do not indicate that
anything is wrong with the fuel gage:
·At the gas station, the pump shuts off before the
gage rea